toolflex Tools Storage System Instruction Manual
- June 12, 2024
- toolflex
Table of Contents
toolflex Tools Storage System
Product Information
The Toolflex System is designed to help you keep everything in place, making it perfect for organizing smaller spaces. It is important to note that assembly should be carried out by a qualified person to avoid injury or damage. The system includes wall brackets, a rail, and a seal.
Specifications:
- Maximum Load: Up to 50 kg / 110 lbs on solid walls, up to 25 kg/55 lbs on soft wall material
- Dimensions: Rail length – 94 cm / 37 inches; Wall bracket spacing – 41 cm / 16 inches or 82 cm / 32 inches
Additional Information:
The Toolflex System can be mounted on different wall materials, but it is
recommended to consult with a qualified person to determine the appropriate
screws for your specific wall type.
For further assistance, you can visit the website www.toolflex.com or scan the QR code provided for a mounting video.
Product Usage Instructions
Assembly:
- Fit the seal to the back of the wall brackets. Note that the seal only fits one way.
- Place the template on the wall and mark the wall through the holes in the template. Use a spirit level for accurate positioning.
- Screw the wall brackets in position on the markings. Use the screws supplied and dowels if necessary.
- Install the rail along the wall brackets. First, insert the top edge of the rail into the wall brackets before clicking the lower edge in place.
- Close the wall bracket at its lower edge. A click will be heard when the bracket is properly closed.
- Ensure that the tab on the holder points down.
Disassembly:
- Remove all tools before removing the rail.
- Open all wall brackets before releasing the rail.
- To release the rail, click it out at the lower edge and then remove it.
Assembly
Install the wall brackets at each end of the rail (use an extra bracket in the middle of the 94 cm/37” rail).
- Fit the seal to the back of the wall brackets. Note that the seal only fits one way.
- Place the template on the wall (see back). Use a spirit level. Mark the wall through the holes in the template.
- Screw the wall brackets in position on the markings. Use the screws supplied (and dowels as necessary).
- Install the rail along the wall brackets. First, insert the top edge of the rail in the wall brackets before clicking the lower edge in place.
- Close the wall bracket at its lower edge. A click will be heard when the bracket is properly closed.
- Install the holder by hooking the top at a 45° angle. Press until a click is heard.
- The tab on the holder must point down.
Disassembly
- Remove all tools before removing the rail.
- All wall brackets must be opened before the rail is released.
- To release the rail, first, click it out at the lower edge and then remove it.
Dimension
Dowels are suitable for 5 mm screw holes.
Up to 50 kg/110 lbs max load on an installation in solid wall, and up to 25 kg/55 lbs in soft wall material.
The Toolflex System helps you to keep everything in place. Perfect for organization in smaller spaces. Assembly should be carried out by a qualified person, because wrong assembly may cause injury or damage.
Scan the QR code for download of mounting video or visit toolflex.com.