klipxtreme KTE-750 EdgebudsPro True Wireless Stereo Earbuds User Guide

: June 12, 2024
: KlipXtreme

Table of Contents

Introduction
Product overview
Basic operation
Advanced operation
Troubleshooting
Technical specifications
of charging case cycles before battery runs out| 4 cycles
FCC Statement
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EdgebudsPro KTE-750

Introduction

Thank you for purchasing the KlipXtreme KTE-750 True Wireless Stereo (TWS) wireless earbuds with Active Noise Canceling (ANC) technology. We encourage you to read this quick installation guide thoroughly to get the most out of this wireless device.
Main features

Premium earbuds with Active Noise Canceling (ANC) technology that blocks unwanted noise so you can focus on what you want to hear
Two active noise canceling modes: Normal mode cancels external sounds before you hear them, and Transparency mode allows to hear sounds around you without removing the earbuds
Environmental Noise Canceling (ENC) technology cancels out surrounding noise during your calls
True Wireless Stereo, designed to stream audio wirelessly through two separate units simultaneously from the same audio source
26 hours of total playback time with 6.5 hours per cycle for up to 4 cycles 3
Modern and sleek design
25dB noise canceling level to neutralize background noise without compromising the sound of your music
Smart touch design to play, pause, change modes, skip tracks, and answer or hang up calls with simple tap
IPX3 water resistant to rain, splashes, and sweat
Compatible with Google and Siri voice assistant, it supports the voice recognition feature for true hands-free control at the touch of a button
Built-in USB-C charging port for wired charging
Charging case includes LED indicators to display battery status
Bluetooth ® v5.3 latest technology enables more efficient channel selection from both devices to improve signal performance

Package content

• Wireless earbuds	(1 pair)
• Charging case	-1
• Type C charging cable	-1
• Ear tips (S, M, L)	(3 pairs)
• User’s guide	-1

Product overview

klipxtreme KTE-750 EdgebudsPro True Wireless Stereo Earbuds - Charging
case

Microphone/LED indicator
Multifunction button: press the multifunction button to power the earbuds on and off. Also press this button to enable/disable ANC and transparency mode, play or pause media, and to answer or end an incoming call
Charging case LED indicator: The four LED lights showcase battery status
Charging port: insert the Type C cable in this port to charge the battery
Earbuds charging area: the earbuds will receive the charge in this area when wirelessly charged

Basic operation

a. Charging the case and earbuds

To charge the case, plug the USB cable into a power source and the Type C end into the case’s charging port. The case starts charging automatically.
Charging the case battery to its full capacity may take 1.5 hour.
The four LED lights are on for 30 seconds and then turn off when the charging case is fully charged.
Unplug the case from the power source and place the earbuds on the sockets of the charging case. The charging level is showcased as follows:
– One LED light on indicates that the earbuds have 25% charge
– Two LED lights on, indicate 50% charge
– Three LED lights on, indicate 75% charge – Four LED lights on, indicate that the earbuds are fully charged

IMPORTANT: The touch button is sensitive. Therefore, please make sure to manipulate the earbuds by grabbing them from the arm to avoid taping the touch button by accident.
b. Turning your earbuds on or off

The earbuds automatically turn on when removed from the charging case or press and hold the multifunction button on each one for 3 seconds to turn them on.
As both earbuds synchronize, a voice promptwill be heard indicating that they are connected.
To turn the earbuds off, place them in the charging case and close the lid. To turn them off manually, press and hold the multifunction button on one of the earbuds for 5 seconds.

Advanced operation

a.TWS pairing
Simply take the earbuds out of the charging case or turn them on as it has been instructed previously. The earbuds LED indicator will blinkas the earbuds sync with each other automatically, and then enter into mobile pairing mode.
Note: Before installing this product, please make sure your device is Bluetooth ® compatible.
b. Pairing the earbuds with your mobile device

Turn both earbuds on by removing them from the charging case or pressing the multifunction button for 3 seconds. Both earbuds will automatically pair.
Set your Bluetooth ® mobile device to “discover” the wireless earbuds.
Place the earbuds and your phone not more than three feet from each other.
On your mobile phone, tap the newly discovered audio device KTE-750 being displayed in the Bluetooth ® list.
When the mobile device asks if you want to pair with it, click Yes or OK to accept.
If pairing is successful the “Done” prompt will be heard.
If after 60 seconds the pairing process fails, please repeat steps 1 through 5 as described above.
The earbuds will automatically go into standby mode after a short period of inactivity to save battery life.
You only need to pair the earbuds with your mobile phone once, as they will reconnect with memorized devices automatically.

Note: Either one of the earbuds may be used at a time. You can switch between the earbuds as you wish. Remove one earbud from the charging case and it will pair within 20 seconds.
c. Using the wireless earbuds

Answering and ending a call
• When there is an incoming call, your phone will ring along with a tone through your earbuds.
• Press the multifunction button once on any earbud to pick it up. You may also press the answer button on your mobile phone to receive the incoming communication in your earbuds.
• To end a call, press the multifunction button once again on any earbud. Likewise, you may also finish the call directly using the end key on your smartphone.
• To ignore an incoming call and send the caller to voicemail, double tap or hold the multifunction button on any earbud.
Music playback, voice commands, ANC and transparency mode using your earbuds

• Press the multifunction button once on either one of the earbuds to play and stop audio playback.

• Double tap the left button to go to the previous track.

• Double tap the right button to go to the next track.

• Triple tap the left button to lower the volume.

• Triple tap the right button to increase the volume.

• Press and hold the left button for 2 seconds to activate the voice assistant for Siri or Google. Press and hold again for 2 seconds to turn it off.
• When the earbuds are removed from the charging case, they are automatically in Bluetooth ® mode.
• Press and hold the right button for 2 seconds to switch mode (Transparency/ANC On/ANC Off).

Troubleshooting

If you can’t connect the earbuds to your mobile phone, try the following:

Make sure that the earbuds are charged, turned on, paired with, and connected to your mobile phone.
Make sure the Bluetooth ® feature is activated on your phone.

Precautions

Your earbuds are powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge your battery only with compatible chargers.
Unplug the USB charger from the source when not in use.
Parts of the earbuds are magnetic. Metallic materials may be attracted to the earbuds. Do not place credit cards or other magnetic storage media near the earbuds, as information stored on them may be erased.
Do NOT drop, hit or shake the device.
Do NOT disassemble, repair or modify the earbuds yourself.
Do NOT use strong chemicals, solvents, or detergents to clean the device.

Technical specifications

MPN	KTE-750
Device
Type	ANC and ENC TWS earbuds
Form factor	True wireless in-ears
Chipset	JL7003

of charging case cycles before battery runs out| 4 cycles

Earbud only battery runtime (with ANC enabled)| Up to 6.5 hours (50% volume)2
Earbud only battery runtime (with ANC disabled)| Up to 7.7 hours (50% volume)2
Earbuds total run time (including cycles)| Up to 30 hours (ANC off) – 26 hours (ANC on) 3
Battery standby time| About 120 hours
Dimensions|
Dimensions (LxWxH)| Charging case: 2.5x2x1.1in
Earbud: 1.4×0.9×0.7in
Weight| 1.6oz
Cable length| 39.3in
Package contents| Earbuds, Type C charging cable, 3
sets of ear tips, and user guide

Range estimate is based on an area free of obstacles and interference, and within line of sight between devices.
Depending on the volume level and type of music file being played.
Battery runtime can last 6.5 hours per charging cycle (4) for an estimated total of 26 hours combined (ANC on), and 7.7 hours per charging cycle (4) for an estimated total of 30 hours combined (ANC off).

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

KlipXtreme® is a registered trademark. All rights reserved. The Bluetooth ® brand is a registered trademark owned by Bluetooth SIG, Inc. Siri and all related logos are trademarks of Apple.com, Inc. Google Assistant is a trademark of Google LLC. All other brand names and trademarks are the property of their respective owners. Any mention of such is only intended for identification purposes, and therefore shall not be construed as a claim to any or all rights pertaining to those brands. Made in China.

www.klipXtreme.com.