gorenje GTW641KB Built In Cooktops User Manual

gorenje GTW641KB Built In Cooktops

Please first read this manual!

Dear Customer,
We desire you get the most out of this product which is produced in modern facilities on basis of high quality. For this reason, please read this manual carefully and thoroughly prior to using the product and keep it for future reference. If you assign the product to anybody else, please give it together with the user’s manual. When using the product, take into consideration all information and cautions specified in the manual and comply with the instructions.

Symbols used in the user’s manual and their corresponding meanings:

• Important information and useful tips for use
• Warning against life and property risks
• Warnings against electric shocks
• Warning against fire risk
• Warning against hot surfaces

The user manual helps you use the product quickly and safely.

• Please read the user’s manual prior to its installation and operation of it.
• Always comply with safety-related instructions.
• Keep the user’s manual at an easily accessible place as you may need it for reference in the future.
• Please read the other documents provided with the product as well. Please remember that this user’s manual may also be applicable for other versions. Differences between the versions are clearly indicated in the manual.

IMPORTANT SAFETY INSTRUCTIONS

This section contains safety instructions to help prevention of physical injury or material damage. Failure to comply with these instructions makes any warranty invalid.

General Safety

• This product is not designed for use by persons (including children) who are lack of knowledge or experience and have deficient physical, sensual or cognitive skills unless they are attended by a person to take care of their safety or give necessary instructions for use of the product. The children should be supervised and never be allowed playing with the product.
• Plug the product to an outlet/mains protected by a fuse of such value as given in the table “Technical specifications”. In case of use with or without a transformer, remember to get the earthing installation done by a qualified electrician. If the product is used without proper earthing as per the applicable local regulations, our firm shall not be responsible for any resulting loss.
• If the power cable/plug is damaged, do not operate the product. Contact the Authorized Service Center.
• If the product is damaged and has noticeable damage, do not operate the product.
• Do not perform any repair or modification on the product. However, you may remedy some troubles; see suggested solutions for the problems, page 18.
• Never wash the product by spraying or pouring water on it! There is a risk of electric shock!
• Do not use the product under the conditions when your judgment is affected due to the effect of medical drugs and/or alcohol.
• Disconnect the product with the mains during the installation, maintenance, cleaning, and repair operations.
• Always get the installation and repair operations done by an authorized service center. The manufacturing firm may not be held responsible for any loss that may arise due to operations performed by any unauthorized persons and consequently, the product warranty becomes invalid.
• Be careful when using alcohol in the food. The alcohol evaporates at high temperatures and when it contacts with hot surfaces, it may inflame and cause fire.
• Do not heat the sealed cans and glass jars. The resulting pressure may cause a burst of the jar.
• As the edges of the product will be hot when working, do not put any flammable substances near it.
• Keep open all around the ventilation channels.
• The product may be hot during use. Do not touch the hot parts and heating elements, etc.
• Make sure the product is switched off after each use.
• Product and accessible parts of the product are hot during use of it.
• Do not touch the product in use.
• Do not use sharp and piercing tools when cleaning the glass; such materials may give harm to your product.
• As superheated oil may cause fire, always keep watch when the product is in use.
• In case of a possible fire, do not attempt to extinguish the fire with water; disconnect the power connection of the product immediately and cover the fire with the help of a wet blanket.
• Do not use a steam cleaner.
• If the glass of the product is broken: switch off all burners and any electric heater element immediately and disconnect the power supply of the equipment; do not touch the surface of the equipment and do not use the equipment.
• To clean the glass of the range, never you abrasive agents or sharp metal scrapers that may destroy the surface and cause the glass to be broken.
• Do not use the product on nylon, flammable and heat-sensitive materials.
• Pots placed on the heaters of the range should be in proper sizes.
• Do not scrub the buttons and inox surfaces of the range by means of scrapping objects; do not use Scotch-Brite.
• If the flame of the burner is accidentally off, the burner is switched off in a controlled manner and it is not fired for a minimum of 1 minute.

Safety for children
The exposed parts of the product will get heated during use and after use until it cools down; keep children away.

• CAUTION: During use of the grill, the accessible parts may be hot. You should keep the children away from the product.
• Children under 8 eight years old should not touch the product when they are unattended by an adult.
• This equipment may be used by children above 8 years old and/or persons who are handicapped physically, sensually or cognitively if they are duly informed about risks and safe use of the product.
• The children should not play with the product. Cleaning and maintenance of the equipment may not be performed by the children unattended.
• Packaging materials may be dangerous for children. Keep the packaging materials at a place not accessible by the children or throw in the garbage by sorting out according to the instructions on waste.

Safety of the electric-related works

• All Works on the electric equipment and systems should be performed by an authorized and qualified person.
• This product is not suitable for you with a remote system.
• In case of any damage, switch off the product or disconnect the power supply. To this end, switch of the fuse of the house.
• Make sure the fuse rated value is same as the current of the product.

Intended use
This product is designed for domestic use. It is not allowed for industrial use.

CAUTION:
This product should be used for cooking only. It should not be used for different purposes such as heating a room, etc.

The producer may not be held responsible for any loss that may occur due to improper use or during transportation. The service life of the product you purchase is 10 years. This is the time during which the producer should make available spare parts necessary for the operation of the product in a specified way.

INSTALLATION

Prior to use of the product

• Make sure the power and/or gas installation is suitable. If not, make the necessary arrangements by means of a qualified technical and installer.
• The customer shall be responsible for the preparation of the place where the product shall be placed as well as the power and/or gas installation.
• For installation of the product, you should comply with the rules specified in the local standards concerning power and/or gas
• Control the product prior to installation to find out whether there is any damage or not. If the product is damaged, do not make the installation. The damaged products may cause a risk for your safety.
• Any works on the gas equipment and system should be performed by authorized and qualified persons.
• The products have no system for the discharge of gas that may occur as a result of burning. The product should be installed and connected as per the applicable regulations concerning installation. You should observe the requirements regarding ventilation.
• Air necessary for burning is taken from the room air and the emitted gases are directly given to the room.
• Good ventilation is required in the room for the safe operation of your product. If there is no window or door to be used for ventilation of the room, an additional ventilation system should be installed.
• The floor area of the kitchen should be bigger than 8m². The kitchen volume should be bigger than 20m³.
• The chimney outlet should be at a height of 1.80m from the floor and in diameter of 150mm directly opening to the atmosphere.
• Air vent should be near the kitchen floor and a minimum75 cm², opening to the outer atmosphere

Installation and connections

Preparation of the built-it range prior to installation

• T urn upside down range in the Styrofoam in the package and apply the silicon.
• In case of inox products, apply the silicon on the inox surface, and in the case of glass, range products apply it to the glass surface.
• Apply the silicon supplied in the package around the range as shown in the figure.
• Mounting legs connection holes.
• Place the mounting legs as shown in the figure.

1. Glass
2. Silicon Seal
3. Tray
4. Connection Element
5. Upper Tray
6. Silicon Seal
7. Counter Surface
8. Connection Clips
9. Screw

The range is equipped with a seal to prevent the liquids through the cavities into the cabinet. In order to place this seal, adhere the seal as shown in the figures above. Turn the range upside down and remove the protective tape of the rubber seal and adhere it to the range; both ends of the seal should meet each other. Install the mounting sheets as shown in figure 5 with the help of a screw. And place the range in the opening on the counter.

Appliance dimensions

• GT641KB
• GTW641KB

Figure 7 shows the size to which the counter will be cut for the installation of the range. Place the prepared range into the counter cut to these sizes. If you will use the range on the built-in oven, observe figures 8 and 9 for proper air circulation between the oven and range.

Start to use after you remove the protective film on the Inox surface.

Wiring

You should definitely use an earthed line for the product!
The manufacturing firm shall not be responsible for any damages that may occur if the product is used without the earth.

• Electric shock, short-circuit, or fire risk arising from the installation performed by any unprofessional persons! The product should be connected to the mains only by an authorized and qualified person and the warranty of the product starts only after correct installation.
• Power shock, short-circuit, or fire risk arising from damaged power cable! The power cable should be crushed, crinkled or pinched or should not contact with the hot parts of the product. If the power cable gets damaged, it should be replaced by a qualified electrician.
• The main supply data should be the same as the data indicated on the nameplate of the unit. You may find the nameplate at the back of or under the product.
• The connection cable of the product should comply with the technical specifications and power consumption.

Risk of electric shock! Before performing any work on the electric installation, please disconnect the power supply of the product.

Gas connection

Any work on the gas equipment and systems should be performed by qualified and authorized persons. Prior to installation, make sure the conditions of local distribution (gas type and gas pressure) comply with the settings of the product.

LPG connection

Make sure the gas hose and gas pressure-reducing valve you use on the range are safe. Connect the gas delivery hose with the hose behind the range and tighten it by using a clamp and screwdriver (figure 10). Make sure it is firmly tightened. The gas delivery hose of the equipment should not be longer than 1500mm. The pressure of the pressure-reducing valve to be used for LPG should be 300mmSS and certificated.

The gas delivery hose should not pass through the hot part behind the equipment. The temperature of the gas hose should not exceed 90°C (degree).

Prior to use, make sure the system does not leak any gas.

1. G1/2 Nipple)
2. Silicon seal
3. G1/2 Hose inlet ( gas inlet)
4. Metal clamp
5. Gas hose (inner diameter 8mm)

NG (natural gas) connection

1. G1/2 Nipple)
2. Silicon seal
3. G1/2 NG hose (EN 14800 compliant natural gas hose)

If your equipment is set for natural gas, get the equipment connected by the installation firm of the concerned natural gas distribution company. The natural gas connection of your equipment is ½”. If you desire to convert your equipment from LPG to natural gas or from natural gas to LPG, contact the nearest service center and make them do the required gas conversion settings.

Sealing inspection
Open the pressure-reducing valve or natural gas valve and control by application of much foamy water on the connection to find out any gas leakage.

Never control by flame

Final inspection

1. Plug the power cable into the socket and activate the fuse of the equipment.
2. Control the functions.

LPG-NG / NG-LPG conversion

Remove the burner cover and burner as shown in Figure 12. Remove the injector with the help of 7’s socket screwdriver as shown in Figure 12.1 Fix the injector (D) to be converted as shown in Figure 12.2. (see table 1). Replace the burner as shown in Figure 12.3. Turn on the burners respectively after conversion and remove the button on the control panel and set the flame length by tightening or loosening the screw on the gas valve (12.4 cock) or in the valve shaft.

Disposal of the product

Destruction of the package
Packaging materials are dangerous for children. Keep the packaging materials at a place not accessible by the children. The packaging of the product is made of recycled materials. And throw them in the garbage by shorting out as per the instructions on waste. Do not dispose of them together with the normal domestic waste.

Future transportation operations

• Keep the product in its original box and carry the product in this box. Comply with the instructions given on the box. If the original cartoon is not available, wrap the product with the blister packaging material or a thick paperboard and tape it firmly.
• Fix the heads and pot supports firmly with tape.
• Do not put any object on the product. The product should be carried upright.
• Control the general appearance of the product for any damage that might have occurred during transportation.

Disposal of the old product

Dispose of the old product in such a way that it will not give damage to the environment. A mark (WEEE) is present on this product, indicating that the electric and electronic equipment waste should be collected separately. This means that the equipment should be dealt with as per EU Directive 2002/96/EC to recycle or disintegrated into parts for minimizing its effect on the environment. For further information, please contact the local and regional authorities.

Electronic products which are not kept subject to the controlled waste gathering process constitute a potential risk for both environment and human health due to the harmful substances they contain. You may contact your authorized dealer or the municipal waste collection center to get information about how you may dispose of the product. Before you throw the product into the garbage, cut the electrical plug and break the cover lock, if any, in order that the children are not exposed to any risk.

ABOUT PRODUCT

General view

• Aa – Auxiliary burner
• Bb – Semi-rapid burner
• Cc – Rapid burner
• Dd – Wok burner

Technical specifications of your built-in range

Consumption values

Information according to regulation (EU only) 66/2014 Measurements acc. EN60350-2 (G30-30 mbar).

• The firm may make change in the technical specifications to improve the quality of the product without prior notice.
• The figures given in the manual are schematic and may not be exactly the same as your product.
• The values are given on the markings on the product or in the other printed documents provided with the product are values obtained under the laboratory conditions as per the applicable standards. These values may vary depending on the use and ambient conditions of the product.

Use of the range

First use
Start to use the equipment after the removal of the protective film on the Inox surface.

First cleaning
Some detergents or cleaning agents may give harm to the surface.

1. Remove all packaging materials.
2. Wipe the product surface with a damp cloth or sponge and wipe dry with a dry cloth.

Description of the use of the gas range:

1. Push and turn anticlockwise the gas range button for setting high flame.
2. Turn on the lighter depending on the characteristics of your range.
3. Set to the desired flame position.
4. When the desired cooking operation is over, bring the orange button to the top point by turning it clockwise to turn off the burner.

• The container size and the gas flame should match each other.
• The gas flame should be set in such a way that it should not spread out from the container base.
• P4u.t the cGoanst acinuter- aofs fc seantfeerteyd aonpp thaer aptotus b earer.

The thermal element activates the safety mechanism activates and cuts off the gas immediately against extinguishment of the top burners due to liquid overflown.

1. Push and turn anticlockwise the gas range button for setting high flame.
2. Turn on the lighter depending on the characteristics of your range.
3. After it turns on, hold press the button for 3-5 seconds and ensure the safety mechanism activates.
4. If it does not turn on after you push and release the button, repeat the same action by holding the button pressed for 15 seconds.
5. Set to the desired flame position.

If the product is cleaned regularly, its service life extends and the frequently encountered problems reduce.

Risk of electric shock!
Prior to cleaning, switch off the power of the product to avoid the risk of electric shock.

Hot surfaces may cause burns!
Wait for the product to cool down prior to cleaning the product.

• You should clean the product thoroughly after you use it each time. Thus the food remnants are easily cleaned and you prevent these remnants from being burnt when the product is used later on.
• No special cleaning agent is required for cleaning the product. Clean the product by use of dishwashing liquid, lukewarm water, and a soft cloth or sponge, and wipe clean with a dry cloth.
• Make sure you completely wipe off any liquid left after the cleaning and clean immediately any food around splashed during the cooking.
• Do not use any cleaning agent containing acid or chlorine for cleaning the stainless steel or inox surfaces and handle. Clean by wiping in a single direction by the help of a soft cloth with soap and liquid (non-scratching) detergent.
• Some detergents or cleaning agents may give harm the surface. Do not use abrasive detergents, cleaning powders/creams, or sharp objects.
• Do not use steam cleaning agents for cleaning.

Cleaning the control panel

Clean the control panel and control button with a damp cloth and wipe dry with a dry cloth.

• The control panel may get damaged! Do not remove the control button to clean the control panel.

Cleaning the range

There is no need for any range cleaner or other special cleaning agent to clean the range. It is recommended to qipe the range with a damp cloth when it is stil likewarm.

Suggested solutions for problems

Product does not operate

• The product is not plugged (earthed) to the socket. Make sure the equipment is plugged.
• The fuse is burnt or broken. Check the fuse in the fuse box. If the fuse is burnt, activate it again.

The product ignites but does not burn

• Gas is over.
• The cylinder valve or natural gas valve is closed.
• In the case of houses with a natural gas supply, if there is a gas leakage detector, the leak may be detected and gas cut off.
• The injector is clogged.

The flame burns low

• The cylinder is over.
• The injector is clogged.

When the product heats and cools down, metallic sounds are the heart

• Metal parts expand when heated and cause sound. This is not a cause of failure.

If you cannot eliminate the problem although you performed the instructions given in this section, call your service to get support. Never attempt to repair a product that does not operate.

Gorenje gospodinjski aparati, d.o.o. Partizanska cesta 12 3320 Velenje Slovenia.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>