Boosjet 713cc XP23HPE Sewer Jetter Instruction Manual
- June 12, 2024
- Boosjet
Table of Contents
Boosjet 713cc XP23HPE Sewer Jetter
Starting Instructions
-
Make sure to check the engine oil level before each use. See engine manual for type and amount.
-
Do not run the pump dry. Be sure to attach and turn on the water to your pump prior to starting.
-
Be sure you fuel tanks quick connect fittings are completely seated and secure.
-
Push the throttle lever up all the way (full Throttle) towards the pump. See image 1.
FULL THROTTLE -
Pull the choke lever out and Hold. The choke lever may retract during starting if not held out. See image 2.
FULL CHOKE & HOLD -
Turn the key to start engine. If engine is cold, new, or has been run out of fuel, it may take a few 5-7 second cranking cycles to get the fuel to the top of the engine and start up. See image 3.
START -
Once engine has started push choke lever back in.
-
Allow engine to run full throttle for 15-20 seconds, then you can set to desired throttle position.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>