SenHaiX N61 Smart LTE Terminal User Manual

SenHaiX N61 Smart LTE Terminal

Product Information

• Product Name: N61 SMART LTE TERMINAL
• User Manual: MANUAL DE USUARIO
• Languages: AT BE BG HR CY CZ DK EE FI FR DE EL HU IE IT LV LT LU MT NL PL PT RO SK SI ES SE UK

Preface

The N61 SMART LTE TERMINAL is a versatile device that offers various features and functions. It supports multiple bands, including TDD-LTE, FDD-LTE, WCDMA, GSM/GPRS/EDGE, allowing for reliable and high-speed connectivity. The device runs on Android 7.0 and is equipped with an ARM Cortex-A53 Quadcore processor for smooth performance. With built-in WiFi, Bluetooth, and GPS capabilities, the N61 SMART LTE TERMINAL offers seamless wireless connectivity. It also has a USB port for additional connectivity options.

Specifications

• Supported Bands: TDD-LTE Banda 38 / 40 /41, FDD-LTE Banda 1 / 3 / 5 / 7 / 8 / 20, WCDMA Banda 1/2/5/8, GSM/GPRS/EDGE Banda 2 / 3 / 5 /8
• Display: 3.5″ 480×320 P
• Operating System: Android 7.0
• Processor: ARM Cortex-A53 Quadcore processor (1.2GHz)
• RAM: 1 GB
• Internal Storage: 8 GB
• Antenna: BT / WiFi incorporada
• WiFi: 2.4 GHz IEEE802.11 b/g/n
• Bluetooth: V4.0 / V3.0/ V2.1
• GPS: GPS (AGPS)/GLONASS/ BDS
• USB : USB 2.0
• SIM: Standard SIM
• Dimensions: 170 x 80 x 85 mm (no incluye antena)
• Weight: 380 grs.
• Power: 12-36V DC, 4 W
• Color: Negro

Packing List

Please unpack carefully and check that you have received the following items. If any item is missing or damaged, please contact your dealer.

NOTE: Optional Accessories: Car Charge, Adaptor

Product Overview

Product Layout

Mobile Radio

Palm Microphone

Installation

Instructions
Before installing the radio in a vehicle, read the fol-lowing instructions carefully:

• The radio must work with a 13.6V±15% nega-tive ground electrical system only. Ensure to check the polarity and voltage of the vehicle power supply.
• Check how long the screws will extend from the bottom surface of the radio. Drill the mounting hole cautiously to avoid damage to the vehicle wiring and other parts.
• Connect the antenna and power cord to the radio before you install the radio in the brack-et. Use the antenna and power cord autho-rized by the Company only.
• Install the radio with the mounting bracket supplied by the Company to avoid radio looseness in case of accidents.The loose radio may cause bodily injury.
• Install the radio in a location where you can reach the front panel conveniently.
• Keep sufficient clearance at the back of the radio for wiring.
• Be sure to use the fuse with the same specifi-cation for the DC power cord upon replace-ment.

Tools

• Electric drill
• Cross head screwdriver
• T20 torx screwdriver

Parts

Basic Operations

Turning the Radio On or Off
To turn the radio on or off, long press the Power Knob.

Adjusting the Volume
To increase or decrease the volume, Rotate the Volume Knob

Keypad Functions

Dialing / PTT

| Short press to make a call/Long press to send voice message, release to stop sending
Hang Up / Screen Lock| Short press to hang up/turn off screen
UP| Short press to select the last item in the menu
DOWN| Short press to select the next item in the menu

Operation Gesture

Operate icons, buttons, menus, virtual keyboards and other items through gestures.

• Tap: Lightly touch the screen once with your finger.
• Long press: Press and hold the icom to enter edit mode or pop-up menu on the desktop, list, etc areas.
• Swipe: Tap and hold the screen lightly and slide, the target area will follow the direc-tion of the finger.
• Two-finger zoom: In some programs such as pictures, you can zoom in or out with two fingers on the screen
• Drag: Hold down the icon with your finger and move your finger to drag the icon.
• Double-tap: Tap the screen twice in succession.

Install SIM / Memory Card

1. Open the bottom card cover of the two way radio
2. Align the SIM/memory card with the corre-sponding socket and insert

NOTE: Please safely uninstall or shut down and then remove the memory card, Otherwise it may cause system problems.

Specifications

Bands

| TDD-LTE

Bands 38 / 40 /41

---|---
FDD-LTE

Bands 1 / 3 / 5 / 7 / 8 / 20

WCDMA

Bands1/2/5/8

GSM/GPRS/EDGE

Bands 2 / 3 / 5 /8

Display| 3.5” 480×320
Touch screen|
O.S.| Android 7.0
CPU| ARM Cortex-A53 Quad- core processor (1.2GHz)
RAM| 1 GB
ROM| 8 GB
Slot MicroSD| 1
Slot SIM card| 1
Operating voltage| 12-36V DC
Speaker| 4 W
Color| Black

Antenna

| GSM: SMA connection
GPS: SMA connection
Built-in BT / WiFi antenna
WiFi| 2.4 GHz IEEE802.11 b/g/n
Bluetooth| V4.0 / V3.0/ V2.1
---|---
GPS| GPS (AGPS)/GLONASS/

BDS

USB| USB 2.0
SIM type| Standard
Dimensions| 170 x 80 x 85 mm (w/o antenna)
Weight| 380 grs.

Care and Cleaning

To guarantee optimal performance as well as a long service life of the product, please follow these tips.

Product Care

• GDo not pierce or scrape the product.
• Keep the product far away from substances that can corrode the circuitry.
• Do not hold the product by the antenna or earpiece cable.
• Close the audio accessory connector cover when no accessory is in use.

ProductCleaning

Caution: Turn the product off before cleaning.

• Clean up the dust and fine particles on the product surface and charging piece with a clean and dry lintfree cloth or a brush regularly.
• Use neutral cleanser and a non-woven fabric to clean the keys, knobs, and front case after long-time use. Do not use chemical preparation such as stain removers, alcohol, sprays or oil preparations, so as to avoid surface case damage.
• Make sure the product is completely dry before use.

Troubleshooting

secure

connection.

During receiving, the voice is weak or intermittent.

| The volume level may be low.| Increase the volume
The communication signal strength may be weak.| Make sure the terminal is within the network coverage
The speaker may be blocked.| Clean the surface of the speaker
You cannot use the keys.| The keypad may not work temporarily| Restart the radio.
The keypad is broken.| Contact the dealer or our Company for customer service
The LCD does not display any information.| The palm microphone of the transmitting radio is not connected properly| Remove and reattach the palm microphone
The display is broken| Contact the dealer or our Company for customer service

The GPS does not work.

| The GPS antenna is not connected properly.| Properly connect the GPS antenna
You may be in an unfavourable position where the GPS

signal is too weak to receive.

| Move to an open and flat area, restart the radio, and try

again.

The terminal fails to connect to the cellular network.

| The SIM card fails to function properly or is out of service because of unpaid charges.| Make sure the SIM card functions properly or pay the charges.
The cellular network is not enabled for the SIM card.| Contact the carrier to enable the cellular network
The communication signal strength may be weak| Make sure the terminal is within the network coverage
Both the cellular network and WLAN are turned on, but the WLAN connection is unstable.| Turn the WLAN off.
The terminal fails to detect the SIM card.| The SIM card may be installed improperly.| Remove and reattach the SIM card.
The SIM card may suffer from poor contact caused by dirty

or damaged metal contacts.

| Clean the metal contacts

EU DECLARATION OF CONFORMITY
FALCON RADIO & ACCESSORIES SUPPLY, S.L. ID no.: B-60565314. C/ Vallespir, nº 13. Polígono Industrial Fontsanta.
08970 Sant Joan Despí – Barcelona (SPAIN).

Phone no.: (+34) 934 579 710
WEB:www.telecomfalcon.com

Product description

• Equipment: GSM, 3G, 4G/LTE SMART PoC MOBILE TERMINAL WITH 3,5” LCD.
• Brand : SENHAIX
• Model: SPTT-N61
• Manufacturer: Fujian Senhaix Electronic Technology  Co., Ltd. Made in: China

The product complies with the provisions of the European Directive 2014/53/EU of the European Parliament and of the council of 16 April 2014 on the harmonization of the laws of the member States relating to the making available on the market of radio equipment and repealing Directive 1999/05/EC. The standards granting presumption of conformity with this Directive are:

• EN 62368-1:2014+A11:2017
• EN 62311:2008
• EN 50665:2017
• ETSI EN 301 489-1 V2.2.3: 2019-11
• ETSI EN 301 489-17 V3.2.4: 2020-09
• ETSI EN 301 489-19 V2.1.1: 2019-04
• ETSI EN 301 489-52 V1.1.2:2020-12(Draft)
• EN 55032:2015/A11:2020
• EN IEC 61000-3-2:2019
• EN 61000-3-3:2013/A1:2019
• EN 55035:2017/A11:2020
• ETSI EN 300 328 V2.2.2 (2019-07)
• ETSI EN 303 413 V1.1.1 2017-06
• ETSI EN 301 511 V12.5.1: 2017-03
• EN 301 908-1 V13.1.1(2019-11)
• EN 301 908-2 V13.1.1(2020-06)
• ETSI EN 301 908-1 V13.1.1(2019-11)
• ETSI EN 301 908-13 V13.1.1(2019-11)

The notified body 1177 “TIMCO Engineering, Inc” has issued the EU Type Examination Certificate no.: E-1177-210817
Sant Joan Despí-Barcelona (Spain), 2021 November 19

CERTIFICATE OF GUARANTEE

FALCON RADIO & A.S., S.L.
CIF: B-60565314 C/ Vallespir, nº 13. Polígono Industrial Fontsanta. 08970 Sant Joan Despí. Barcelona (España).
Tfno: +34 93 457 97 10
WEB: www.telecomfalcon.com

Buyer’s name:
Address:| Seal and dealer’s name:
City:| Zip Code:
Province:| Phone number:
Date of purchase:|
WARNING: The warranty is valid only when it’s total and duly completed, legibly and clearly, with the seal and

dealer’s name and have attached the purchase invoce of the device.

PURCHASE GUARANTEE:

• The guarantee includes all the rights that the consumer or user has in accordance with the provisions of Spanish Royal Legislative Decree 1/2007 of November 16, which approves the consolidated text of the General Law for the Defense of Consumers and Users. These warranty conditions are independent of the rights that the consumer or user has against the seller derived from the contract of sale of the device.
• This device is guaranteed for a period of 2 years, to repair free of charge any breakdown or defect provided that it is due to a manufacturing problem or a defective component that involves a malfunction of the device.
• The guarantee is unique and non-transferable, and cannot be issued again either in original or in copy. The replacement by failure of the device, any accessory or part thereof will not imply an extension of the warranty. In the event that the device is replaced by a new one, the term will always have at least a 6-month warranty period from delivery, but in no case does a new 2-year period begin.
• The warranty covers the replacement and free replacement of all parts that present defects in the materials and components used in the manufacture and/or assembly of the device.
• Checking the accessories is the responsibility of the end customer at the time of purchase of the device.
• The warranty does not cover rechargeable batteries even if they are part of the device because they are considered fungible material. Its possible defect must be notified within a maximum period of FIFTEEN DAYS counted from the date of purchase of the device.
• The warranty does not cover possible failures caused by accidents, improper installation and use, use of non-original or incompatible accessories, connection to a voltage other than that specified, or claims due to deterioration in the external appearance due to normal use or repairs or manipulations carried out by personnel outside the Technical Service.
• The warranty will be voided in devices and accessories in which the serial number has been modified or is illegible.
• The warranty will also be voided by any firmware update done by unauthorized personnel, frequency range modification as well as any damage to the power transistor.
• For warranty conditions it is necessary to deliver the damaged device along with its accessories and the following documents to the seller’s establishment or the Technical Service:
  1. Purchase invoice or original ticket.
  2. Description of the fault or defects found.

We recommend that you save the invoice or purchase ticket of the device during your warranty period.

Waste disposal. Directive 2012/19 / EU
Information on waste disposal of electrical and electronic equipment (WEEE).
This symbol on the product means that the electrical and electronic products used must not be mixed with household waste. For proper treatment, recovery and recycling, take this product to designated collection points where it will be accepted for free.

The correct disposal of this product will help save valuable resources and prevent possible negative effects on human health and the environment, which could otherwise arise from the improper handling of waste..
Contact your local authority for more information about the nearest collection point. Sanctions may be applied for the incorrect disposal of this waste, in accor-dance with its national legislation.
These symbols on the batteries mean:

• Pb = contains more than 0.004 percent by weight of lead
• Cd = contains more than 0.002 percent by weight of cadmium
• Hg = contains more than 0.0005 percent by weight of mercury

You can also send the transceiver and the battery to our warehouse. Postal fees must be paid by the sender.

This device complies with Directive 2011/65/EU and its subsequent modifications according to Directive 2015/863/EU on restrictions on the use of modifications of hazardous substances in the manufacture of electrical and electronic equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>