PowerMax Fitness TD-M1 Treadmill Motorized Treadmill Owner’s Manual

PowerMax Fitness TD-M1 Treadmill Motorized Treadmill

Read all instructions carefully before using this product. Retain this owner’s manual for the future’s reference. Product may be slightly different with photos, it is subject to actual product. Thank you for purchasing the product.

1 YEAR LIMITED WARRANTY

PowerMax Fitness warrants to the original purchaser that this product is free from defects in material and workmanship when used for the purpose intended, under the conditions that it has been installed and operated in accordance with PowerMax Fitness’s Owner’s Manual. PowerMax Fitness’s obligation under this warranty is limited to replacing or repairing, free of charge, any parts which may prove to be defective under normal home use. This warranty does not include any damage caused by improper operation, misuse or commercial application. From the date of purchase, the frame is warranted to be free from defects for 1(one) year*.

Customer Care

Phone: +91-8080-206-206
Email: support@powermaxfitness.net
Support / Complaint Generation: support.powermaxfitness.net

This warranty is extended only to the original owner and is not transferable. When ordering replacement parts please have the following information ready:

1. Owner’s Manual
2. Model Number
3. Description of Parts
4. Part Number
5. Date of Purchase

• Terms and Conditions Apply. For T&C visit www.powermaxfitness.net

IMPORTANT PRECAUTIONS

WARNING:

The security key has a magnet which must be put in the display. At the end of the lace there is a clamp which should be attached to the clothes. The treadmill will start working only if the key is placed in the display. This is essential.
A correct lubrication of the treadmill with silicon oil or Teflon is really important.
This lubrication must be performed regularly depending on each person, even before its first use.
You must preserve the original packaging with its protections, purchase receipt, manual and components during the guarantee period.

In order to decrease the risk of suffering severe injuries, read carefully all the important instructions and warnings regarding the use of a treadmill before using it.

Our company doesn’t take any responsibility for personal injuries or property damages resulting from the use of this product.

1. Before starting any workout program, consult your doctor. It’s especially important for people older than 35 years old, people with health problem and pregnant women.

2. The owner must ensure that all users are correctly informed about the warnings.

3. Use the equipment as explained in the instruction’s manual.

4. Keep the equipment in an enclosed area, away from dust or humidity. Don’t store it in a garage, indoor backyard or near the water. Humidity, dust and water could lead to a malfunction of the equipment, annulling its guarantee.

5. Place the unit on a flat surface. If the surface is uneven, the proper functioning could be affected. Some models include levellers or levelling threads behind the legs, helping the levelling. Please read the manual to verify if your unit is provided with one of them.

6. The unit must be placed in a ventilated area. Don’t use it in places with sprays or with oxygen dispenser. The air your breath may be affected and cause an accident.

7. Keep children younger than 12 years old and pets away from the equipment. Keep the security distance.

8. Check in the manual the maximum weight your equipment can support. An excessive weight could lead to a malfunction in the operating system, which won’t be covered by the guarantee.

9. Wear suitable clothes and shoes. Do not use loose clothe that may get hooked.

10. If your equipment is working through a power supply: make sure that the power cord and plug are in good conditions. Carry out the connection only when the circuit has ground connection, otherwise it could cause damages on the equipment or in the property which the guarantee won’t cover. Power cords must be away from hot surfaces.

11. If it is a battery-powered unit: check and make sure that they are charged enough so the display will fully function.

12. If your equipment is provided with a security key, please understand the produce before using it. The security key has a magnet which must be put in the display. At the end of the lace there is a clamp which should be attached to the clothes. The treadmill will start working only if the key is placed in the display. THIS IS ESSENTIAL.

13. If your unit works thanks to a power supply: don’t put it into operation while you are on the belt. The motor would be unnecessarily loaded. The right way is placing yourself with open legs, each one on a side of the belt and sit up once it is ongoing.

14. If your unit works with an electric supply: check the speed it can reach, for your security.
    The best is to adjust gradually the speed in order to avoid sudden changes.

15. If your unit works through an electric supply: never leave the machine unattended while it’s working. Take the security key off, turn the “on” button into “off “and unplug the power cord.

16. If your equipment is provided with a pulse sensor, you may know it isn’t a medical instrument. It’s designed as a help for the workout and determines the tendencies of heart rates. There are some factors which could affect the accuracy of the heart rate interpretations, for example the movements of the user.

17. The machines don’t take too much space as they can be folded. Once folded, make sure that all is well assembled to the locking system, either if it has a lock or a hydraulic engine.
    Don’t try to move it or raise unless you are insured. Should any damage happen being the machine uninsured, it won’t be covered by the guarantee.

18. Check and tighten all screws on a regular basis, because due to vibrations screws and nuts tend to loosen. Damages caused by a lack of maintenance won’t be covered by the guarantee.

19. A correct lubrication of the treadmill with silicon oil or Teflon is REALLY IMPORTANT. This lubrication must be performed regularly depending on each person, even before its first use. The lubrication must be carried out this way: disconnect the equipment of the electricity supply (in case you have one), pull up the tapestry from the side with one hand and spread the oil on the board. Please repeat this procedure from the other lateral side.
    Connect the equipment to the power supply (in case you have one) and turn the “on” button (red button) into the correct position (I), insert the security key and let the treadmill work for several minutes without any weight on it. Repeat this action on a regular basis.

20. Two people will be needed in order to take the unit from the package. Otherwise, the damages caused in this moment won’t be covered by the guarantee.

21. Don’t let any object fall into the grooves.

22. If the unit works through a power cord: unplug always the power cord before cleaning it, after the workout and before performing any maintenance duty.

23. This unit is designed for a domestic purpose and in an interior place, not for business environment or outside.

24. Do a workout with stretches before and after the sessions, you will avoid injuries.

25. Drink water before, during and after the workout.

26. If you start feeling pain or dizziness while training: STOP IMMEDIATELY.

27. YOU MUST PRESERVE THE ORIGINAL PACKAGING WITH ITS PROTECTIONS, MANUAL AND COMPONENTS DURING THE GUARANTEE PERIOD.

28. The accessories can be different to the other models.

29. This electronic product can’t be thrown under any circumstances into the municipal rubbish bins. With the aim of preserving the environment, this product must be recycled according to the applicable law of your country. Please contact your town council to know more about this procedure.

30. Should you need technical assistance or advise with the installation of pieces, you can get in touch with us.

YOU MUST KEEP THE PURCHASE RECEIPT IN ORDER TO HAVE ACCESS TO THIS SERVICE KEEP THESE ADVISES FOR FUTURE REFERENCES

MAIN TECHNICAL FEATURES

SPECIFICATION

ASSEMBLY INSTRUCTION

Notice: Assembly requires two persons

| Main frame
N o.| F ittings| Qty.| No.| F ittings| Qty.
1| M10x44| 2| 6| Multi Wrench| 1
2| M8x20| 2| 7| Silicone oil| 1
3| M6x16| 2| 8| User’s Manual| 1
4| 5mm Wrench| 1| 9| Security Key| 1
5| 6mm Wrench| 1| 10| Side cover| 1

STEP 1

1. Carry out the machine from the package by two persons and place it lightly on flat floor, and put other fittings beside the machine.
2. Lift the upright tube in the direction of arrow a to the position shown below. Use 2pcs M6x16 and 2pcs M10 x 44 to fix the base frame and upright tube at b and c positions.
   

STEP 2

Lift the console to position as shown below and fix it with 2pcs M8X20

STEP 3

1. Put the side cover at the base frame as shown below.
2. Put the safety key on the console then can start to use machine.
   

WORKOUT GUIDELINES

BEWARE: Before starting to use this or any exercise programs, consult your doctor. This is especially important for people older than 35 years old, or for people with health problems.
If your equipment is provided with a pulse sensor, you must keep in mind this isn’t a medical instrument. Several factors can vary the accuracy of the heart rate interpretations. The pulse sensor is just a help for the work outs, determining the general tendencies of the heart rate.

PROGRAMM WITH WARM UP WORKOUTS:

WARM UP: Start stretching and slightly activating the muscles between 5 and 10 minutes. The warm up will increase your corporal temperature, your heart rate and your blood flow, making you ready for the workouts.

• WORKOUT FOCUSED ON THE TRAINING AREA : Do some exercises during 20-30 minutes with your heart rate (don’t maintain your heart rate more than 20 minutes during the first weeks of the exercise program). Breath constantly and deeply during the workout (never hold your breath).
• COOL DOWN: Finish with stretching exercises during 5-10 minutes. Stretching increases the flexibility of your muscles and help you to avoid injuries after the workouts.

FREQUENCY OF THE WORKOUT: In order to be fit or improve your shape, complete three workout sessions each week, with a rest day between the workouts. After some moths of regular training, you will be able of completing up to five workouts a week.

TREADMILL OPERATION

How to fold and move the treadmill

COMPUTER

CONSTITUTION TEST

APP GFIT

|
|
|

MANUAL

MODE

PROGRAM

MP3 MUSIC

MAINTENANCE

This product must be earthed. If the power cord is damaged, it must be replaced with a manufacturer recommended power cord.

DO NOT TANGLE THE POWER CORD

Regular maintenance of the treadmill

• Storage: Keep your equipment in an enclosed place, away from dust or humidity. Don’t store it neither in a garage or in an indoor backyard, or near the water. Humidity, dust and water could damage it and have an effect on its functioning

• Electric cable: Make sure that the cable and plug are in perfect conditions. Electric cables must be away from hot surfaces

• Screws and connecting cables: Supervise and tighten the screws on a regular basis, because due to the vibration the screws and nuts tend to loosen.

• Lubrication: It’s a correct lubrication of the treadmill with silicon oil or Teflon is really important. This lubrication must be performed regularly depending on its use even before the first use.

• The step to lubricate the running board is as follows: (see the above figure)
  a) Run the treadmill at highest speed.
  b) Put the silicon oil to hole at right side of motor cover.
  

• After running for a period of time, the treadmill must be configured with special cymene
  silicone oil for lubrication.

SUGGESTION:

Do not lubricate more than what you need to. Remember: regular and reasonable lubrication is to improve the lifespan of your treadmill.

ALIGN AND TIGHTEN THE BELT OF THE TREADMILL

Align the belt: Due to its use, the belt can move off centre. If the belt has moved to the left, start treadmill and increase the speed to 3MPH. Use the 6mm Wrench to turn the fixed left bolt clockwise or turn the fixed right bolt counter clockwise. Don’t tighten the belt too much in order to be able to walk. Repeat this procedure until the belt is properly aligned.

Tighten the belt : (if the belt slips on the treadmill when walking). Start treadmill and increase the speed to 3MPH.Using the 6mm Wrench, turn both bolts ¼ clockwise. If the belt is properly tight to walk, you must be able to pull up each side of the belt 5 or 7 cm off the platform. Be careful and maintain the belt aligned. Repeat this procedure until the belt is properly tightened.

Tighten the drive belt: If the drive belt becomes loose after using for a period of time, you need to:

1. Open the motor cover.
2. Use the 6mm wrench to turn the adjusting bolt clockwise.
3. Repeat this procedure until the drive belt is not slippery anymore.

• Cleaning: Don’t use abrasive products. A damp cloth is enough.
• • Levelling : If your unit is provided with levelling wheels, please adjust them in order to avoid vibrations and therefore malfunctions.

RECYCLING INFORMATION

This electronic product must not be disposed of in municipal waste. To preserve the environment, this product must be recycled after its useful life as required by law.

COMMON ERRORS

IC, and re-weld it or change new one
B) EMI gasket slip, not well fastened| Re-assemble screen
Not run smoothly| A) Driving position has resistance| Adjust driving position, or add some silicon oil
B) running belt too tight or too loose| Adjust the belt tension
C) PCB torque too big or too small| Adjust torque to right position
—–| A) safety key off| Put on safety key
E01| No Signal| Re-connect signal wire
Change new signal wire
Change new computer
Change new PCB
E02| Over current protection| Turn off power and restart
Check motor has smell not, change it if has.
Check PCB has smell or change it if has.
E03| Over load protection| Turn off power and restart
Adjust driving position, or oil
Check motor has smell not, change it if has.
Check PCB has smell or change it if has.
E04| Sudden big current protection| Turn off power and restart
Change new power tube on PCB.
Check if anywhere on machine get stuck
E05| Explosion-proof protection| Check input voltage is normal or not
Check PCB has smell or not, change it if has.
Check motor wire is well connected or not
E06| Motor wire problem| Re-connect motor wire or change new motor wire

WARRANTY

We have one-year quality warranty to the products. Within the warranty period, we provide the FREE replacement parts. If caused by incorrect assembly, incorrect use or change of parts failures, our company takes no responsibility. You should show our products series no. and relative pictures or information before getting the warranty. This treadmill is only for home use, if the problems occurred by commercial used, our company takes no responsibility.

www.powermaxfitness.net

References

• Treadmills – Buy Online Treadmill | Best Price Guarantee | Save up to 56%
• Treadmills – Buy Online Treadmill | Best Price Guarantee | Save up to 56%

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>