TOGUARD RC06 10 Inch Touch Apple Carplay Screen Player Audio Car Receiver with Stereo GPS Navigation User Manual

Carplay Screen Player
User Manual RC06

Product overview

The Smart Screen Players transmitted through Bluetooth and WiFi.

Product composition list

| FHD display(1600*600)/touch control/Bluetooth/Wi-Fi/FM Transmit/ Type  C interface power supply
---|---
| Type C power cord/5V/3Acurrent/ integrated cable / cigar lighter to take power
| 3.5 head audio cable Connect the aux interface on the car to transmit the equipment sound to the car audio
| To support the display and fix it on the center console
| In combination with the display, attach the display to the windshield of the car

Product description

10seconds/30seconds
Language| Simplified Chinese / Traditional Chinese/ English/Russian/Spanish/French/
Deutsch/ Japanese/Korean
Factory reset| Function of restoring to factory settings
Firmware version| Native software version
Smart + connected| WiFi| Supports Apple CarPlay and Android Auto
Bluetooth| Connect your phone to realize Carplay function
Fm Tronsmit| FM| FM Transmit support, connected to the car radio
Audio part| Voice control| Support voice operation function
Power part| The power input| The vehidle charging input terminal supports 12-24V wide voltage and outputs 5V/3A
Other| Working
temperature| – 4’150° F
The cooling way| Passive cooling

Wiring instructions

The details are as follows:

charger included. Please use the original car
charger. Other car chargers can support
Carplay due to insufficient voltage and heat
damage, the FM transmitter function can not
work normally if it is not a original car charger.

a. Installing reversing camera (Optional)

Confirm the position to install the reversing camera, mark the screw hole on license plate before installation. Please have to make sure drill appropriate size hole for the screw. The red wire of reversing camera have to connected to the  positive lead of reversing light

Tips: The reversing camera do not support video recording Reversing Lamp Positive Lead

b. Parking Line Calibration
Click [Calibration] to enter the settings: Park the car in the middle of the parking space.

Hold the X to adjust the reversing line position and angle, please make sure the parking line is horizontal of the ground.

Click [confirm ] to save the calibration.

Interface specification

1. Home button: Click to retum to home page
2. Brightness button: Click to adjust screen brightness
3. Volume button: Click to adjust the volume
4. Screen off: Click to close the screen display
5. Apple CarPlay: Special connector for iPhone
6. Android Auto: Special connector for Android mobile phone
7. Audio output: Select audio output mode
8. Bluetooth: Bluetooth name and status, The Bluetooth name can be changed manually, and it needs to be saved after the change
9. System settings

A. Apple CarPlay

As shown in the figure, click the [Apple CarPlay] button to enter the Apple CarPlay. Tum on the Wi-Fiand Bluetooth of the mobile phone first, then as shown in the figure below, select the [Apple CarPlay] option, click the Manage]  option of the interface, connect Bluetooth with the phone, you can open the application. When the machine is powered on, it will try to automatically connect to the last connected phone.

(Tun off your phone’s Wi-Fi to disconnect, Apple CarPlay option only supports iPhone phones, Android phone please select [Android auto] option)
(The specific connection method is as follows)

1. Open Carplay
   

2. Turn on the Bluetooth and WiFi switch on the mobile phone
   

3. Find the t86 xxxxx device name in other devices, Use CarPlay
   

4. Connection successful
   Tips: Hey, Sir, wake up your phone, listen to music, make phone calls, navigate, check the weather, etc. through your device
   

B. Android Auto

As shown in the figure, click the [Android Auto] button to enter the Android auto. Tum on the WiFi and Bluetooth of the mobile phone first, then as shown in the figure below, select the [Android auto] option, click the [BT Manage] option  of the interface, connect Bluetooth with the phone, you can open the application.
When the machine is powered on, it will try to automatically connect to the last connected phone.

(Tum off your phone’s Wi-Fi to disconnect)

1. Open Android Auto
   

2. To use Android Auto, Google Pixels phone needs to Android 8.0 or above.

3. For Android phones from other brand, the system needs to be Android 11 or above.

4. After connecting the Bluetooth device, it will automatically connect to the WiFi, please do not manually connect to the WiFi device again.
   

C. AirPlay Airplay supports transfer video, audio and pictures from iPhone to carplay by WiFi function.
Steps:

1. Require your iPhone connect to Carp lay’s WiFi
2. Select SmartScreen in Screen Mirroring in the iPhone Control Center

C. Bluetooth Music

You can find Bluetooth Music by clicking the button Apple CarPlay or Android Auto. Tum on Bluetooth of the mobile phone first, and select [Bluetooth Music] option. Click the [BT Manage] option on the interface to connect Bluetooth to  the mobile phone and start playing music.
The buttons correspond to Last, Play/Pause and Next, respectively. Clack on the Lyrics button [②]to display the lyrics.
(Some mobile music player apps do not support displaying lyrics)

D. Bluetooth

As shown in the figure above, click the Bluetooth button[ ] to switch on the device after entering the Bluetooth interface.
The page will display the device name, such as:T86- 1xxxxx,and click the Modify button[ ]to modify the Bluetooth name of the device.
Select the device name with Bluetooth, and the remote device name of the phone will appear after successfully connecting.

At this time, you can play mobile phone music and other functions.
After connecting to Bluetooth, you can use the call function:

click the Disconnect button ]to actively disconnect the Bluetooth.

E. Audio output

1. Speaker output: The sound is played by the speaker of the machine.2BT output please use your phone to connect the Bluetooth of the original Car stereo.
   

FM Transmit

As shown in the figure, click the [FM Transmit] button to enter the FM Transmit function: it can emit the sound of the equipment, receive it with the original car radio, and play it through the original car home, enjoying the original car  level.
When you tum on the FM Transmit option, the monitor will no longer emit any sound. At this time, you need to term off the FM Transmit or match the sound to the car’s built in stereo to have sound.

(Not using the original power cord will cause the FM Transmit signal to deteriorate or the function cannot be used.)

1. Selects the frequency band to be emitted, for example, the FM 106.0 MHZ

2. Car radio also adjusts the acceptance band to FM106.0 MHZ.

3. Car radio can connect to the FM Transmit signal of the upper system.
   After the FM launch connection is successful, all sounds will be sent to the original car speaker for play. (Recommended FM:100-108MHz)
   

4. AUX output: The sound is played from the AUX line output
   

F. Setting

As shown in the figure, click the[1]button in the lower left comer to enter the setting interface

Turnoff  /off /1min/10seconds/ When set for 1 or 5 minutes, the system operates for  no corresponding time, and the screen will
| Click [Language] to enter the settings: Language can be set up: Simplified Chinese/ traditional Chinese/English/Russian/Spanish/French/ German/Japanese/Korean
Icon| specification
---|---

Screen save

| Click [Screen saver] to enter the settings Screen savers can be set to: Turnoff  /off /1min/10seconds/ When set for 1 or 5 minutes, the system operates for  no corresponding time, and the screen will

Language

| Click [Language] to enter the settings: Language can be set up: Simplified Chinese/ traditional Chinese/English/Russian/Spanish/French/ German/Japanese/Korean

Reset factory

| dlick [Reset factory] to enter the Settings Restore the factory settings, and  you restore all the settings to the initial state.

Firmwyare version

| Click on [Firmware Version] to enter the menu This option is available in the  current basic version for easy confirmation.

FAQ:

1. Because the output current is unstable when the car starting, please tum off the FM before stopping the car, othenwise the FM will make noise when you starting the car again.
2. When you use the FM to connect the carplay, please don’t use the same frequency as the broadcast, otherwise the carplay will be frequency bumping and no sound. you can use the AUX cable to connect the carplay, which can  effectively solve this problem.
3. After our research, it will affect some functions of the carplay and reduce the customer’s experience when the carplay is equipped with a camera, so we remove the camera function to bring you the most extreme service
4. After connection to the Carplay/Android Auto, please wait for 10-20 seconds, and then the system will Auto Connect the your phone.
5. Before connecting again, please tum on Bluetooth and WiFi, the system will auto connection your mobile phone.
6. Please according our suggested to connect the power circuit, and avoid interference when the machine is started.

FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential  installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no  guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged  to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

ISED Statement
‐ English: This device complies with Industry Canada license‐exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
The digital apparatus complies with Canadian CAN ICES‐3 (B)/NMB‐3(B).
This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>