arlo Wire-Free Outdoor Siren App Installation Guide
- June 12, 2024
- Arlo
Table of Contents
Arlo Wire-Free Outdoor Siren
App Installation Guide
Wire-Free Outdoor Siren App
Pre-Requisite:
- Please reference to the Home Security System User Manual as your baseline to start off. Arlo Keypad Hub needs to be onboard first using the Arlo Secure App.
- The Arlo Wire-Free Outdoor Siren will be onboard to the Arlo Keypad Hub but due to Arlo App still in development phase, the following images provides the onboarding flow and usage of the Arlo Wire-Free Outdoor Siren.
Wire-Free Outdoor Siren – Onboarding
- From Arlo Secure App Device Select the “+”
- Select “Security System” “Wire-Free Outdoor Siren”
- Follow the guided on screen to advanced through the onboarding flow
- Continue to follow the onboarding flow
- Continue to follow the onboarding flow
- Continue to follow the onboarding flow – Testing Siren/Strobe Light On/Off
- Onboarding Successfully
Wire-Free Outdoor Siren – Audio and Strobe Light Settings
-
Wire-Free Outdoor Siren device setting, there are three options;
• Siren (Sound) Only
• Strobe Light Only
• Both Siren (Sound) and Strobe Light On -
User is able to select the Siren duration
Wire-Free Outdoor Siren – Activate the Siren/Strobe
- To deactivate the siren/strobe light, under the Device/Dashboard find the Siren card tap on the siren button
- Siren will deactivate with icon will not be in red
Wire-Free Outdoor Siren – Deactivate the Siren/Strobe
- To activate the siren/strobe light, under the Device/Dashboard find the Siren card tap on the siren button
- Swipe to sound the siren (sound).
- Siren is active with red icon showing
Federal Communication Commission Interference Statement:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible
for compliance could void your authority to operate the equipment.
RF exposure statements
This Transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 centimeters between the radiator and your body or
nearby persons.
Industry Canada statement:
This device complies with Industry Canada license-exempt RSSs. Operation is
subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Date: 2023/2/13
Documents / Resources
| arlo
Wire-Free Outdoor Siren
App
[pdf] Installation Guide
2APLE18300420, Wire-Free Outdoor Siren App, Outdoor Siren App, Siren App, App
---|---