perle IDS-108GE Industrial Gigabit Ethernet Switches User Manual

: June 12, 2024
: perle

Table of Contents

IDS-108GE Industrial Gigabit Ethernet Switches
Hardware & Technical Specifications:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

8-Port Industrial Gigabit Ethernet Switches
IDS-108GE
User Manual

IDS-108GE Industrial Gigabit Ethernet Switches

perle.com/products/switches/ids-108ge-8-port-unmanaged-industrial-gigabit- switch.shtml

IDS-108GE Industrial Gigabit Switches

8-port Compact DIN Rail Switches

8 x RJ45 ports with 10/100/1000 Mbps on all ports
Redundant dual power input 12/24/48 VDC
Reverse polarity protection
Fan-less design with no moving parts
-40 to 75C industrial operating temperature support
QoS (Quality of Service) prioritized messages

Perle IDS-108GE Industrial Gigabit Ethernet Switches are designed for easy deployment in industrial environments with harsh operating conditions and limited space. Designed to stand up to extreme temperatures, surges, vibrations, and shocks found in industrial automation, infrastructure, transportation, security, oil and gas, and mining the IDS108GE Switches are economical easy-to-use devices, that provide essential industrial Ethernet networking functionality.
These unmanaged switches support 9 to 55VDC redundant power input and provide a relay alarm for power failure. The full/half-duplex auto-negotiation and auto MDI/MDIX operation simplifies installation and setup for convenient connection of a variety of network devices. And, QoS support allows for traffic prioritization and effective management of resources.
For automation and industrial control systems using EtherNet/IP or PROFINET, these rugged, DIN rail mountable switches with metal housing provides security and easy installation (mounting kit is included).

Hardware & Technical Specifications:

IDS-108GE Industrial Gigabit Switches
Interfaces

RJ45| 8 x RJ45 ports for 10/100/1000Base-T up to 100 meters (328 ft)
Auto-negotiation
Auto-MDI/MDIX-crossover for use with either crossover over straight-through cable types
Ethernet isolation 1500 V
---|---
Alarm Contact| One relay output with current 0.5A@30V
Power
Dual Power Input| 12/24/48VDC (9-55VDC)
Power Consumption| 5.55W max
Maximum Current
Consumption @ 24VDC| 0.16A @ 24VDC
Power Connector| 7-Pin Removable Terminal Block
Overload Current Protection| 2A fuse provides overload current protection
Reverse Polarity Protection| The positive and negative inputs can be reversed providing safe and simple power connectivity.
Switch Properties
Standards| IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/FX
IEEE 802.3az Energy Efficient Ethernet
IEEE 802.1p Quality of Service (QoS)
Processing Type| Store-and-Forward
Auto Negotiation
Half-duplex back-pressure and IEEE
802.3x full-duplex flow control
Auto MDI/MDIX
MAC Address Table Size| 4K
Packet Buffer Memory| 1.5 Mbit
Jumbo Frame Size| 9216 bytes
Forward/Filtering Rate| 14,880pps for 10Mbps
148,810pps for 100Mbps
1,488,100pps for 1000Mbps
Indicators
Power LED 1| This LED is green when power is applied
Power LED 2| This LED is green when power is applied
Fault LED| This LED is red when a fault is detected
RJ45 / SFP Ethernet LED| These LED is solid green for established link and bllinks green when activity is detected (per port)
Environmental Specifications
Operating Temperature Ranges| IDS-108GE: -10 to 60°C (14 to 140°F)
IDS-108GE-XT: -40 to 75°C (-40 to 167°F)
Storage Temperature Range| -40 to 85°C (-40 to 185°F)
Operating Humidity Range| 5% to 90% non-condensing
Storage Humidity Range| 5% to 95% non-condensing
Operating Altitude| Up to 3,048 meters (10,000 feet)
Din Rail Mountable| DIN Rail attachment included. Mounts to standard 35 mm DIN rail in accordance with DIN EN 60175.
Maximum Heat Output| 18.926 BTU/Hr
MTBF| 3093836 hours
MTBF Calculation model based on MIL-HDBK-217-FN2 @ 25°C
Product Weight and Dimensions
Weight| 0.336 Kg, 0.74 lbs
Dimensions| 45x75x100mm (W x D x H)
(1.77″x2.95″x3.94″)
Packaging
Shipping Weight| 336g (0.74lbs)
Shipping Dimensions| 45x75x100mm, 1.77″x2.95″x3.94″ (W x D x H)
Contents Shipped| Industrial Ethernet Switch with DIN Rail attachment
Terminal block
Installation guide
Standards and Certifications
Safety| UL 61010
EMC Emissions| FCC Part 15 Class A
VCCI Class A
EN 61000-6-4
ICES-003
EN 55032
EMC Immunity| EN 61000-6-2
EN 61000-4-2 (ESD)
EEN 61000-4-3 (Radiated RFI)
EN 61000-4-4 (Burst)
EN 61000-4-5 (Surge)
EN 61000-4-6 (Induced RFI)
EN 61000-4-8 (Magnetic field)
Industrial| EN 50121-4
Environmental Test Compliance| IEC 60068-2-6 Fc (Vibration)
IEC 60068-2-27 Ea (Shock)
Environmental| Reach, RoHS and WEEE Compliant
Other| ECCN: 5A991
HTSUS Number: 8517.62.0020
5 year warranty