Rohnson R-8500 40cm Stand Fan Instruction Manual

Rohnson R-8500 40cm Stand Fan

Product Information:

The Stand Fan is a 40 cm fan designed for general domestic use.
It operates on a voltage of 220-240V and a frequency of 50Hz. The model number is R-8500.

General Safety Instructions:

1. Read the instruction manual thoroughly before using the appliance and save it for future reference.
2. Follow basic safety precautions to reduce the risk of fire, electrical shock, and personal injury.
3. Handle the motor, plastic fan blades, and other fan parts carefully during assembly or disassembly to avoid injury or damage.
4. Keep the product out of the reach of children and pets.
5. Do not leave the product unattended while in use, especially when children are present.
6. Always unplug the product when not in use.
7. Operate the product on a flat, steady, and stable surface to prevent overturning.
8. Do not hang or wall-mount the product.
9. Avoid placing the product outside or near an open window to prevent electrical hazards.
10. Keep the power cord and product away from heated surfaces.
11. Always unplug the product before cleaning it.
12. Do not plug or unplug the product with wet hands.
13. Avoid inserting fingers or any other objects through the fan guards.
14. Do not drop or insert objects into any openings of the product.
15. Do not attempt to open any part of the motor housing to avoid electrical shock.
16. Never operate the product without the fan guards in place.
17. Do not allow the power cord to hang where it may be tripped over or pulled.
18. Do not use the product if the power cord is cut, damaged, or if the wires are exposed.
19. Avoid immersing or exposing the motor housing, power cord, or plug to water or other liquids.
20. Disconnect the plug from the electrical outlet by pulling on the plug, not the power cord.
21. Avoid putting stress on the power cord where it connects to the product.
22. This product is intended for indoor, non-commercial, non-industrial household use only. Do not use outdoors.
23. This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, unless supervised or instructed by a responsible person.
24. Supervise children to ensure they do not play with the appliance.

Overview of the Fan:

1. Front Grill
2. Blade Lock Nut
3. Blade
4. Grill Lock Nut
5. Back Grill
6. Motor
7. Front Motor Cover
8. Motor Cover
9. Oscillation Button
10. Fixed Nut
11. Fixed Screw
12. Motor Holder
13. Back Control Panel
14. Fixed Screw
15. Up Holder
16. Holder Lock Nut
17. Base Fixed Screw
18. Speed Button
19. Front Control Panel
20. Down Holder
21. Base Cover
22. Up Cross Base
23. Base Plastic Cover
24. Down Cross Base

Please refer to the instruction manual for detailed assembly and usage instructions.

STAND FAN 40 cm
220-240V,50Hz
Model : R-8500

BEFORE OPERATING THIS PRODUCT, READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.

BEFORE FIRST USE

General Safety Instructions

Read this instruction manual thoroughly before using the appliance and save it for future reference and if it is necessary pass the instruction manual on to a third party.

WARNING
When using electrical appliance, basic safety precautions should always be followed to reduce the risk of fire, electrical shock and personal injury.
Handle carefully the motor, the plastic fan blades, and other fan parts when assembling or disassembling them, to avoid injury and/or damage.

1. This product is intended for general domestic use. Do not use the product for any other purpose.
2. Keep the product out of the reach of children and pets. This product is not intended for use by children.
3. Do not leave the product unattended while it is in use, especially when children are present.
4. Always unplug the product from the electrical outlet when it is not in use.
5. Always operate the product on a flat, steady, and stable surface to avoid it overturning.
6. Do not hang or wall-mount the product.
7. Do not place the product outside or near an open window. Rain, snow, and other weather elements may create an electrical hazard.
8. Keep the power cord and product away from heated surfaces.
9. Always unplug the product from the electrical outlet when cleaning it.
10. Do not plug/unplug the product into/from the electrical outlet with a wet hand.
11. Never insert fingers or any other object through the fan guards.
12. Never drop or insert objects into any opening of the product
13. Do not attempt to open any part of the motor housing, as a risk of electrical shock may exist.
14. Never operate the product without the fan guards in place, as serious personal injury may result.
15. Do not allow the power cord to hang (i.e., over the edge of a table or counter) where it may be tripped over
16. or pulled.
17. Do not operate product if the power cord is cut, damaged, or if the wires are exposed.
18. Do not immerse or expose the motor housing, power cord, or plug to water or other liquids.
19. Disconnect the plug (do not pull on the power cord) from the electrical outlet.
20. Do not put any stress on the power cord where it connects to the product, as the power cord could fray and break.
21. Do not operate the product if it has a damaged power cord or plug, malfunctions, is dropped, or damaged. This product has no user – serviceable parts. Do not attempt to examine or repair this product yourself. Qualified service personnel should perform any servicing.
22. This product is intended for indoor, non-commercial, non-industrial; household use only. Do not use outdoors.
23. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
24. Children should be supervised to ensure that they do not play with the appliance.

OVERVIEW THE FAN

1. Front Grill
2. Blade Lock Nut
3. Blade
4. Grill Lock Nut
5. Back Grill
6. Motor
7. Front Motor Cover
8. Motor Cover
9. Oscillation Button
10. Fixed Nut
11. Fixed Screw
12. Motor Holder
13. Back Control Panel
14. Fixed Screw
15. Up Holder
16. Holder Lock Nut
17. Base Fixed Screw
18. Speed Button
19. Front Control Panel
20. Down Holder
21. Base Cover
22. Up Cross Base
23. Base Plastic Cover
24. Down Cross Base

ASSEMBLING THE FAN

1. Take all the appliance parts out of the packaging and remove all packaging materials and inserts.
2. Take the up cross base (22), put it into the down cross base (24), and fixed by base fixed screw (17). After that, put the 4pcs base plastic cover (23) into the each side of the cross base.
3. Take the base plastic cover (21), put it to cross the holder and cover the base well
4. Take the main body, put it into the up holder (15), and fixed by fixed screw(14)
5. Take the back grill (5), put it on the motor (6), and fixed by grill lock nut (4)
6. Take the blade (3), put it into the motor (6), and fixed by blade lock nut (2)
7. Take the front grill (1), put it to match the back grill (5). And fixed by fixed screw (11) and fixed nut (10)

SPEED FUNCTION

There’s 3 speed to select.

• 0—Off
• 1—Low
• 2—Medium
• 3—High

OSCILLATION

To make/stop the fan head oscillate. Push down/pull up the clutch knob.
To adjust the air flow upward or downward, push the grilles lightly to the desired direction.
The height of the fan can be adjust, by screw off the holder lock nut (16).

CLEANING AND MAINTENANCE

Before cleaning the appliance always disconnect the power plug from the receptacle.

• The appliance, the power cord and the power plug should not be immersed in water or other liquids when you are cleaning them. Clean them with a dry cloth.
• If it is very dirty, the outside of the appliance can be wiped carefully with a moist cloth and then dried carefully. Make sure that no moisture penetrates into the interior of the appliance.
• Do not use any harsh cleaners, steel brushes, scouring powder or other hard objects to clean the appliance as these can cause scratches on the surfaces.
• Clean the appliance regularly.
• Never use solvents, benzene, or oil-based cleaners as these can damage the housing.
• Re-tighten visible screw connections on the appliance regularly in order to ensure that the device is functioning properly.

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection center or to a dealer providing this service. Disposing of a household appliance separately avoids possible negative consequences for the environment and health, deriving form inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources. As a reminder of the need to dispose of household appliances separately, the product is marked with a crossed-out wheeled dustbin.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>