imperii TT FIEPRO SmartBand Rainbow Instruction Manual
- June 7, 2024
- imperii electronics
Table of Contents
imperii TT FIEPRO SmartBand Rainbow
INSTRUCTIONS FOR THE USER
Thank you for choosing our smart watch.
Please be sure to carefully read the Instructions In this manual before using
it. Improper use will provide erroneous or inaccurate readings, and a less
satisfactory experience. Once you have the product, turn it on to check if
there is any remaining battery or if you need to charge it already. This
equipment can be charged in two ways, one through its own USB port, and
another through the loading clip.
Instructions for charging via the USB port:
According to the instructions above, first use Method 1, with the left hand
holding the body of the watch, turn about 45 degrees clockwise. and after
removing the strap, plug the USB into the adapter to charge.
According to the instructions above, with the left hand holding the body of
the watch, and with the right hand grasping the strap, pull it at a 45 degree
angle, and follow the instructions below to load.
Remove the strap, please connect the main body to a USB port (such as the PC,
a portable power bank, or a standard adapter) to charge the equipment, it
needs 5V1A or 5V2A as input voltage.
INSTALL THE APP
Scan the QR code or install the “FltCloud” app from the App Store or from Google Play.
System requirements: Android 4.4or higher, iOS 8.0 or higher (from iPhone 4.1 onwards) and Bluetooth 4.0.
LINKING THE DEVICE
a. Open the Bluetooth of your mobile.
b. Open the App-> Enter the Settings/ Settings page-> Click on “Bind
device” to search the device, and automatically-> Click on the name of the
device found -> Linking done.
c. If your mobile is an iPhone, click “Link/ Pair” when a message appears
on the phone indicating “Bluetooth pairing request”.
FUNCTIONS
Turn on / off (press and hold In both cases)
Incoming call notification (shows name or phone number)
Push notification of messages from Facebook, WhatsApp, Line, etc. You can
also show the content of the message
MAIN CHARACTERISTICS
- Device type: Smartband
- Screen type: 80x160TFT
- Weight: 14.5g
- Length: 25cm
- Belt stuff: Silicone
- Degree of impermeability: IP67
- Battery capacity: 105mAh
- Battery type: Lithium Polymer
- Working temperature: -10 to 50’C
- Synchronization method: Bluetooth 4.0
- Included in the package: Smart, charging cable, instructions
INTERFACE
MAIN INTERFACE
As you can see In the figure on the left, this is the main interface of the
bracelet. This interface shows the status of the Bluetooth connection,
information about the battery status, time and date.
When in this main interface, press and hold the touch button for 3 seconds to
start the clock selection.
Click on the touch button to select, and press and hold the button for 3
seconds to save the configuration.
STEP INTERFACE
On your left you seethe step interface. It mainly shows the total of steps
taken during the day.
This content can also be seen in the App of your mobile after linking it with
the bracelet
CALORIE INTERFACE
On your left you can see the calorie consumption (energy) Interface. It mainly shows the total calories consumed during the day. This content can also be seen in the App of your mobile after linking it to the bracelet
DISTANCE INTERFACE
On your left you can see the distance interface. It mainly shows the total distance traveled during the day. This content can also be seen In the App of your mobile after linking it with the bracelet.
SLEEP INTERFACE
On your left you can see the sleep Interface, which shows the total sleep time of the previous night, and can also be seen in the App once linked with the bracelet. Sleep mode does not need additional adjustments. The device can detect the sleep moment and switch to sleep mode automatically starting at 8pm. After getting up, It automatically shows the total sleep time.
MEASUREMENT OF HEART RATE AND OXYGEN IN BLOOD
On your left you will see the Interfaces of Heart Rate and Blood Oxygen, which
can also be checked in the app once linked with the bracelet.
When the test starts, the bracelet will show the heartbeat in real time and
stop the test after 40 seconds, with a vibration that Indicates It. The screen
will turn off 3 seconds later.
The method for measuring oxygen In blood is the same.
BLOOD PRESSURE INTERFACE
On your left you can see the blood pressure measurement interface, you can
also see this content in the App of your mobile once it is linked to the
bracelet.
The measurement method is the same as for the heart rate and blood oxygen.
Note: please remain immobile while the measurement is being made. Do not
press the button to change the interface. In case of doing so, the bracelet
would interrupt the measurement.
PUSH NOTIFICATIONS
When the wristband is connected to the phone, you can receive calls, text
messages, WeChat or other applications.
Important: the wristband needs to be connected to the phone, and in the
app, you have to activate the corresponding switch in .letting -> Notification
configuration.
FIND PHONE
On the left you will see the interface of finding phone. When you are in it,
press the button on the wristband so that the mobile phone emits the ringing
sound, through which you can locate it
Note: Make sure that Bluetooth connected and functioning normally to be
able to use the function.
SHUTDOWN INTERFACE
-
Press the button until the On/ Off selection box appears, touch the button to select Off, and keep it pressed for 5 seconds to turn off the wristband. The interface will read “Goodbye” and the device will vibrate before shutting down.
-
The Interface shows HTS92-xxx and the Bluetooth Icon, this Is the Bluetooth ID number of the device, when you are linking to the phone, the user can select this device and connect.
Note: in the On/ Off interface, if no operation is performed, the device will return to the main interface after 5 second
OTHER FUNCTIONS
This product continues to increase its functions and algorithms, for online
support to update software and firmware, support for OTA update of software
and firmware, unknown functions or other problems, go to the App, go to
Settings-> FAQ and search the right help (In this interface there are answers
to your questions and the corresponding video).
Steps for the update by air (OTAJ:
Settings-> Check the update-> The latest version upgrade {software update)->
Latest firmware-> Upgrade immediately (firmware OTA update).
ATTENTION
- Do not puncture or grate the device.
- Do not expose it to solvents such as gasoline.
- Do not expose it to large electric or magnetic fields.
- Do not leave the device exposed to sources of heat or in high temperature environments. such as a car parked In the sun.
- Do not puncture, grate or burn the device’s battery.
- Replaceable coin batteries contain chi orates. They must be handled with special care.
- You can not bathe with the device (the temperature should be less than 35 degrees).
DECLARATION
-
The reproduction, transfer, distribution or storage of part or all of this document, in any form and without the permission of the company, are prohibited.
-
This manual is correct and complete, but we can not guarantee that there is no error or omission. The company ls not responsible for errors or omissions in the manual.
-
Our company works under a policy of constant
development. We reserve the right to make changes and improvements in any of the products described In this document. without prior notice. -
The company Is not liable under any circumstances (within the applicable laws) for loss of data, or for damages caused incidentally, indirectly or as a consequence of misuse.
FAQ
-
Can not find the device during the Bluetooth connection?
a. Please make sure that the distance between both devices is less than 0.5m.
b. Please make sure that the device is not under battery. If the problem persists after 1.5 hours of loading, please contact us. -
Can not connect the device with the app?
The Bluetooth services of some smartphones behave abnormally after a restart. Please, restart the Smartphone to link the devices. -
Why are Android phones disconnected sometimes?
The memory manager system of Android phones will have forced the application to close while working in the background; you need to turn off the Energy Saver mode, or Include the App In the system of applications accepted in the background, and thus the App will not be closed by force. The App must work in the background, the Bluetooth will not be disconnected.
Do not call announcements or messages arrive?
Please check the solutions in the app, in Setting -> FAQ to solve this problem.
ABOUT OXYGEN IN BLOOD
Oxygen saturation Is the percentage of oxygen fixed, or capacity of oxyhemoglobin (Hb02) versus the combined capacity of total hemoglobin (Hb).
ABOUT THE HEART RATE
- Most people have a heart rate between 60-120.
- Most people have a resting heart rate of 60-90 beats per minute, the optimal ratio is 70 beats per minute.
- The heart rate of athlete, and people who train is 40 to 60 beats per minute.
- The heart rate changes constantly, for example after exercise, after eating, due to personal circumstances or simple mood.
- When doing aerobic exercise in effective and safe conditions, the heart rate of people is usually 170 minus age. Everyone should keep the rhythm between 108 and 144.
ABOUT BLOOD PRESSURE
- Systolic pressure Is the maximum value of arterial blood circulation and is also known as “High Pressure”; The lowest blood circulation value Is called “Low Pressure” or diastolic blood pressure.
- Most people have a pressure of between 80 (low pressure) and 120 (high pressure) approximately.
- Within the same parameters, the pressure may vary according to age or sex. Generally, older people have a higher pressure than young people. just as men have higher than women.
- Blood pressure may change depending on the exercise performed, after eating, due to personal circumstances, or the simple state of mind.
NOTICE
Please, always follow medical Indications; Taking these measurements as a
self-diagnosis or basis for treatment is very dangerous. Those users with
circulatory disorders or stress problems, please take treatments only under
the supervision of a doctor. The data provided by this bracelet are for
references only, and may not be used for any medical purpose.
TECHNICAL SERVICE :http://imperiielectronics.com/index.php?controller=contact
imperii TT FIEPRO SmartBand Rainbow Instruction Manual – Download
[optimized]
imperii TT FIEPRO SmartBand Rainbow Instruction Manual –
Download
imperii TT FIEPRO SmartBand Rainbow Instruction Manual – OCR
PDF
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>