Baseus Bowie H1 Pro Noise-Cancelling Headphones User Manual
- June 12, 2024
- Baseus
Table of Contents
Baseus Bowie H1 Pro Noise-Cancelling Headphones
Product connection steps
Step 1 Turn it on
For the first time, press and hold the multi-function button for 2 seconds to
turn on the device. At this time, the red and white lights flash quickly and
enter the Bluetooth pairing.
Bluetooth connection
Turn on the Bluetooth function of the mobile phone, enter the search pairing
state, and select the device model: Baseus Bowie H1 ProWhen the connection is
successful, the light goes off. After subsequent use, the ear device will be
connected back to the device used for the last time, and the white light will
be displayed when the device is connected back flicker
Note: To connect the new Bluetooth device, long press the ANC key for 2
seconds, then the red and white lights will flash quickly, and the headset
will enter the pairing state.
Download the APP and bind the headset
Turn it off
- Press and hold the multifunction button for 4 seconds to turn off the headset.
Product function operation (wireframes, indicating corresponding buttons)
- Music mode
- Play/Pause: Click the multifunction button
- Previous: Long press – button for 1.5 seconds
- Next: Long press + for 1.5 seconds
- Volume minus: Click –
- Volume plus: Click the + key
- Activate the phone’s voice assistant: three-click multi-function button
- Pairing mode: Long press ANC button for 2 seconds
- Noise reduction mode switch: Click ANC button
- Note: The mode switching sequence is: Noise reduction on -> Normal mode -> Transparent mode
- Panorama mode switch: Double click ANC button
- Note: The mode switching sequence is: Normal mode -> Music mode -> Cinema mode
Phone mode
- Answer/Hang Up: Click the multi-function button
- Reject: Press and hold the multifunction button for 1.5 seconds
Charging power indicator
- When the headset is in the process of charging, the power indicator is long red; When the battery is fully charged, the battery indicator lights up white.
Restore factory Settings
- When the headset is on, turn off the Bluetooth of the mobile phone, and hold down the + and – keys for 4 seconds. The red light blinks three times, indicating success.
Intelligent double connection operation steps
- Firstly, turn on the Bluetooth of mobile phone A and search for “Baseus Bowie H1 Pro”. After completing the connection and pairing, click to turn off the Bluetooth;
- Then turn on the Bluetooth of B mobile phone and search for “Baseus Bowie H1 Pro” to complete the connection and pairing;
- Finally, turn on the Bluetooth of A mobile phone again, and the headset will automatically connect to A mobile phone, completing the function of A/B mobile phone connecting to the headset at the same time.
Note: If the headset has the pairing record of mobile phone A and mobile phone B, the headset will automatically connect to mobile phone A and mobile phone B at the same time the next time it is turned on.
APP usage and security
- Panoramic sound mode can be selected in the APP.
- EQ mode selection and custom adjustment can be performed in the APP.
- Noise reduction mode can be selected in the APP.
- Switch the low latency mode in the APP.
Note: Enter Settings – Open application – Application startup management – Manually open the “Beisi” APP: Allow self-startup, allow associated startup, allow background activities.
electronic information products hazardous substances declaration
Part name
| ****
Harmful substance or element
---|---
（pb）| （Hg）| （Cd）| （Cr Vl）| （PBB）| （PBDE）
PCB| X| O| O| O| O| O
plastic| O| O| O| O| O| O
Bat| O| O| O| O| O| O
attachments| O| O| O| O| O| O
cable| X| O| O| O| O| O
This form is prepared in accordance with SJ/T 11364.
- indicates that the content of the hazardous substance in all homogeneous materials of the part is below the limit requirements specified in GB/T 26572 standard.X: The content of the hazardous substance in at least one homogeneous material of the part exceeds the limit requirements specified in the GB/T 26572 standard.
- The product complies with the EU RoHS 2.0 Directive (2011/65/EU)
- Tips: The 5-year icon refers to the “environmental effective use period”, not the product quality assurance period. Electronic products contain lead, mercury, cadmium and other harmful substances, once used beyond the expiration date, harmful substances may cause pollution to the environment due to leakage or mutation, or cause serious damage to the human body and personal property. “Environmental protection period” means that all electronic products will be required to use within this effective period, and we will no longer be responsible for product quality if safety risks occur after the safe use period.
- Product safety information
- Please read all instructions and warnings before using this product, non-standard use will cause damage to the product or personal safety.
- contains batteries. Do not expose this product to strong sunlight or overheating environment such as a heater. Do not store this product in high temperature, strong light and strong magnetic field environment.
- Do not place the product in a harsh environment such as near a fire source. Do not knock, throw, trample, squeeze or put into the fire. Do not use the product if it appears swollen.
- Ambient temperature of the product: 0~45℃.
- Do not use the product in violation of the instructions, which may cause damage to the product or endanger the safety of human life and property.
- Non-professional personnel are strictly forbidden to disassemble this product, otherwise it may cause fire or even damage the product completely.
- Do not use the load that exceeds the output current of this product (electrical appliances), it will automatically stop working.
- Periodically clean the charging contact of the earphone with a clean cotton cloth to avoid failure to charge or start the earphone due to long-term uncleaning.
- Do not place this product in water (or washing machine). In case of water, please allow it to dry naturally before use.
Product parameters
- Name: Bex Headset noise cancelling headphones
- Model: Baseus Bowie H1 Pro
- Material: ABS+PC+ metal
- Bluetooth version: V5.3
- Communication distance: 10 meters
- Listening time: 70 hours (70% volume, noise reduction)
- 40 hours: (70% volume, noise reduction on)
- Battery capacity (L/R) : 400mAh/1.48Wh
- Headset Rated input: DC5V 1A
- Headset rated current consumption: 15 mA
- Charging time: about 1 hour
- Frequency response range: 20Hz-40kHz
- Charging interface: Type-C
- Suitable for: Playback devices with Bluetooth function
The above data comes from Baseus laboratory values, but the data may be different or incorrect due to changes in the objective environment
Packing list
- headset *1pcs
- Charging cable *1pcs
- Manual *1pcs
- Warranty card *1pcs
Related ICONS, product implementation stand ards, product safety warnings and additional supplier information.
Manufacturer: Shenzhen BSI Technology Co., LTD
- Address: 5th Floor, Building B, Beisi Intelligent Park, No. 2008, Xuegang Road, Gangtou Community, Bantian Street, Longgang
- District, Shenzhen
- Implementation standard: GB4943.1-2011
- Hotline: 4000-712-711
- Website: www.baseus.com
- CMIIT ID: XXXXXXXXX
- It is hereby affirmed that the product model of Shenzhen Shishang Chuang Exhibition Technology Co., Ltd. is Baseus Bowie H1 Pro in accordance with the provisions of EU Directives 2014/53/EU and 2011/65/EU. The full text of the EU Declaration of
- Conformity is available at www.baseus.com
- This equipment complies with the provisions of EU Directive 2012/19/EU and EU Directive 2006/66/EU, this equipment must not be disposed of with ordinary waste and must be recycled. This symbol indicates that this product shall not be disposed of as domestic waste, but must be handed over to the corresponding waste recycling station for electronic and electrical equipment recycling.
FCC STATEMENT
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>