MACKLORE GP06 Galaxy Projector User Manual
- June 12, 2024
- MACKLORE
Table of Contents
MACKLORE GP06 Galaxy Projector
Open Box to Check:
Please follow the manual to avoid “damage” or “not working” due to improper
operation. Please check whether the product is broken when you receive the
product.
Attention:
Please power off the light projector after 2-3 hours to cool down for several
minutes then start using it again to get a longer life time.
Warranty and Support
WARRANTY
Please send your Amazon Order # to support@macklore.com to Register 2 Years Warranty & Get 10% OFF Code for next order.
WHAT IS COVERED BY THIS WARRANTY?
For help warranties the product hardware problem and accessories contained in the original packaging against manufacturing defects for 2 Years from the date you bought your product.
WHAT IS NOT COVERED BY THIS WARRANTY?
This Warranty does not apply to damage caused by accident, abuse, misuse,
fire, liquid contact, earthquake or any other external cause.
Especially the cracked/broken screen that is damaged by the external force is
NOT included in the warranty.
or scan me
Product List
-
Galaxy Projector *1
-
Remote Control *1
-
Type-C Cable *1
-
Manual *1
Button Description
-
Infrared lamp
Inductive remote control operation -
Pause / Play / Power on / off
Short press to pause / Play / Long press to power on / off -
Bluetooth mould / White noise mould / Shut off
Short press to bluetooth mould /White noise mould / shut off -
Volume- / Previous
Short press to Vol- /Long press to previous -
Volume+ / Next
Short press to Vol+ /Long press to next -
Light switch led mould
Short press to the lights turn on / off Long press to change the led mould -
Intensity control / Light speed control
Short press to intensity control /Long press to change the light speed -
Type-C charging port
Type-C 5V / 2A
Remote Control Description
Power ON/OFF
Light switch
Volume +
Previous
Next
Volume –
Led mould
Light speed +
Reduce brightness
1H timed shutdown
Cancel timing function
Bluetooth mould /White noise mould / Shut off
Turn red light on/off
Turn green light on/off
Pause
Turn blue light on/off
Turn white light on/off
Brightness Increase
Rock & Roll
Light speed –
2H timed shutdown
Use steps
Remote control
When the device is turned on, aim the remote control at the infrared indicator light to use
Statement:
- With the new technology “star lights blinking” (The green stars will not stay still all the time, it will flicker for a while and then disappear for a while， without any regularity), which is designed to reduce or even eliminate the impact of laser to eyes.
- It has a 4-hour automatic shutdown function (except the timer function), and it will automatically shut down after 4 hours of continuous operation.
Connect bluetooth to play music
Turn on the projector, then find the bluetooth “GP06″ to pair. There will be a sound ” bluetooth connection” when the pairing completed. Just use the mobile phone music player to play music.
Parameters
| LED light source: | Less than 5W |
|---|---|
| Power consumption: | 6-10W |
| Power input: | Type-C 5V / 2A |
| Working temperature: | 59°F – 95°F (15°C – 35°C) |
| Projection area: | 260ft² – 900ft² |
Tips:
This projector has a memory function. When the projector lamp is turned off
but without powering off, then you turn on the lamp again, the lamp will
default to the last setting before you turn off the lamp.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>