pTron Tangent Pro ENC Wireless Neckband User Manual

pTron Tangent Pro ENC Wireless Neckband

Control Button Description

Power On & Pairing

1. To power On just detach the earbuds.
2. Blue & Red LED light vill blink alternatively to Enter Pairing mode.
3. Open Blutooth function on your Device and Search for the “pTron BT”
4. Click on pTron BT to connect.

Power Off

To power Off just attach both the earbuds together.

Bluetooth Connectivity Automatic

Just Turn On the Wireless Neckband. It will Automati­cally Connect to the Last Connected Device.

Voice Assistant Activation

Long Press MFB for 2 seconds to Awake your Phone’s Voice Assistant.

Note
MFB stands for Multi-function button.

Modes

There are 2 modes  Game & Music  Press MFB 3 times

Note
Music ,node is Default mode .

Call & Music Functions

• Answer/Hang up a Phone Call: Press MFB Once Reject a Phone Call: Press MFB for 2 seconds
• Music Play/Pause: Press MFB once
• Next Song: Long Press – button
• Previous Song: Long Press+ button
• Volume Up: Press+ button
• Volume Down: Press “-” button
• Re-dial: Press MFB twice in standby mode
• Mode change : Press MFB 3 times.

Note
M FB stands for Multi-function button

Dual Device Pairing

1. Connect pTron BT with phone 1 & switch off phone l s Bluetooth function.
2. Connect pTron BT with phone 2.
3. Now, switch on the Bluetooth function of phone 1.
4. It will get connected automatically.

Dual pairing functions

Play music in phone 1, you will listen from phone.

1. If you play rnusic in phone 2, phone 1 n1usic will pause & phone 2 music will continue.
2. On call if you are connected on phone 1 and there is an in corning call on phone 2.
3. You can receive/reject phone 2 call from MFB.

Note
If you need to cut phone 1 call you have do it manually from the phone or first cut phone 2 call than phone 1 call.

Charging the Neckband

1. Turn Off the Neckband before Charging.
2. Connect the Type-C end of the Charging cable to the Neckband.
3. Connect the USB end of the Charging cable to a Power Source such as USB Charger or other Charging Devices of SV Output.
4. Red LED light will be Steady during Charge. Once the Neckband is Fully Charged, Red LED indicator will Turn Off.
5. Un-plug Both the Ends of the Charging cable.

Troubleshooting

Scenario Connectivity Issue

1. Turn OFF the neckband and charge 100%.
2. Unpair with the connected Bluetooth device.
3. Restart the Bluetooth device.
4.  After 100% charging switch ON the neckband and pair it with the Bluetooth device again.

Disclaimer
The colors and specifications shown/mentioned in the user manual may differ from the actual product. Images shown are for representation purposes only. Other product logos and company names mentioned herein may be trademarks or trade names of their respective owners.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>