hansgrohe 4941000 24 Inch Croma Select E Wallbar Set Instruction Manual
- June 4, 2024
- hansgrohe
Table of Contents
hansgrohe 4941000 24 Inch Croma Select E Wallbar Set
Installation
Technical Information
Max. flow rate
- 04941xx0, 04939xx0 2.5 GPM (9.5 l/min)
- 04790xx0, 04940xx0 1.75 GPM (6.6 l/min)
Installation Considerations
- For best results, Hansgrohe recommends that this unit be installed by a licensed, professional plumber.
- Please read over these instructions thoroughly before beginning installation. Make sure that you have all tools and supplies needed to complete the installation.
- The screws and anchors included with this set are suitable for use in a tile or other solid surface wall. They are not suitable for use in an acrylic or fiberglass shower enclosure. Please contact the manufacturer of the enclosure regarding recommended mounting locations, reinforcement requirements, and mounting hardware.
- This unit does not include a wall supply. It must be used with Hansgrohe model 27458xx3 or another approved supply that complies with ASME A112.18.1/CSA B125.1 including ASME A112.18.3.
- To prevent scald injury, the maximum output temperature of the shower mixing valve (not included) must be no higher than 120°F (49° C). In Massachusetts, the maximum output temperature can be no higher than 112°F (44° C).
- 04941xx0, 04939xx0 only: This showerhead is for use with automatic compensating valves rated at 1.9 GPM (7.2 l/min) or less.
- 04790xx0, 04940xx0 only: This showerhead is for use with automatic compensating valves rated at 1.3 GPM (4.9 l/min) or less.
- The wallbar is intended to hold a handshower. Do not use it as a grab bar. If a grab bar is required, install one separately.
- Keep this booklet and the receipt (or other proof of date and place of purchase) for this product in a safe place. The receipt is required should it be necessary to request warranty parts.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>