PSM051 Cable Drum Jack Instructions

June 12, 2024
PSM

PSM051 Cable Drum Jack

Product Information

  • Product Name: Cable Drum Jack – 3 Ton SWL
  • Model Number: PSM051

Description: Heavy duty screw type cable drum jacks with a capacity of 3-ton SWL each (6-ton SWL per pair). Supplied complete with spindle bar and locking collars.

Specifications:

  • Minimum Drum Diameter: 1360mm
  • Maximum Drum Diameter: 1900mm
  • Base Area: 460x300mm

Manufacturer: PSM Plant & Tool Hire Centres Ltd Head Office Address: 253/255 Blackfen Road, Blackfen, Kent DA15 8PR

Contact Information:

  • Telephone: 020 8850 5658
  • Fax: 020 8859 4377
  • Email: info@psmhire.co.uk
  • Website: www.psmhire.co.uk

Product Usage Instructions

  1. Place the cable drum jack on a stable and level surface.
  2. Ensure that the locking collars are securely fastened to the spindle bar.
  3. Position the cable drum on top of the jack, ensuring it fits within the specified minimum and maximum drum diameters.
  4. Tighten the locking collars to secure the drum in place.
  5. Make sure the drum is balanced and stable before proceeding.
  6. To lift the drum, rotate the screw type mechanism using the spindle bar.
  7. Continue rotating until the desired height is reached.
  8. Ensure that the drum remains stable during lifting and lowering.
  9. To lower the drum, rotate the screw type mechanism in the opposite direction.
  10. Once the drum is lowered to the desired position, secure it by tightening the locking collars.

Heavy duty screw type cable drum jacks. Capacity of 3-ton SWL each (6-ton SWL per pair). Supplied complete with spindle bar and locking collars.

  • Min Drum Diameter: 1360mm
  • Max Drum Diameter: 1900mm
  • Base Area: 460x300mm

Operation Instructions

  • Ensure the jacks are suitable for the size and weight of drum to be lifted.
  • Check the jacks and spindle for signs of damage or wear.
  • Ensure the correct spindle supplied with the jacks is always used.
  • We recommend using spindle locking collars with the jacks and spindle bar.
  • Place the jacks on a level surface free from any bumps or dirt.
  • Place the spindle through the centre hole of the drum to be lifted. Ensure that the spindle is central to the drum, i.e. equal amounts of the spindle protrude from the sides of the drum.
  • Fit the locking collars to each side of the spindle so that they are up against the side of the drum. Tighten the locking bolts on the collars using a spanner.
  • Position the jacks as close as possible to the side of the drum. The distance between the cup of the jack and the side of the drum should be kept to an absolute minimum. The centre line of the jack cup should line up with the centre line of the spindle.
  • Using a suitable bar, wind the jacks up until both sides are touching the spindle. Now alternate between each jack to raise the drum, ensure that neither side is raised too much, keeping the drum as level as possible.

PSM PLANT & TOOL HIRE CENTRES LTD

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals