BROW CODE Professional Brow Tint Kit Instructions

: June 12, 2024
: BROW CODE

Table of Contents

BEFORE BROW TINTING
PREPARATION OF TINT
TINTING BROWS
REMOVE TINT
TINTING EYELASHES
AFTERCARE:
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BROW CODE logho INSTRUCTIONS ON USE OF BROW CODE
PRO TINT KIT
CONSULT & TEST PATCH FIRST

BEFORE BROW TINTING

Remove all eye makeup before tinting the eyebrows using an oil fee cleanser.
In order to achieve the optimum tinting results, the eyebrows should be dry and free of all oils and sebum as this can create a barrier against all Brow Code Tints and it will not adhere to the surface layer of the skin or the hair.

PREPARATION OF TINT

Mix equal parts of Brow Tint and Cream or Liquid Oxidant into a creamy paste using the en-closed application stick. The mixing ratio is 1:1 (Generally 4 drops of Cream or Liquid Oxidant is enough to make an even paste).

TINTING BROWS

When the client has closed their eyes, apply the tint to the eyebrows using the application stick until they are completely covered in tint.
Ensure the tint is directly placed in the shape you are wanting to achieve as it can slightly stain the skin.
Application times vary 5-12 minutes depending on the desired intensity and results. The lon-ger you leave it, the darker it will become.

REMOVE TINT

At the end of application time, remove excess tint with a dry cotton ball. Then proceed to re-move excess tint in the areas that you want lighter by gently using the Miceliar Water making sure no pigment is left outside of the brow. You can gently remove excess over the brow with the Micellar Water.
If the tint stains the skin in areas you want to remove, use the Brow Code Tint Remover quickly and gently. You must not use the Tint Remover directly on the eyelashes, eyebrows or on the skin around the eyes as this can cause serious irritation.

TINTING EYELASHES

Imoortant Note: the shades Black or Blue Black for tinting eyelashes.
STEP ONE
Renove any contact lenses.
STEP TWO
Put some skin protection cream on the client’s lower lid and underside of the eye protection papers.
STEP THREE
Press one of the eyelash protection papers right up under the eyelashes of each eye to ensure that no tint touches the skin.
STEP FOUR
Please use an application stick to apply the tint until the lashes are covered.
STEP FIVE
Application times vary 5-12 minutes depending on the desired intensity and results.
STEP SIX
After the application time, remove the eyelash protection papers carefully and remove the excess tint using a dry cotton ball.
STEP SEVEN
Finally remove any remaining tint with Micellar Water and cotton wool. The client’s eyes should remain closed until cleansing has been completed.

AFTERCARE:

Avoid using makeup and facial cleansers around the brow area for the following 24 hours.
Avoid prolonged exposure to direct sunlight, the use of sunbeds, saunas, steam rooms and swimming pools for 24 hours.
Avoid exfoliating and using anti-ageing products around the brow area for at least two to three days prior to and post treatment.
Avoid using any self-tanning products on the face for around two to three days either side of the treatment.
Avoid the temptation to over touch the brow area after a treatment. Touch with fingers can lead to oils entering open pores and clogging them.