Gooseneck Electric Kettle 0.8L Pour Over Coffee and Tea Kettle Instruction Manual

June 12, 2024
GOOSENECK

Gooseneck logo Electric Kettle 0.8L Pour Over Coffee and Tea Kettle
Instruction ManualGooseneck Electric Kettle 0.8L Pour Over Coffee and
Tea Kettle

 Electric Kettle 0.8L Pour Over Coffee and Tea Kettle

Please read this manual carefully before us-ing the product.
Please keep this instruction manual properly Executive standard: GB 4706.1-2005 GB 4706.19-2008
The technical specifications in this manual are subject to change without notice
When the pattern is deviated, the actual product shall prevail.

Safety warning prompt

Please read this instruction manual carefully before using the product, and keep it in a safe place.

  1. Check whether the power supply voltage you are using matches the rated voltage of the product.
  2. When the electric kettle is working normally, please do not open the lid to avoid scalding
  3. The electric kettle can only be used with the attached base, and this base cannot be used for other purposes.
  4. Do not let the power cord hang on the edge of the table or touch the hot surface.
  5. Do not put the host in water or wash it in a dishwasher, so as not to damage the host.
  6. Please do not use components from non-designated manufacturers.
  7. The product power cord must be plugged into a power outlet with a grounding wire.
  8. This product is only used for boiling water, and must not be used for coffee, tea, alcohol or chemicals.
  9. Do not place the machine on a hot surface or close to the fire source, so as not to damage the machine.
  10. To prevent electric shock and fire, do not immerse the power cord or plug in water or other liquids.
  11. Before cleaning or when the machine is not in use, please turn off the machine first, and then unplug it. After the standby unit is suffici-ently cooled down, the parts can be disassembled or cleaned.
  12. Please place this product on a flat table to ensure that the kettle and the base will not tip over. Be careful not to splash water into the base.
  13. If a dry-burning trip occurs, first unplug the power plug. let the mach-ine cool for 15 minutes. and then fill it with cold water. The jumper design will automatically return to normal.
  14. Warning: If the power cord is damaged, in order to avoid danger, it must be repair department or similar professional replacement.
  15. When the power cord, plug. or other electrical parts are damaged in any way, stop using this product and contact the company’s serv-ice center for repair.
  16. The appliance is not intended to be used by people (including child-ren) who have physical, sensory or mental deficiencies or lack exp-erience and knowledge in use, unless someone responsible for their safety supervises or instructs them in relation to the use of the appliance. Children should be taken care of and ensure that they do not play with this appliance.

Note:

  1. Make sure that the electric kettle is turned off before removing the base.
  2. If the appliance is filled with water too much, boiling water may be sprayed from the spout.
  3. The connector must be removed before cleaning the appliance.
  4. The appliance socket must be wiped dry before the appliance is used again.

Warning

  1. Close the lid to prevent steam from spraying onto the handle.
  2. When the water is boiling, do not move the lid.
  3. The appliance must not be placed in water.

Product introduction

Remarks: The following product pictures are general schematic diagrams, please refer to the actual product, thank you!

Gooseneck Electric Kettle 0.8L Pour Over Coffee and Tea Kettle -
overview

Product name Electric kettle
Product model ZK-KH2O1 ZK-KH301 ZK-KH303
Voltage 110-220V
Rated power 800W/1000W
Rated capacity 0.8L 0.9L 1.0L
Packing size 25.5×19.5×18.9cm

Remarks: The company reserves the right to change the design of the product. The product you purchased may have been improved and is not completely consistent with the manual. I will not notify you separately. Please refer to the actual product! But it will not change its performance and method of use, please rest assured use.

First use

  1. Make sure that all packaging materials have been removed.
  2. Use a lint-free cloth or sponge to wipe the body of the kettle.
  3. Before using for the first time, boil the water first, and then pour it out, the product can be used.

Operation steps

Applicable to machinery

  1. Alter opening the lid, pour water directly into the kettle, and then close the lid.
    Note: The volume of the injected water must be within the range of the maximum: if the water volume exceeds the maximum scale. the water may sp-ray from the spout when boiling. Out. In addition, ensure that the lid must be completely closed before the kettle is connected to the power source.

  2.  Place the kettle on the platform, plug the power tail into the socket, and then turn on the power.

  3. Put the kettle on the base. After the power is turned on. press the switch button down, the light will be on. and the water will start to be boiled.
    Note: Ensure that the switch is not dry and the lid is closed. If the swit-ch is obstructed or the lid is opened, the kettle will not automat-ically cut off the power when the water is boiling

  4. . Unplug the power cord from the socket. then lift the kettle body and pour the water into the corresponding container.
    Note: When pouring boiling water, please be very careful when operat-ing. and do not open the kettle when there is hot water in the ket-tle cover to avoid burns.

  5. When the kettle is not in use or needs to be cleaned, turn off the power.

Clean and protect

Before cleaning, be sure to unplug the kettle from the power socket. Do not im-merse the kettle or the power base in water or get wet to prevent leakage.
Appearance clean:
You can clean the outer surface of the kettle with a damp soft cloth. Do not use toxic detergents to clean it. Removal of deposits: Minerals in tap water or nondistilled water may depositon the bottom of the kettle and cause dirt. In order to remove these de-posits. use detergents and harmless cleaning agents to clean them.
Choose any of the following Iwo methods

  1. Fill the kettle with a mixture of 3 cups of white vinegar and water, soak it overnight for use. (No need to boil water)
  2. Pour out the liquid in the kettle. wipe off the residue in the mouth of the kettle with a damp cloth, then fill the kettle with pure water, and pour out the water after boiling. After repeating it again, the kettle is ready for use.

Note: Do not use chemicals, iron, wood chips or other abrasives to clean them.
Thank you for choosing the electric kettle series. When using, please operate according to this manual. This product is only for use in homes or similar places.
Gooseneck logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals