Wahoo WFBKTR9B1 Gps Bike Computer User Guide
- June 12, 2024
- wahoo
Table of Contents
KICKR ROLLR
gps bike computer
QUICK START GUIDE
WFBKTR9B1 Gps Bike Computer
SCAN THE QR CODE FOR IN APP SET UP INSTRUCTIONS
wahoofitness.com/set-up-kickr
BOX CONTENTS
A. REAR TIRE BODY|
---|---
B. FRONT TIRE GRIPPER BODY|
C. AC POWER ADAPTER|
TOOLS REQUIRED
2 Phillips Screwdriver
INSTALLATION
-
UNFOLD
Raise up the folding arm of front body -
REMOVE SCREWS
a. Locate Phillips head screws on the front body directly underneath the wheelbase adjustment lever
b. Use a Phillips head screwdriver to remove the screws -
CONNECT FRONT AND REAR BODY
a. Lift wheel base adjustment lever on front body
b. Insert rear tire body into front body, ensuring the rear body is inserted past the screw holes beneath the adjustment lever
c. Close lever back into place -
SECURE FRONT AND REAR BODY
Reinsert Phillips head screws from Step 2 into the screw holes on both sides of the front body beneath the adjustment lever and tighten with a Phillips head screwdriver.
-
INSTALL BIKE
a. Place front bike wheel onto front body wheel block so that the front tire sits firmly on the wheel block
b. Rest rear bike wheel onto the rollers of the rear body
-
WHEELBASE
a. Lift adjustment lever
b. Slide rear body until the rear tire contacts evenly on the two rollers
c. Close lever back into place -
TIRE GRIPPER
Rotate adjustment knob to tighten gripper and capture bike wheel -
USE THE INCLUDED AC POWER ADAPTER TO CONNECT THE KICKR ROLLR TO A STANDARD WALL OUTLET
APP PAIRING
http://www.wahoofitness.com/set-up-kickr
- DOWNLOAD THE WAHOO APP BY SCANNING THE QR CODE
- LAUNCH THE WAHOO APP
- NAVIGATE TO SETTINGS
- CLICK ON THE SETTINGS TAB
- CLICK ON SENSORS/DEVICES
- CLICK ON ADD NEW SENSOR
- FOLLOW THE APP INSTRUCTIONS