BANDA 3K1OHMRED Vehicle Audio Bass Amplifier User Manual
- June 12, 2024
- BANDA
Table of Contents
BANDA 3K1OHMRED Vehicle Audio Bass Amplifier
DESCRIPTION
The BANDA 3K1OHMRED is a bass amplifier for vehicles that has been created to improve the low-frequency performance of audio systems in automobiles. This amplifier is designed to generate powerful bass tones, as seen by its power output of 3100 watts and its impedance of 1 ohm. Because of its small size, it can be easily installed within the limits of a vehicle, and the color red lends an air of sophistication to the accessory. The BANDA 3K1OHMRED amplifier has been designed to deliver accurate and powerful bass reproduction, which improves the quality of the audio experience as a whole for people who are passionate about cars.
SPECIFICATIONS
- Voltage: 15 Volts
- Brand: BANDA
- Number of Channels: 1
- Package Dimensions: 12.8 x 10.79 x 2.6 inches
- Item Weight: 1 pound
- Item model number: 3K1OHMRED
WHAT’S IN THE BOX
- Vehicle Audio Bass Amplifier
- User Manual
FEATURES
-
ELECTRICAL POWER:
Amplifier for the audio system in a vehicle that is a Class D design, with the following power ratings: Total Power 14.4 at 1 Ohm; 3600 WRMS; Total Power 14.4 at 2 Ohms; 2400 WRMS; Total Power 12.6 at 1 Ohm; 3000 WRMS; Total Power 12.6 at 2 Ohms; 1800 WRMS; Efficiency at 2 Ohms: 82%; Efficiency at 1 Ohm: 75%; Class D; Total Power; 14. -
INDICATORS FOR THE MONO BASS AMPLIFIER:
The source and powered amplifier are indicated by the blue LED. Indicator of output distortion (clipping) and constant shorting as well as thermal protection is provided by the red LED. A flashing yellow LED indicates that the voltage is below the specified range. -
IMPEDANCE AND POWER OUTPUT:
Input Voltage: 9 to 15 V; Input Impedance: 100 KOhms; Total Harmonic Distortion (THD) and Noise: less than 1%; Input Sensitivity is between 110 millivolts and eight volts, and the Signal to Noise Ratio is 82 decibels. -
SPECIALIZATION IN THE AUDIO FIELD:
This high-powered Power Amplifier represents the pinnacle of contemporary technological achievement. The use of RCA connections guarantees a safe connection between the amplifier and the speakers, resulting in a sound that is free of distortion. -
ADDITIONAL TECHNICAL DETAILS:
Recommended Fuse Rating: 150A, Current at Rest: 2A, Average Current Draw (Sinusoidal): 320A, Average Current Draw (Music): 160A, Recommended Fuse Rating: 150A, Current at Rest: 2A, The gauge of the power wires is 21mm/4 AWG. Speaker Wire Size: 12.3 inches x 10.6 inches x 2.4 inches, Speaker Wire Gauge: 2 mm x 4 mm / 11 AWG
Note:
Products that are equipped with electrical plugs are suitable for use in the
United States. Because power outlets and voltage levels vary from country to
country, it is possible that you will need an adaptor or converter in order to
use this device at your destination. Before making a purchase, you should make
sure everything is compatible.
CONNECTIONS
-
Connecting to the Power Grid:
Establish a connection between the positive (+) connector of the power input on the amplifier and the positive terminal of the battery in your car. Establish a connection between the amplifier’s negative (-) power input terminal and a stable ground point located within the vehicle. To meet the power requirements of the amplifier, make sure the power and ground cables you use have the suitable gauge. -
Connection for Remote Turn-On of Appliances:
Join the wire for the remote turn-on function that is located on your head unit or other audio source to the terminal that is located on the amplifier. Activating and deactivating the amplifier in tandem with your audio system is communicated through this cable. -
Connection for the Audio Input:
Make the connection between the audio inputs on the amplifier and the appropriate RCA outputs on the head unit or audio source by using RCA cables. The audio signal that the amplifier will magnify is fed into the amplifier through these inputs. -
Speaker Connection to the Output:
Connect the speaker wires coming from the amplifier’s speaker output terminals to the terminals on your subwoofer(s) or speakers that are corresponding to those on the amplifier. Be sure that the positive and negative terminals are connected in the correct order. -
Installation of the Fuse:
Put in a suitable fuse on the positive power connection, and position it so that it is close to the battery. This helps protect the amplifier as well as the electrical system in your vehicle from any potential problems that may arise. -
Connection to the Ground:
Connecting the ground terminal of the amplifier to a metal spot on the chassis of the car will provide a reliable ground connection that is also free of contaminants. This connection is necessary for the amplifier to function in the correct manner. -
Line Output Converter (LOC): This component is optional:
In the event that your head unit does not come equipped with RCA outputs, you may be required to make use of a line output converter in order to change the speaker-level outputs from the head unit into RCA outputs for the amplifier. -
Installation of the Capacitor is Voluntary:
A capacitor can help stabilize voltage and offer more power while big bass impacts are being played, therefore you might decide to install one in your system if the power demands of the system are high enough.
PRECAUTIONS
-
Installation & Wiring Done Correctly:
Make sure that all of the wiring, including the connections for the power, the ground, the remote turn-on, and the speakers, is appropriately connected in accordance with the advice and guidelines provided by the manufacturer. Incorrect wiring can result in decreased performance, more damage, and even increased risk of fire. -
Make Sure to Use the Right Wire Gauge:
When handling the power requirements of the amplifier, make sure to use wiring of the suitable gauge. A wire system with insufficient capacity might result in voltage dips, diminished performance, and even possible overheating. -
Wiring and Components That Are Kept Safe:
Make sure that all of the components and wiring are securely fastened so that they do not get loose or cause vibrations that could cause the equipment to become damaged. -
Getting a Grip:
Make sure that the amplifier is correctly grounded to a spot on the chassis of the car that is clean and unpainted and made of metal. It is imperative that the amplifier have a rock-solid ground connection in order for it to safely perform as intended. -
To combine:
Put in the appropriate fuse on the power cable that is located close to the battery. This fuse protects the amplifier as well as the electrical system of the car from any potential problems, such as overloads or short circuits. -
Ventilation and Air Conditioning:
Install the amplifier in a location that has adequate ventilation to prevent it from overheating. You should avoid confining the amplifier in a confined place that will limit the movement of air. -
Take Care Not to Obstruct the Air Vents:
It is important to keep the cooling vents and heat sinks on the amplifier clear of any impediments. Overheating and decreased performance are also potential outcomes of blocked ventilation. -
Stay away from any water or moisture:
Avert any contact with water or dampness to protect the amplifier and its connections. Electronics are susceptible to damage from moisture, which also presents a concern to public safety. -
Amplifier that is Safe:
Make sure that the amplifier is put in a secure location so that it does not move around or vibrate while you are driving. This could cause it to become damaged. -
Check the Power Ratings as well as the Impedance:
Be certain that the impedance and power ratings of the speakers and subwoofers that you are connecting to the amplifier are compatible with those of the amplifier. Components that are not a good match for one another can result in poor sound quality or even damage. -
Use the Appropriate Fuses:
Make sure to only use fuses that have the specified current rating that the manufacturer recommends. Using the incorrect fuse can put the user’s safety at risk. -
Take care not to overload:
It is important to avoid exceeding the amplifier’s power restrictions for extended periods of time, since this might cause the device to overheat, result in distortion, and expose it to potential harm. -
Separate the Battery From:
When working on the electrical system of a vehicle, it is important to ensure that the negative terminal of the vehicle’s battery is disconnected. This will avoid any inadvertent short circuits from occurring. -
Check with a Qualified Professional Installer:
If you are confused about any part of the installation procedure, you should probably think about getting assistance from a professional car audio installer so that you can make sure everything is set up correctly and stay safe.
FREQUENTLY ASKED QUESTIONS
What is the BANDA 3K1OHMRED Vehicle Audio Bass Amplifier?
The BANDA 3K1OHMRED is a car audio amplifier designed to enhance the bass performance of your vehicle's sound system.
What is the power output of the BANDA 3K1OHMRED amplifier?
The amplifier has a power output of approximately 3000 watts, which can significantly boost the bass performance of your car audio system.
Is the BANDA 3K1OHMRED a mono or multi-channel amplifier?
What are the benefits of using a bass amplifier in a car audio system?
A bass amplifier enhances the low-frequency response of your audio system, providing a more powerful and impactful bass sound.
Does the BANDA 3K1OHMRED come with built-in crossover controls?
Many amplifiers include adjustable crossovers to fine-tune the frequency range that the amplifier sends to the connected speakers or subwoofers.
Is the BANDA 3K1OHMRED amplifier compatible with all car audio systems?
The amplifier is designed to work with various car audio systems, but compatibility with specific setups depends on the impedance and power requirements.
What is the impedance range that the amplifier supports?
Can the BANDA 3K1OHMRED amplifier be bridged to power multiple subwoofers?
Some mono amplifiers can be bridged to power multiple subwoofers, but you should consult the product manual to confirm if this feature is supported.
What type of wiring and power connections are required for installation?
The amplifier installation usually requires proper power and ground wiring, as well as RCA cables for audio input.
Does the amplifier include protection features against overheating or short circuits?
Many car amplifiers include protection mechanisms like thermal protection and short circuit protection to prevent damage to the amplifier and connected devices.
Is the BANDA 3K1OHMRED amplifier suitable for both casual listeners and car audio enthusiasts?
Yes, this amplifier can cater to both casual listeners and car audio enthusiasts who want to enhance their bass experience.
Does the amplifier come with a remote control for adjusting bass levels?
Some amplifiers come with remote bass level controls that allow you to adjust the bass output from the driver's seat.
Is the BANDA 3K1OHMRED amplifier compact for easy installation in vehicles?
The size and form factor of the amplifier can vary. Check the product dimensions to ensure it fits comfortably in your vehicle.
Does the amplifier support different bass boost or EQ settings?
Some amplifiers offer adjustable bass boost and equalization settings to fine- tune the bass response.
Can the BANDA 3K1OHMRED amplifier be used in combination with factory car stereos?
Yes, the amplifier can be integrated with factory car stereos, but you might need appropriate adapters for proper connectivity.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>