Motionflow UM A1 C 16 Inch 1 Steam Cleaner User Manual

Motionflow UM A1 C 16 Inch 1 Steam Cleaner

Introduction

Thank you for choosing Motionflow steam mop. At Motionflow we strive to bring the best home cleaning experience through our products and services. The Motionflow steam mop is a remarkable solution for deep steam cleaning. With our adjustable attach­ments, you can use it not only as a steam mop but as a multi-func­tion steam cleaner, capable of cleaning hard floors, tiles, and windows; removing grease off kitchen stoves, range hood and tables; clearing stains from bathtubs, toilet seats, fittings and much more.
This User Manual aims to provide you with guidelines on how to operate your Motionflow steam mop and important safety instruc­tions. Any use that does not conform to the guidelines described in this manual may void the limited warranty. Please read the com­plete instructions carefully before using the appliance and retain it for future reference.
Once again thank you for being a valued Motionflow customer.
Your Sincerely MotionflowTeam

Warning

Please read all instructions and safety warnings carefully before using your Motionflow steam mop. If you give this product to others, please remember to give them these instructions as well.

A WARNING: To reduce the risk of danger to children and people with restricted capabilities:

• Do not allow children to use this steam mop. Children must not be allowed to play with the appliance.
• Keep children away while you are operating the steam mop and when leaving the appliance to cool down after use.
• Keep all packaging material out of reach of children to avoid the danger of suffocation.
• When disposing the steam mop, safely cut the main cable to ensure that it can no longer be used.
• This steam mop may be used by persons with reduced physical, sensory or mental capacities, provided they are supervised or have been trained in the safe use of the appliance and under­stand the potential danger.
• A WARNING: To reduce the risk of fire or electric shock:
• It is not recommended to use an extension cord with this steam mop.
• Do not immerse this steam mop in water as this could result in electric shock.
• Do not fill more than 8.5 fl. oz (250 ml) of water into the water tank. If water accidentally has run down the steam mop while the tank is being filled, the steam mop must not be connected to power until it is completely dry.
• Do not touch the appliance with wet hands and do not operate it outdoors or in rooms with high humidity.
• Do not leave the steam mop unattended when plugged in.
• Do not fill the water tank when plugged in.• Do not clean the steam mop or replace the attachments when plugged in.
• Do not pull or carry by cord or pull the cord around sharp edges or corners.
• Only connect the steam mop to a properly installed, earthed wall socket that complies with the Technical Specifications (See Page 74) of the appli-ance.
• Always unplug the steam mop after use.
• Do not direct steam or water at appliances containing electrical compo-nents, for example, inside an oven.
• Do not use with damaged cord or plug. If the steam mop is not working as it should or has been dropped, damaged, left outdoors, or dropped into water, do not attempt to repair the steam mop by yourself. Please contact our customer service: Incorrect reassembly or repair may cause a risk of electrical shock or injury.
• A WARNING: The steam emitted from the steam mop is very hot and may cause scalding. Please use caution when using the steam mop. To reduce the risk of scalds and burns:
• Do not touch any of the attachments while the steam mop is in use.
• Do not direct the steam at people, animals, plants or delicate objects.
• Do not put hands or feet under the steam mop.
• Do not use the steam mop without water in the tank.
• Do not touch hot surfaces of the steam mop during operation.
• Do not cover the hot steam mop. Keep the hot steam mop away from curtains, blankets and other flammable or heat sensitive materials.
• The steam mop is very hot after use. Allow it to cool down for 75 minutes and use caution when emptying the water tank and removing the attach-ments.
• Only store away the appliance after it has cooled off completely. Always empty the water tank before storing the appliance away.
• A WARNING: To reduce the risk of injury and material damage:
• Do not add cleaning detergents, solutions, alcohol, fragrances, oil, or any other chemicals to the water used in the steam mop as it may damage the product and make it unsafe to use.
• Do not use the metal brush on delicate surfaces.
• Only use tap water or distilled water to fill the tank.
• Only use the accessories supplied.· Do not use on leather, wax-polished furniture, synthetic fabrics, velvet, or other delicate, steam-sensitive materials.
• Do not use on unsealed wood or unglazed ceramic floors. The hot steam may remove the sheen on surfaces that have been treated with wax, and occasionally on some wax-free floors.
• Always test treat terracotta floors, wood floors and similar materi­als on an inconspicuous part of the material in order to deter­mine whether it is suitable for steam cleaning. If necessary, consult the manufacturer of the material you wish to clean.
• Do not expose the appliance to extreme sunlight, frost, rain, or snow.
• Store the steam cleaner in a cool, dry location. Do not store the appliance in the vicinity of gas or electric cookers, heaters or ovens.

Parts and Attachments

1. Steamer Main Body
2. Extension Rod
3. Mop Head
4. Microfiber Pad
5. Jet Nozzle
6. Class Squeegee
7. Sponge Head
8. Grout Brush
9. Metal Brush x2
10. Nylon Brush x 2
11. Measuring Cup
12. User Manual
13. Carpet Slider
14. Storage Bag
15. Triangle Sponge Head
16. Angle adapter
17. Triangle Steam Brush
18. Multi-functional Brush
19. Microfiber Bonnet
20. Scraper

ASSEMBLE YOUR STEAM MOP

STEAMER MAIN BODY

Steamer main body is the critical component that generates steam when connected to power. It has a water tank, power cord, control button, indicator lights, handle, steam pipe, and a steam generation system inside. Attachments will be connected to the steamer main body to serve various cleaning purposes.

EXTENSION ROD

• Before using your steam mop, connect the steamer main body to the extension rod.
• Align the extension rod with the steamer main body nozzle.
• Press down the release button on the steamer main body and slide the extension rod onto the steam outlet until you hear anc feel the release button click into place.
  

MOP HEAD:

• Connect the mop head onto the other end of the extension rod.
• Align the mop head with the end of the extension rod.
• Press down the release button on the extension rod and slide the mop head onto the extension rod until you hear and feel the release button click into place.

MICROFIBER PADS:

• Microfiber pads are machine washable and safe for virtually all hard floor surfaces.
• Place one microfiber pad on a flat surface with the white side facing up.
• Match the mop head with microfiber pad in the orientation shown below. Press down on the microfiber pad using the mop head, and the microfiber pad will adhere to the mop head.

NOTE: Microfiber pads are reusable. Hand wash or machine wash the microfiber pads after use. Do not use bleach, powdered detergent, or fabric softeners as they may damage or leave a coating on the microfiber pads that will reduce cleaning perfor- mance and absorbency. Microfiber pads should be line-dried or tumble-dried on a low setting, as this will extend the life of the microfiber fabric. We recommend replacing your microfiber pads every 3 to 4 months. You may purchase replacement pads and other accessories through Motionflow.

JET NOZZLE

• Jet nozzle is for hard-to-reach areas and is used as an extension for brushes and other attachments.

• Align the jet nozzle with the steamer main body nozzle. Press down the release button on the steamer main body nozzle and slide the jet nozzle onto the steamer main body until you hear and feel the release button click into place.

• To remove the jet nozzle, press down the release button on the steamer main body nozzle, rotate the jet nozzle slightly, and then pull the jet nozzle off completely.

• CLASS SQUEEGEE Class squeegee is for cleaning smooth surfaces, for exam-ple, mirrors, windows, showers, etc.

• SPONGE HEAD Sponge head is for cleaning surfaces with grease or sticky liquids, for example, kitchen table, countertop, water sink, etc.

• GROUT BRUSH Crout brush is for cleaning narrow surfaces, for example, corners, tile floor grout, etc.

• METAL BRUSH Metal brush is for cleaning robust surfaces, for example, dirty grills, patio tiles, etc.

• NYLON BRUSH Nylon brush is for removing stubborn dirt and stains on, for example, water taps, bathroom fittings, hubcaps, etc.

To Connect these Attachments:

• Align your selected attachment with the jet nozzle tip.

• Firmly push it down as far as it will go to prevent steam leakage.

• To remove the attachment, grab the attachment firmly and pull vit off the jet nozzle.
  CAUTION: The steam mop is still very hot after use. Allow it to cool down before removing the extension rod or any attachments used.

• MEASURING CUP Use the measuring cup to pour water into the water tank. When filling the water tank, be sure to limit the maximum volume to 8.5 fl. Oz. (250ml) to avoid spilling.

• CARPET SLIDER For optimal cleaning of your carpets The Storage Bag can store accessories together after cleaning work finished.

• TRIANGLE SPONGE HEAD Same as the sponge head, only triangle design for corner cleaning

• ANGLE ADAPTER The Angled Nozzle connects to the Steam Jet Nozzle, is designed for steam cleaning into some narrow, curved and dusty corners.

• TRIANGLE STEAM BRUSH The Triangle Steam Brush connect to the Aluminum Pole, providing extra scrubbing power for removing dirty

• MULTI-FUNCTIONAL BRUSH The Multi-functional Brush is for ironing function and other fabric cleaning function.

• MICROFIBER BONNET The Microfiber bonnet could be used with the triangle Steam Brush, to clean the leather or fabric surface.

• SCRAPER The Scrapper connects to the Aluminum Pole, and is designed for steam cleaning stubborn and dry stains.

OPERATE YOUR STEAM MOP

UNPACKING

Remove the steam mop and accessories from the package. Ensure all parts are present and show no sign of damage.

Filling the Water Tank:

• Hold the steam mop to the upright position, then open the water tank lid.
• The maximum water capacity of the water tank is 8.5 fl. oz. (250ml). The measuring cup has water volume marks on the side. Fill the measuring cup with tap water or distilled water no more than 8.5 fl. oz. (250ml).
• Carefully pour water from the mea- suring cup to the water tank. Do not overfill.
• Push the water tank lid firmly back onto the tank to ensure there is no water leak.

CAUTION:

• Ensure the steam mop is powered off and the power cord is unplugged when filling water. If the steam mop has been in-use, allow the unit to cool down for 15 minutes before refilling.
• Failure to do so may result in burns from escaping steam.

CAUTION: When filling water to the water tank, always use the measuring cup so to prevent water spilling onto the steam mop, which may cause damage to electrical components.

USING YOUR STEAM MOP

• When the water tank is filled and the selected attachment is connected, plug the power cord into an electrical outlet.
• Once powered on, the steam mop heating system immediately starts heating up. The 3 indicator lights light up and then go out one after another indicating the device is heating up.
• After approximately 15 seconds, the steam mop is heated up, 2 indicator lights flash, indicating the device is ready to use.

Press the control button to begin using the steam mop. There are three steam levels.

• Minimum level: One indicator light
• Middle level: Two indicator lights

Maximum level: Three indicator lights

• Press the control button to change to the desired steam level.
• To stop the steam, hold the control button for 2-3 seconds until steam go out, but the heating system is still heating up.
• To power off the steam mop,unplug the power cord.

CAUTION: Do not leave the steam mop unattended when plugged in. The steam mop will remain heating when the power cord is plugged in. There-fore, to power off the steam mop completely, unplug the power cord.

CLEAN & MAINTAIN YOUR STEAM MOP

CAUTION: When cleaning or maintaining your steam mop, ensure the power cord is always unplugged.

• HANDLING:
  • Allow the steam mop to cool down for at least 15 minutes before handling.
  • Press and hold the steam button to release all remaining pressure.
  • Remove all attachments from the steamer main body and store it properly.
• CLEANING:
  • Rinse out the water tank once a month with water to remove any limes-cale deposits.
  • Wipe down the appliance, as required, using a damp cloth.
  • Clean the attachments regularly to keep them sanitized.
  • Clean the steam outlet nozzle with a needle, if limescale deposits accumulate.
• STORING:
  • Store the steam mop and attachments in a cool, dry location. Avoid leaving it in the vicinity of gas or electric cookers, heaters or ovens.
  • Leave the lid of the water tank open.

TECHNICAL SPECIFICATIONS

TROUBLESHOOTING

WARRANTY AND CUSTOMER SERVICE

Motionflow warrants to the original retail purchaser that Motionflow steam mop will be free from defects in material and workmanship for one year from the date of original purchase. This warranty applies to product used for personal purposes, and not tor commercial or rental purposes. To receive warranty service, the original customer purchaser should contact Motionflow customer service for immediate assistance. Proof of purchase in the form of a bill of sale or receipt invoice, indicating that the steam mop is within the warranty period, must be presented in order to obtain the requested services. In accordance with applicable law, Motionflow may request you to provide additional documents before receiving warranty serivce. Please contact Motionflow customer serivce for more details: Motionflowcare@Motionflowtech.com. Please be aware the shipping expenses to return the product to Motionflow servicing address are not covered by this warranty and must be paid by the customer.

EXCEPTIONS AND EXCLUSIONS

If a hardware defect arises and a valid claim is received within the warranty period, Motionflow, at its sole option and to the extent permitted by law, will either a) repair the defect at no charge, using new or refurbished replace- ment parts, b) exchange the product with a product that is new or which has been manufactured from new or serviceable used parts and is at least functionally equivalent to the original device, or c) refund the purchase price of the product.

A replacement product or part thereof shall enjoy the warranty of the original product for the remainder of the warranty period, or 90 days from the date of replacement or repair, whichever provides you longer protection. Refunds can only be given if the original product is returned.

THIS WARRANTY DOES NOT APPLY TO:

• Any non-Motionflow steam mop product or accessories even if packaged or sold with the product;
• Damage caused by use with non-Motionflow steam mop product or accessories;
• Damage caused by accident, abuse, misuse, flood, fire, earth- quake, or other external causes;
• Damage cause by operating the product outside permitted or intended uses;
• Damage cause by modifying the product or parts;
• Consumable parts, such as batteries, fuses, and lights;
• Cosmetic damage.

This warranty is only valid in the country where it is purchased and only applies to product purchased in that country.

www.qumaxbrands.nl/reviews

SUPPORT@QUMAXBRANDS.NL

WWW.QUMAXBRANDS.NL

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>