FLASHLOGIC FLRSCH7 Chrysler Dodge Jeep Plug N Play Harness Installation Guide

: June 12, 2024
: FLASHLOGIC

Table of Contents

FLRSCH7 Chrysler Dodge Jeep Plug N Play Harness
Product Information:
Product Usage Instructions:
Vehicle List:
Features:
Box Contents:
Compatible Accessories:
Type 1 – Wire Chart:
Type 1 – Wiring Diagram (ADS-THR-CH7):

FLRSCH7 Chrysler Dodge Jeep Plug N Play Harness

Product Information:

Product Name: DIR-CH(RS)-CH8-[FLRSCH7]

Firmware Version: DIR-CH(RS)-CH8-[FLRSCH7]

Hardware Version: FLRSCH7

Accessories:

Required: FLPROG
Optional: DIRECTED XL-202 RF-KIT & ADS-HRN(RS)-XL02
Optional: DIRECTED SMARTSTART & ADS-HRN(RS)-SM01

Product Usage Instructions:

Before installation, connect the module to a computer.
Login to the Weblink account.
Flash the firmware to the module (note that the module is not
preloaded with firmware).
Use the accessories accordingly. Please note that accessories
are sold separately.

Note: All vehicle doors must be closed and locked prior to the
remote start sequence.

Vehicle List:

– Dodge RAM

Features:

Install Type: Data Immobilizer Bypass
3X Lock Start/Standalone Mod.
Door Lock
Door Unlock
Arm OEM Alarm
Disarm OEM Alarm
Trunk/Hatch Release
Door Status Output
Trunk Status Output
Brake Pedal Status Output
Tachometer Output
Secure Takeover
Glow Plugs Status
RAP Shutdown Control

Box Contents:

Module
T-Harness 1
VS2
MS2
LED 2
Programming Blue
LED 1
Button
Black (4)
VS1
RF Port/MS1
Weblink Port
Black (10)
White (6)
WebLink Cable (required accessory sold separately)
Hood Switch and Cable Warning Sticker (Aftermarket)
RF Kit (accessories sold separately) ADS-HRN(RS)-XL02
Telematic Kit (accessories sold separately)
ADS-HRN(RS)-SM01

Compatible Accessories:

DIRECTED XL202 RF KIT
- XL202 RF Decoder
- XL202 Antenna
DIRECTED SMARTSTART

Type 1 – Wire Chart:

– Component Locator: Dart STD key (Tip-Start) AT, Parking Light,
Driver Door Pin

Type 1 – Wiring Diagram (ADS-THR-CH7):

– Module Locations: M1, M2, M3, M4

INSTALL GUIDE DIR-CH(RS)-CH8-[FLRSCH7]-EN
DOCUMENT NUMBER 77833
REVISION DATE 20211115
FIRMWARE DIR-CH(RS)-CH8-[FLRSCH7] HARDWARE FLRSCH7
ACCESSORIES FLPROG (REQUIRED) DIRECTED XL-202 RF-KIT & ADS-HRN(RS)-XL02 (OPTIONAL) DIRECTED SMARTSTART & ADS-HRN(RS)-SM01 (OPTIONAL)
TERMS OF USE: Automotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users.
Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2021

BEFORE INSTALLATION
1- Connect module to computer 2- Login to Weblink account 3- Flash firmware to module (module is not preloaded with firmware) 4- Use accessories accordingly (accessories are sold separately)
www.flashlogic.com

NOTE I WARNING: All vehicle doors must be
closed and locked prior to remote start sequence.
Dart STD key (Tip-Start) AT 1500 / 2500 / 3500 STD key (Tip-Start) AT 1500 / 2500 / 3500 STD key (Tip-Start) AT 1500 Classic STD key (Tip-Start) AT 1500 / 2500 / 3500 Diesel STD key (Tip-Start) AT 1500 / 2500 / 3500 Diesel STD key (Tip-Start) AT 1500 Classic Diesel STD key (Tip-Start) AT

VEHICLE LIST – 1 OF 1

PAGE 2 OF 22 DOC.: #77833· 20211115
FEATURES

YEAR INSTALL TYPE DATA IMMOBILIZER BYPASS 3X LOCK START/STANDALONE MOD. DOOR LOCK DOOR UNLOCK ARM OEM ALARM DISARM OEM ALARM TRUNK/HATCH RELEASE DOOR STATUS OUTPUT TRUNK STATUS OUTPUT BRAKE PEDAL STATUS OUTPUT TACHOMETER OUTPUT SECURE TAKEOVER GLOW PLUGS STATUS RAP SHUTDOWN CTRL

13-16 1 ·

··········

·

13-17 2 · · · · · ·

·

···

·

18 3 · · · · · ·

·

···

·

19-21 3 · · · · · ·

·

···

·

14-17 2 · · · · · ·

·

·····

18 3 · · · · · ·

·

·····

19-21 3 · · · · · ·

·

·····

DODGE MAKE MODEL

RAM

DIR-CH(RS)-CH8-[FLRSCH7]-EN

www.flashlogic.com

BOX CONTENTS – 1 OF 1

BOX CONTENTS MODULE

T-HARNESS 1

VS2

MS2

LED 2

PROGRAMMING

BLUE

21 43

LED 1

BUTTON

65
21 43

4 BLACK

VS1

3 RF PORT/

MS1

2 WEBLINK PORT

1

65

A

87

BLACK 10 9 12 11

14 13

16 15

B

18 17

20 19

G

4 BLUE

3 TELEMATIC

2

F

1 PORT

3

E

2 BLACK

1

21

C

43

BLACK

65 87

10 9

12 11

D

9 10

78

5 6 WHITE

34

12

10 PIN CONNECTOR

PAGE 3 OF 22 DOC.: #77833· 20211115

12 PIN CONNECTOR

AFTERMARKET HOOD SWITCH AND CABLE WARNING STICKER

WEBLINK CABLE (required accessory sold separately)

WEBLINK CABLE

MODULE WEBLINK PORT

4 PIN BLACK CABLE

DIR-CH(RS)-CH8-[FLRSCH7]-EN

COMPUTER USB PORT

www.flashlogic.com

RF KIT (accessories sold separately) ADS-HRN(RS)-XL02
MODULE RF PORT
TELEMATIC KIT (accessories sold separately) ADS-HRN(RS)-SM01
MODULE TELEMATIC PORT

COMPATIBLE ACCESSORIES – 1 OF 1
DIRECTED XL202 RF KIT

XL202 RF DECODER

XL202 ANTENNA

(NC)
(NC) (NC)

DIRECTED SMARTSTART

PAGE 4 OF 22 DOC.: #77833· 20211115

DIR-CH(RS)-CH8-[FLRSCH7]-EN

www.flashlogic.com

MAKE MODEL

TYPE 1 – WIRE CHART – 1 OF 1

PAGE 5 OF 22 DOC.: #77833· 20211115

COMPONENT LOCATOR

YEAR WIRE DESCRIPTION CONNECTOR NAME CONNECTOR COLOR CONNECTOR TYPE POSITION WIRE COLOR POLARITY MODULE LOCATION

CanH

~

Black 16 pin

06 Gray/White

(DATA) OBDII connector

~

Dart

CanL

~

Black 16 pin

14 Yellow

(DATA) OBDII connector

~

STD key

13-16

AT

Parking Light

~

Black 06 pin

03 White/Brown

(MUX) Parking light switch

A

Driver door pin

~

~ Purple

(-)

Harness in driver kick panel

~

DODGE

DIR-CH(RS)-CH8-[FLRSCH7]-EN

www.flashlogic.com

M1

M7 RF PORT/WEBLINK PORT

M2

M6 TELEMATIC PORT

M5

M3

M4

M1 01

02

MS2

03

04

05

06

M2 01

02

03

04

05

06

MS1

07

08

09

10

11

12

13

14

15

16

17

18

19

20

M3 01 02 GRAY – RAP SHUTDOWN (-) OUTPUT 03 04 05 06 07 08 09 10 11 GRAY/GREEN – HORN (-) OUTPUT 12

M4 01 02 03 04 GRAY/WHITE – HOOD STATUS (-) INPUT 05 06 07 08 09 10

BROWN/RED BROWN/YELLOW
WHITE/BLACK (NC) WHITE/BROWN WHITE/RED (NC) WHITE (NC)

TYPE 1 – WIRING DIAGRAM – 1 OF 1 (ADS-THR-CH7)
VS2
VS1

1: IGNITION CONNECTOR 1: IGNITION HARNESS

PAGE 6 OF 22 DOC.: #77833· 20211115
IGNITION SWITCH

CANH – 06 CANL – 14
PARKING LIGHT (MUX) – 03

OBDII CONNECTOR 12345678

9 10 11 12 13 14 15 16

BLACK 654321

PARKING LIGHT SWITCH

DRIVER KICK PANEL

DRIVER DOOR PIN (-)

HARNESS

HORN (-) 1 OPTIONAL 1

HOOD SWITCH 2 INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE. 2
DIR-CH(RS)-CH8-[FLRSCH7]-EN

www.flashlogic.com

MAKE MODEL

TYPE 2 – WIRE CHART – 1 OF 1

PAGE 7 OF 22 DOC.: #77833· 20211115

COMPONENT LOCATOR

YEAR WIRE DESCRIPTION CONNECTOR NAME CONNECTOR COLOR CONNECTOR TYPE POSITION WIRE COLOR POLARITY MODULE LOCATION

1500 /

CanH

D7405A Black 16 pin

06 Gray/White

(DATA) OBDII connector

~

1500 Diesel STD key

CanL 13-17
Parking Light

D7405A D2242A

Black Black

16 pin 10 pin

14 Yellow 01 White/Brown

(DATA) OBDII connector (MUX) Parking light switch

~ A

AT

Driver door pin

~

~ Purple

(-)

Harness in driver kick panel

~

2500 /

CanH

D7405A Black 16 pin

06 Gray/White

(DATA) OBDII connector

~

2500 Diesel / 3500 /

CanL 13-17
Parking Light

D7405A D2242A

Black Black

16 pin 10 pin

14 Yellow 01 White/Brown

(DATA) OBDII connector (MUX) Parking light switch

~ A

3500 Diesel

Driver door pin

~

~ Purple

(-)

Harness in driver kick panel

~

RAM

DIR-CH(RS)-CH8-[FLRSCH7]-EN

www.flashlogic.com

M1

M7 RF PORT/WEBLINK PORT

M2

M6 TELEMATIC PORT

M5

M3

M4

M1 01

02

MS2

03

04

05

06

M2 01

02

03

04

05

06

07

08

09

MS1

10

11

12

13

14

15

16

17

18

19

20

M3 01 02 GRAY – RAP SHUTDOWN (-) OUTPUT 03 04 05 06 07 08 09 10 11 GRAY/GREEN – HORN (-) OUTPUT 12

M4 01 02 03 04 GRAY/WHITE – HOOD STATUS (-) INPUT 05 06 07 08 09 10

BROWN/RED BROWN/YELLOW
WHITE/BLACK (NC) WHITE/BROWN WHITE/RED (NC) WHITE (NC)

TYPE 2 – WIRING DIAGRAM – 1 OF 1 (ADS-THR-CH7)
VS2
VS1

1: IGNITION CONNECTOR 1: IGNITION HARNESS

PAGE 8 OF 22 DOC.: #77833· 20211115
IGNITION SWITCH

CANH – 06 CANL – 14

OBDII CONNECTOR 12345678

9 10 11 12 13 14 15 16

BLACK

PARKING LIGHT SWITCH

PARKING LIGHT (MUX) – 01

12345 6 7 8 9 10

DRIVER KICK PANEL

DRIVER DOOR PIN (-)

HARNESS

HORN (-) 1 OPTIONAL 1

HOOD SWITCH 2 INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE. 2
DIR-CH(RS)-CH8-[FLRSCH7]-EN

www.flashlogic.com

MAKE MODEL

TYPE 3 – WIRE CHART – 1 OF 1

PAGE 9 OF 22 DOC.: #77833· 20211115

COMPONENT LOCATOR

YEAR WIRE DESCRIPTION CONNECTOR NAME CONNECTOR COLOR CONNECTOR TYPE POSITION WIRE COLOR POLARITY MODULE LOCATION

CanH

~

Gray 10 pin

02 Orange

(DATA) Trailer module, right of steering column

~

1500 / 2500 / 3500 STD key AT

18 CanL

~

Gray 10 pin

01 Yellow

(DATA) Trailer module, right of steering column

~

Driver door pin

~

~ Purple

(-)

Harness in driver kick panel

~

CanH

~

Gray 10 pin

02 Orange

(DATA) Trailer module, right of steering column

~

1500 Classic STD key AT

19-21 CanL

~

Gray 10 pin

01 Yellow

(DATA) Trailer module, right of steering column

~

Driver door pin

~

~ Purple

(-)

Harness in driver kick panel

~

CanH

~

Gray 10 pin

02 Orange

(DATA) Trailer module, right of steering column

~

1500 Diesel / 2500 Diesel / 3500 Diesel STD key AT

18

CanL

~

Gray 10 pin

01 Yellow

(DATA) Trailer module, right of steering column

~

Driver door pin

~

~ Purple

(-)

Harness in driver kick panel

~

CanH

~

Gray 10 pin

02 Orange

(DATA) Trailer module, right of steering column

~

1500 Classic Diesel STD key AT

19-21 CanL

~

Gray 10 pin

01 Yellow

(DATA) Trailer module, right of steering column

~

Driver door pin

~

~ Purple

(-)

Harness in driver kick panel

~

RAM

DIR-CH(RS)-CH8-[FLRSCH7]-EN

www.flashlogic.com

M1

M7 RF PORT/WEBLINK PORT

M2

M6 TELEMATIC PORT

M5

M3

M4

M1 01

02

MS2

03

04

05

06

M2 01

02

03

04

05

06

07

08

09

MS1

10

11

12

13

14

15

16

17

18

19

20

M3 01 02 GRAY – RAP SHUTDOWN (-) OUTPUT 03 04 05 06 07 08 09 10 11 GRAY/GREEN – HORN (-) OUTPUT 12

M4 01 02 03 04 GRAY/WHITE – HOOD STATUS (-) INPUT 05 06 07 08 09 10

BROWN/RED BROWN/YELLOW
WHITE/BLACK (NC) WHITE/BROWN WHITE/RED (NC) WHITE (NC)

TYPE 3 – WIRING DIAGRAM – 1 OF 1 (ADS-THR-CH7)
VS2
VS1

1: IGNITION CONNECTOR 1: IGNITION HARNESS

CANH – 02 CANL – 01

GRAY
12345 6 7 8 9 10

BLACK

PARKING LIGHT (MUX) – 01

12345 6 7 8 9 10

DRIVER DOOR PIN (-)

PAGE 10 OF 22 DOC.: #77833· 20211115
IGNITION SWITCH
TRAILER PACK CONNECTOR
PARKING LIGHT SWITCH
DRIVER KICK PANEL HARNESS

HORN (-) 1 OPTIONAL 1

HOOD SWITCH 2 INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE. 2
DIR-CH(RS)-CH8-[FLRSCH7]-EN

www.flashlogic.com

MODULE PROGRAMMING PROCEDURE – 1 OF 2

PAGE 11 OF 22 DOC.: #77833· 20211115

01

go ! ooF “#o$% ! oo eo wake

07

Remove key.

up data bus.

¥¦¦ ON

£¤¤

START

13

Connect module to computer and proceed

with extended programming.

02

Press Unlock on OEM remote. If the vehicle is

08

Insert key into ignition.

not equipped with an OEM remote, press the

module programming button.

§¨¨

START

14

WARNING: Do not press module programming

button. Connect power first. Connect module

to vehicle.

03

Wait, LED will flash GREEN once [1x]. If LED

09

Turn key to ON position.

does not flash GREEN, press Unlock on OEM

ACC ON

remote again.

OFF

START

15

Turn key to ON position.

ACC ON

OFF

START

04

Turn key to ON position.

ACC ON

OFF

START

10

Wait, LED will flash GREEN.

16

Wait, LED will turn solid GREEN for 2 seconds.

05

Wait, LED will turn solid RED.

11

Turn key to OFF position.

ACC ON

y

¡e¢¡

17

Turn key to OFF position.

ACC ON

y

¡e¢¡

06

Turn key to OFF position.

ACC ON

y

¡e¢¡

12

WARNING: Disconnect power last. Disconnect

18

Turn key to START position.

module from vehicle.

ON

START

DIR-CH(RS)-CH8-[FLRSCH7]-EN

www.flashlogic.com

19

u&’ (ey )0 122 3045)50’6

ACC ON

OFF

START

20

Modul7 8&ogr995’@ 8&ocedur7 Aompleted.

MODULE PROGRAMMING PROCEDURE – 2 OF 2

PAGE 12 OF 22 DOC.: #77833· 20211115

DIR-CH(RS)-CH8-[FLRSCH7]-EN

www.flashlogic.com

VALET MODE PROGRAMMING PROCEDURE – 1 OF 1

xBCDE GH IalPQ RSTPU QVP WPXSQP YtartP` aY HSQ

To exit valet mode: repeat steps 1 to 5.

fbHcQaSHdfh iPylesY PHQ`sU pScq dHT rHfock will

remain functional. See RF kit user manual for

alternate valet mode programming.

01

Time restriction. Complete next step within 7

seconds.

02

Cycle ignition ON five times [5x OFF/ON]

OFF ACC ON START rapidly.

ENGINE START STOP

03

Wait, LED 1 will turn solid RED for 2 seconds.

04

Set ignition to OFF position.

OFF ACC ON START

ENGINE START STOP

05

Valet Mode Programming Procedure

completed.

DIR-CH(RS)-CH8-[FLRSCH7]-EN

PAGE 13 OF 22 DOC.: #77833· 20211115
www.flashlogic.com

AFTERMARKET REMOTE PROGRAMMING: NOTES
I All aftermarket remotes must be programmed to the RF-Kit. Refer to the RF- Kit user guide for aftermarket remote features and programming procedures.

AFTERMARKET REMOTE PROGRAMMING – 1 OF 1

PAGE 14 OF 22 DOC.: #77833· 20211115

DIR-CH(RS)-CH8-[FLRSCH7]-EN

www.flashlogic.com

MODULE NAVIGATION PROCEDURE – 1 OF 1

PAGE 15 OF 22 DOC.: #77833· 20211115

st uv wt t xut t utu

04

TO ACCESS THE OPTIONS: Press and hold

10

To save and return to the OPTIONS: Press and

t t tuv ocedur dailur t xut t

programming button until LED 1 turns solid

hold programming button until LED 1 turns

e Navigation will drain vehicle battery.

RED.

solid RED.

To exit the Module Navigation at any time:

Follow STEP 13.

Module must be programmed to the vehicle.

05

IN THE OPTIONS: Press the programming

11

LED 1 will flash RED as many times as the

[Y]

button as many times as the option number

[Y]

current option number continuously.

indicates. LED 1 will flash RED an equal

amount of times continuously.

Use the Module Navigation Chart on the next

06

TO ACCESS THE SETTINGS: Press and hold

12

Configure every other setting and proceed to

page.

programming button until LED 1 turns solid

step 13.

GREEN.

01

Set ignition to OFF position.

OFF ACC ON START

ENGINE START STOP

07

LED 1 will flash GREEN as many times as

13

[Z]

the current (or default) setting number,

continuously.

02

TO ACCESS THE MENUS: Press and hold

08

IN THE SETTINGS: Press the programming

14

programming button until LED 1 turns solid

[Z]

button as many times as necessary to access

GREEN.

your setting. LED 1 will flash GREEN an equal

amount of times continuously.

03

IN THE MENUS: Press the programming

09

[X]

button as many times as the menu number

indicates. LED 1 will flash GREEN an equal

amount of times continuously.

To return to the MENUS: exit the Module

Navigation and redo the Module Navigation

Procedure.

MANDATORY: EXIT MODULE NAVIGATION. Press and hold programming button for 7 seconds. LED 1 will flash RED rapidly. Release programming button. LED 1 will turn OFF.
Module navigation completed.
Failure to exit the Module Navigation will drain vehicle battery.

DIR-CH(RS)-CH8-[FLRSCH7]-EN

www.flashlogic.com

MODULE NAVIGATION CHART – 1 OF 2

PAGE 16 OF 22 DOC.: #77833· 20211115

[X] MENUS [Y] OPTIONS [Z] SETTINGS

MODULE NAVIGATION CHART: NOTES
g Default settings are listed in bold. II Make sure the option is covered on the vehicle before
attempting to change the setting.
01 CONFIGURATION
*Vehicle will shutdown when a door is opened.

01 DISARM/UNLOCK BEFORE START 02 RELOCK AFTER START 03 RELOCK AFTER SHUTDOWN 04 FORCE UNLOCK ALL ON FIRST PRESS 05 TAKEOVER 06 N/A 07 N/A
08 MODULE RUN TIME
09 WAIT TO START DELAY
10 N/A 11 N/A 12 N/A 13 N/A

01 OFF 02 ON 01 OFF 02 ON 01 OFF 02 ON 01 OFF 02 ON 01 ENABLE 02 DISABLE* 01 N/A 01 N/A 01 03 MIN 02 05 MIN 03 10 MIN 04 15 MIN 05 25 MIN 06 30 MIN 07 35 MIN 08 15 MIN
01 02 SEC 02 05 SEC 03 08 SEC 04 10 SEC 05 15 SEC 06 20 SEC 07 25 SEC 08 30 SEC 01 N/A 01 N/A 01 N/A 01 N/A

DIR-CH(RS)-CH8-[FLRSCH7]-EN

www.flashlogic.com

MODULE NAVIGATION CHART: NOTES
*Vehicle will shutdown when a door is opened.

[X] MENUS [Y] OPTIONS [Z] SETTINGS

MODULE NAVIGATION CHART – 2 OF 2

01

hijklmnpqrlij

02-07 Technical Support only

14 tipj vwvjr rplmmvp
15 HORN CHIRPS WIDTH 01 N/A

PAGE 17 OF 22 DOC.: #77833· 20211115
01 DOUBLE LOCK 02 zih{ | njzih{ 03 zih{ | njzih{ | }rqpr 04 DOUBLE LOCK + START 01 30 mSEC 02 15 mSec 03 60 mSec 01 N/A

DIR-CH(RS)-CH8-[FLRSCH7]-EN

www.flashlogic.com

REMOTE STARTER ERROR CODES – 1 OF 1

[X] NUMBER OF PARKING LIGHT FLASHES DIAGNOSTIC

REMOTE STARTER ERROR CODES: NOTES

I WARNING: The following applies only when the parking

03

lights are connected and supported by the system.

04

II After a remote starter failure, the parking lights will flash 05

[X] number times to indicate an error code. See table.

06

07

08

09

10

11

12

13

14

15

16

F~~ ak
~~ ~
ost. t al ~ Vehicl ~ Glow plug timeout error. RS not synchronized. Start vehicle with OEM key for 15 sec before trying a new RS sequence. N/A N/A N/A N/A N/A N/A CAN communication failure during RS sequence.

PAGE 18 OF 22 DOC.: #77833· 20211115

DIR-CH(RS)-CH8-[FLRSCH7]-EN

www.flashlogic.com

TEST MODULE I DURING PROGRAMMING II DURING REMOTE START III WITH IGNITION OFF

MODULE DIAGNOSTICS – 1 OF 1

LED 1 STATUS DIAGNOSTIC

Flashing RED Solid RED Flashing GREEN Solid GREEN then OFF OFF Flashing RED Solid RED Flashing GREEN Solid GREEN then OFF OFF Flashing RED Solid RED Flashing GREEN Solid GREEN then OFF OFF

Missing/wrong information from firmware or vehicle. Module waiting for more vehicle information. Additional steps required to complete module programming. Module correctly programmed. No activity or module already programmed. Module incorrectly programmed. Module incorrectly programmed. Module correctly programmed and operational. Reset in progress. Invalid ground when running status from remote starter. Module incorrectly programmed or connected. Module not programmed. Waiting for more vehicle information. False ground when running status from remote starter. Reset in progress. Module at rest and ready for a remote start sequence.

PAGE 19 OF 22 DOC.: #77833· 20211115

DIR-CH(RS)-CH8-[FLRSCH7]-EN

www.flashlogic.com

MODULE RESET PROCEDURE – 1 OF 1

01

Disconnect all connectors from module except

07

Reconnect all connectors.

the BLACK 20-PIN connector.

02

Disconnect the BLACK 20-PIN connector.

08

Repeat programming procedure.

03

PRESS AND HOLD the module’s programming

Failure to follow procedure may result with a

button while connecting the BLACK 20-PIN

DTC or a CHECK ENGINE error message.

connector.

04

Wait, LED 1 will flash RED. RELEASE

programming button.

05

LED 1 will turn RED for 2 seconds.

06

Module RESET completed.

DIR-CH(RS)-CH8-[FLRSCH7]-EN

PAGE 20 OF 22 DOC.: #77833· 20211115
www.flashlogic.com

TAKEOVER PROCEDURE – 1 OF 1

All vehicle doors must be closed and locked

06

Press and release BRAKE pedal.

prior to remote start sequence.

01

Time restriction. Complete steps 2 to 6 within

07

Take over procedure completed.

45 seconds.

02

Press unlock on OEM or aftermarket remote.

Failure to follow procedure will result in

vehicle engine shutdown.

03

Open driver door and enter vehicle.

04

Close driver door.

05

Turn key to ON position.

ACC ON

OFF

START

DIR-CH(RS)-CH8-[FLRSCH7]-EN

PAGE 21 OF 22 DOC.: #77833· 20211115
www.flashlogic.com

INSTALLATION CHECKLIST – 1 OF 1

PAGE 22 OF 22 DOC.: #77833· 20211115

CHECKLIST

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area. 2 Close all vehicle doors, hood and trunk. 3 ess the LOCK button once [1x] on the aftermarket keyfob.
Question 1: Do the doors lock? ¨ YES: Go to next step.
NO: Verify the remote programming, the RF connections and the wired door lock/unlock ¨ connections as illustrated in the wiring diagram, if applicable. Repeat the test and call
technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle. Question 7: Does the vehicle shut down?
¨ YES: Go to next step.

¨

NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.
Question 2: Do the doors unlock? ¨ YES: Go to next step.
NO: Verify the remote programming, the RF connections and the wired door lock/unlock ¨ connections as illustrated in the wiring diagram, if applicable. Repeat the test and call
technical support, if the problem persists.

¨ YES: Go to next step.

¨

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12

If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported. Question 3: Does the trunk or hatch open/unlock?
¨ YES: Close trunk or hatch and go to next step.

NO: Verify the remote programming, the RF connections and the wired trunk/hatch ¨ connections as illustrated in the wiring diagram, if applicable. Repeat the test and call
technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

Question 4: Does the driver side sliding door open? ¨ YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

¨

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported. Question 5: Does the passenger side sliding door open?
¨ YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

¨

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle. Question 6: Does the vehicle remote start?
¨ YES: Go to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle. Question 9: Does the vehicle remote start?
YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood ¨ switch, then repeat the test. ¨ NO: Go to next step. 14 Close hood. 15 Enter vehicle and close the doors. 16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle. 17 Wait for the vehicle to start. 18 Press brake pedal.
Question 10: Does the vehicle shut down? ¨ YES: Go to next step.
NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once ¨ [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the
wiring diagram, if applicable, and call technical support.
19 Exit vehicle. 20 Installation checklist completed.

¨

NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

DIR-CH(RS)-CH8-[FLRSCH7]-EN

www.flashlogic.com