LG 32GR93U LED Monitor User Guide

CONFIDENTIAL
SERVICE MANUAL
LED MONITOR
SERVICE MANUAL
CHASSIS : LM33A
MODEL : 32GR93U

CAUTION
BEFORE SERVICING THE CHASSIS, READ THE SAFETY PRECAUTIONS IN THIS MANUAL.

General Specification

• : Item to write directly.
• : Item you select from the list. (If the selected item is not on the list, ask the person in charge to add it and update the template)
  – When adding a derivative model, change the name of the sheet after copying and adding the sheet. ex) 1. General Spec (derivative model name)

*Remark
---|---|---|---|---|---
11| Sensor Option| ALS| NO| |
FAN| YES| Internal|
TEMP| NO| |
IR| NO| |
Webcam| NO| |
Gyro| NO| |
No| Category| Item*| Provide| Color| Length| Weight| P/N| Remark
---|---|---|---|---|---|---|---|---
12| Accessory| AccessoryBox| NO| | | | |
Adapter| YES| Black| | | EAY63032212| 19Vdc 5.79A 50~60Hz ADS-120QL-19A-
| |
| |
| |
| |
PSU| NO| | | | |
|
|
Power Cord| YES| Black| 1.55M| | EAD62348835|
Power Extention| NO| | | | |
DP| YES| Black| 1.8M| | EAD65185308| Label : 5K
HDMI| YES| Black| 1.8M| | EAD65912803| HDMI 2.1 cable
USB-C to C| NO| | | | |
USB-A to B(2.0)| NO| | | | |
USB-A to B(3.0)| YES| Black| 1.8M| | EAD65573101|
Thunderbolt| NO| | | | |
DVI| NO| | | | |
D-Sub| NO| | | | |
Remote Control Reciever| NO| | | | |
Remote Controller| NO| | | | |
Webcam Assembly| NO| | | | |
Color Calibrator| NO| | | | |
USB-C to A Gender| NO| | | | |
No| Category| Type| Support| Data| Remark
---|---|---|---|---|---
13| Input Voltage| | | AC 100-240Vac~ 50/60Hz|
14| Power Rating| Adapter| YES| 19V 5A|
PSU| NO| |
No| Category| Item| Data**| *Remark
---|---|---|---|---
15| Reliability| MTBF| 30,000 HRS with 90% confidence level|
Using Altitude| 10,000 feet(3,048m) for Reliability 40,000 feet(12,192m) for Storage / Shipment|
Environment Condition| Operating| Temperature : 0°C ~ 40°C
Humidity : Less than 80%|
Storage| Temperature : -20°C ~ 60°C Humidity : Less than 85%|

Signal Timing

↓↓↓ Place the cursor on the lower column (B4) and paste
1) HDMI

No.| Resolution| Horizontal Freqency(kHz)| Vertical Frequency(Hz)| polarity(H/V)| Remark| section| Dot Clock [MHz]| Total Period(E)| Display (A)| Front Porch(D)| Sync. (C)| Back Porch(B)
---|---|---|---|---|---|---|---|---|---|---|---|---
1| 640 x 480| 31.469| 59.940| -/-| | H(Pixels)| 25.175| 800| 640| 16| 96| 48
V(Lines)| 525| 480| 10| 2| 33
2| 800 x 600| 37.879| 60.317| +/+| | H(Pixels)| 40.000| 1056| 800| 40| 128| 88
V(Lines)| 628| 600| 1| 4| 23
3| 1024 x 768| 48.363| 60.004| -/-| | H(Pixels)| 65.000| 1344| 1024| 24| 136| 160
V(Lines)| 806| 768| 3| 6| 29
4| 1280 x 720| 45.000| 60.000| +/+| | H(Pixels)| 64.000| 1440| 1280| 48| 32| 80
V(Lines)| 741| 720| 3| 5| 13
5| 1280 x 1024| 79.976| 75.025| +/+| | H(Pixels)| 135.000| 1688| 1280| 16| 144| 248
V(Lines)| 1066| 1024| 1| 3| 38
6| 1920 x 1080| 67.500| 60.000| +/+| | H(Pixels)| 148.500| 2200| 1920| 88| 44| 148
V(Lines)| 1125| 1080| 4| 5| 36
7| 1920 x 1080| 66.587| 59.934| +/-| | H(Pixels)| 138.500| 2080| 1920| 48| 32| 80
V(Lines)| 1111| 1080| 3| 5| 23
8| 3840 x 2160| 65.688| 29.981| +/-| Recommended Timing – Input Compatibility Version : 1.4| H(Pixels)| 262.750| 4000| 3840| 48| 32| 80
V(Lines)| 2191| 2160| 3| 5| 23
9| 1920 x 1080| 166.668| 144.052| +/-| | H(Pixels)| 346.670| 2080| 1920| 8| 32| 120
V(Lines)| 1157| 1080| 63| 8| 6
10| 2560 x 1440| 182.996| 119.998| +/-| | H(Pixels)| 497.750| 2720| 2560| 48| 32| 80
V(Lines)| 1525| 1440| 3| 5| 77
11| 3840 x 2160| 133.313| 59.997| +/-| Recommend Timing – Input Compatibility Version : 2.1 (AV)| H(Pixels)| 533.250| 4000| 3840| 48| 32| 80
V(Lines)| 2222| 2160| 3| 5| 54
12| 2560 x 1440| 222.268| 144.050| +/-| | H(Pixels)| 604.570| 2720| 2560| 8| 32| 120
V(Lines)| 1543| 1440| 89| 8| 6
13| 3840 x 2160| 333.333| 144.050| +/-| Recommend Timing – Input Compatibility Version : 2.1 (PC)| H(Pixels)| 1333.330| 4000| 3840| 8| 32| 120
V(Lines)| 2314| 2160| 140| 8| 6

2) DP

No.| Resolution| Horizontal Freqency(kHz)| Vertical Frequency(Hz)| polarity(H/V)| Remark| section| Dot Clock [MHz]| Total Period(E)| Display (A)| Front

Porch(D)

| Sync. (C)| Back Porch(B)
---|---|---|---|---|---|---|---|---|---|---|---|---
1| 640 x 480| 31.469| 59.940| -/-| | H(Pixels)| 25.175| 800| 640| 16| 96| 48
V(Lines)| 525| 480| 10| 2| 33
2| 800 x 600| 37.879| 60.317| +/+| | H(Pixels)| 40.000| 1056| 800| 40| 128| 88
V(Lines)| 628| 600| 1| 4| 23
3| 1024 x 768| 48.363| 60.004| -/-| | H(Pixels)| 65.000| 1344| 1024| 24| 136| 160
V(Lines)| 806| 768| 3| 6| 29
4| 1280 x 720| 45.000| 60.000| +/+| | H(Pixels)| 64.000| 1440| 1280| 48| 32| 80
V(Lines)| 741| 720| 3| 5| 13
5| 1280 x 1024| 79.976| 75.025| +/+| | H(Pixels)| 135.000| 1688| 1280| 16| 144| 248
V(Lines)| 1066| 1024| 1| 3| 38
6| 1920 x 1080| 67.500| 60.000| +/+| | H(Pixels)| 148.500| 2200| 1920| 88| 44| 148
V(Lines)| 1125| 1080| 4| 5| 36
7| 1920 x 1080| 166.587| 143.981| +/-| | H(Pixels)| 346.500| 2080| 1920| 48| 32| 80
V(Lines)| 1157| 1080| 3| 5| 69
8| 3840 x 2160| 133.313| 59.997| +/-| Recommended Timing – Input Compatibility Version : 1.2| H(Pixels)| 533.250| 4000| 3840| 48| 32| 80
V(Lines)| 2222| 2160| 3| 5| 54
9| 2560 x 1440| 222.151| 143.973| +/-| | H(Pixels)| 604.250| 2720| 2560| 48| 32| 80
V(Lines)| 1543| 1440| 3| 5| 95
10| 3840 x 2160| 214.680| 95.033| +/-| | H(Pixels)| 858.720| 4000| 3840| 8| 32| 120
V(Lines)| 2259| 2160| 85| 8| 6
11| 3840 x 2160| 268.438| 119.999| +/-| Recommended Timing
– Input Compatibility Version : 1.4| H(Pixels)| 1073.750| 4000| 3840| 8| 32| 120
V(Lines)| 2237| 2160| 3| 5| 69
12| 3840 x 2160| 333.333| 144.050| +/-| Recommended Timing
– Input Compatibility Version : 1.4(DSC)| H(Pixels)| 1333.330| 4000| 3840| 8| 32| 120
V(Lines)| 2314| 2160| 140| 8| 6

3) HDMI Video input (for Manual)

No.| Factory support mode (Preset Mode)| Horizontal Freqency(kHz)| Vertical Frequency(Hz)| VIC| Remark
---|---|---|---|---|---
1| 480P| 31.5| 60| 0x01|
2| 720P| 45| 60| 0x04|
3| 1080P| 67.5| 60| 0x10|
4| 1080P| 135| 120| 0x3F|
5| 2160P| 135| 60| 0x61|
6| 2160P| 255| 120| 0x76|

SAFETY PRECAUTIONS

IMPORTANT SAFETY NOTICE
Many electrical and mechanical parts in this chassis have special safety- related characteristics. These parts are identified by in the Exploded View.
It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent Shock, Fire, or other Hazards.
Do not modify the original design without permission of manufacturer.

General Guidance
An isolation Transformer should always be used during the servicing of a receiver whose chassis is not isolated from the AC power line. Use a transformer of adequate power rating as this protects the technician from accidents resulting in personal injury from electrical shocks.
It will also protect the receiver and it’s components from being damaged by accidental shorts of the circuitry that may be inadvertently introduced during the service operation.
If any fuse (or Fusible Resistor) in this TV receiver is blown, replace it with the specified.
When replacing a high wattage resistor (Oxide Metal Film Resistor, over 1 W), keep the resistor 10 mm away from PCB.
Keep wires away from high voltage or high temperature parts.
Before returning the receiver to the customer, always perform an AC leakage current check on the exposed metallic parts of the cabinet, such as antennas, terminals, etc., to be sure the set is safe to operate without damage of electrical shock.
Leakage Current Cold Check(Antenna Cold Check)
With the instrument AC plug removed from AC source, connect an electrical jumper across the two AC plug prongs. Place the AC switch in the on position, connect one lead of ohm-meter to the AC plug prongs tied together and touch other ohm-meter lead in turn to each exposed metallic parts such as antenna terminals, phone jacks, etc.
If the exposed metallic part has a return path to the chassis, the measured resistance should be between 1 MΩ and 5.2 MΩ.
When the exposed metal has no return path to the chassis the reading must be infinite.
An other abnormality exists that must be corrected before the receiver is returned to the customer.

Leakage Current Hot Check (See below Figure)
Plug the AC cord directly into the AC outlet.
Do not use a line Isolation Transformer during this check.
Connect 1.5 K / 10 watt resistor in parallel with a 0.15 uF capacitor between a known good earth ground (Water Pipe, Conduit, etc.) and the exposed metallic parts.
Measure the AC voltage across the resistor using AC voltmeter with 1000 ohms/volt or more sensitivity.
Reverse plug the AC cord into the AC outlet and repeat AC voltage measurements for each exposed metallic part. Any voltage measured must not exceed 0.75 volt RMS which is corresponds to 0.5 mA.
In case any measurement is out of the limits specified, there is possibility of shock hazard and the set must be checked and repaired before it is returned to the customer.

Leakage Current Hot Check circuit

When 25A is impressed between Earth and 2nd Ground for 1 second, Resistance must be less than 0.1 *Base on Adjustment standard

Block Diagram – 27GR93U/32GR93U

EXPLODED VIEW

IMPORTANT SAFETY NOTICE
Many electrical and mechanical parts in this chassis have special safety- related characteristics. These parts are identified by in the EXPLODED VIEW.
It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent Shock, Fire, or other Hazards.
Do not modify the original design without permission of manufacturer.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>