AREBOS AR-HE-LZTV55W Air Circulator Fan User Manual

User’s Manual – AREBOS 3D Table Fan 55W
3D Table Fan 55W
AR-HE-LZTV55W

Please follow all security measures in this user´s manual to ensure a secure use .
Thank you for purchasing our product. Please read the operating instructions carefully before using the product for the first time. If you give the product to third parties, these operating instructions must be provided with.

Safety instructions

1.1 Explanation of the symbols

| By means of a CE marking, it can be recognized that a product complies with the legal provisions of European legal standards and therefore may be traded within the European Community.
---|---
| Warning! Read the safety instructions carefully. Failure to follow the safety precautions could result in serious injury or damage. Keep the operating instructions in a safe place.
| Be careful when using this product.
| Warning of electrical voltage!
| Note: Pull out mains plug!
| This product must not be disposed of with household waste!
****| Protected housing (protection class II)!

Warning! Do not put fingers and other limbs in the fan housing!
1.2 General safety instructions

• Read the instructions carefully. It contains important instructions for the use, safety and maintenance of the device. It should be stored carefully and, if necessary, passed on to subsequent users.
• The device may only be used for the intended purpose, in accordance with these instructions for use.
• This device may be used by children 8 years old and over, and by persons with reduced physical, sensory or mental abilities, or lack of experience and knowledge, if they have been supervised or instructed in the safe device and understand the hazards arising therefrom.
• Keep the device and its supply out of the reach of children under 8 years of age.
• Children are not allowed to play with the device.
• Cleaning and user maintenance must not be performed by children without supervision.
• Turn off the device before disconnecting it from the power supply.
• If the power cord of this equipment is damaged, it must be replaced by the manufacturer’s centralized service department or a similarly qualified person. Improper repairs can cause significant risks for the user.
• Before commissioning, check the device and its connecting cable and accessories for damage.
• Do not use the device if it has visible damage.
• Before connecting to the power supply, make sure that the voltage indicated on the rating plate matches the voltage of your power outlet. Use only sockets with protective contact.
• Do not crush the connecting cable, do not pull it over sharp edges or hot surfaces. Do not use the connecting cable for carrying.
• If the power cord of this equipment is damaged, it must be replaced by the manufacturer or a similarly qualified person to avoid hazards.
• Disconnect the mains plug of the device after each use, in case of faults during operation and before every cleaning of the device.
• Never disconnect the plug from the power cord or with wet hands.
• Never use the device after a malfunction, e.g. if the device has fallen into the water or has fallen or been damaged in any other way.
• The manufacturer assumes no responsibility for incorrect use, which results from nonobservance of the instructions for use.
• Modifications of the product will affect product safety.
• All modifications and repairs to the device or accessories may only be carried out by the manufacturer or persons expressly authorized by the manufacturer.
• Make sure that the product is operated from a power outlet that is easily accessible so you can quickly unplug the unit in case of an emergency.
• If possible, do not use extension cords. If this is unavoidable, use only GS-approved, splashproof, simple extension cords (not multi-outlet) designed to handle the power consumption of the unit.
• To avoid a dangerous electric shock, never splash or pour water on the device.

1.3 Specific safety instructions

• The device is intended for household or similar use only. It may not be used for commercial purposes!

• Please use the product only in its intended manner.

• Any other use may result in damage to the product or the environment of the product.

• The device is only suitable for indoor use.

• Make sure that the device has good stability during operation and that the power cable does not become a hindrance or tripping hazard.

• The device must be placed on a firm and dry surface during use, such as to stand at a table. Do not place the fan on an unstable or textile-covered surface. Make sure that the device is stable so that nobody can knock it over. Around the device, a space of about 50 cm should remain free.

• Never use the ventilator near a table edge, making sure it is out of the reach of children and pets to prevent the unit from being pulled down and being damaged.

• Do not let the power cord hang over the edges of the table so that it cannot be pulled down. Be careful not to cover it with hot surfaces, such as a stove or a radiator or comes into contact with the device itself. Always unwind the cable completely before plugging in the mains plug.

• Keep the device away from hot gas, hot ovens or other heat-emitting devices or heat sources. Never use the appliance on a wet or hot surface. Do not place the device near humidity, heat and open flames. Keep the device away from moving parts or devices.
  • Do not use the device in rooms containing explosive or flammable substances or liquids. Do not use the fan in rooms with high humidity, at room temperatures over 40 ° C or in dusty rooms.

• Do not leave loose, small or light objects near the unit. These can be sucked into the interior of the device.

• The device must not be used in the bathroom.

• Do not allow the cool air to blow you directly and do not let the air in the room get too cold. Malaise and health damage can be caused.

• Do not place plants or animals directly in the cool air stream. Animals and plants can suffer from the cool air flow.

• Never block the air intake or exhaust. Do not operate the device covered.

• Only operate with completely unrolled cable!

• Never use the device without a protective grille.

• Keep the device away from TV and radio equipment to avoid electromagnetic interference.

• Do not touch the device or the control panel with wet or damp hands.

Use

• Place the fan on a flat, even surface.
• Connect the fan to the power supply.
• Press the ON/OFF button on the remote control or control panel to turn on the fan.

2.1 Control panel

Select blower level

• Press the +/- button to switch to the desired fan speed (1-4). The LED lamp of the corresponding stage lights up.

Mode button

• Press the mode button and you can choose between sleep mode (gentle ventilation) and “storm” mode (highest level).

Set Timer

• Press the timer button to set the timer in hours (1 → 2 → 3 → 4 → 5 → 6 → 7 → off). The LEDs of the corresponding number of hours light up.
  Timer| 1 hr-LED| 2 hr-LED| 4 hr-LED
  ---|---|---|---
  1 hour| ON| OFF| OFF
  2 hours| OFF| ON| OFF
  3 hours| ON| ON| OFF
  4 hours| OFF| OFF| ON
  5 hours| ON| OFF| ON
  6 hours| OFF| ON| ON
  7 hours| ON| ON| ON
  OFF| OFF| OFF| OFF

Tilt angle

• Press the tilt angle button to tilt the fan head. The fan head moves from top to bottom and back again until you stop it by pressing the button again. He then stops in the stopped position.

Oscillation

• Press the oscillation button on the remote control or control panel to swivel the fan head.
  The fan head moves from right to left and back again until you stop it by pressing the button again. He then stops in the stopped position.

Turning off

• Press the ON/OFF button on the remote control or control panel to put the fan into standby mode. Disconnect the power plug from the power supply to turn off the fan.

2.2 Remote control

• The same symbols and symbol descriptions apply to the remote control.

Technical data

Cleaning and maintenance

• Clean the fan regularly.
• Never immerse the cable and the device in water or rinse under running water.
• Warning: Always disconnect the device from the power before moving or cleaning it.
• Disconnect power and wait for the fan to stop before cleaning.
• Clean the guard with a vacuum cleaner of dust and other debris.
• Use a damp cloth to clean the surface of the device.
• The following agents should not be used for cleaning: petrol, paint thinner or other chemicals.
• Allow the fan to dry completely before using it again.
• Leave the fan completely assembled for storage.
• Keep the fan in a cool, dry and safe place away from children and animals when not using the fan for a long time. The device must not be stored in a hot location or under direct sunlight.
• At best, store the fan in its original packaging.

Disposal instruction

5.1 Disposal of the packaging

• Please make reference to the guidelines and standards for appropriate disposal of the packaging valid in your region. In part, the package may consist of plastic bags – watch this respect, with special care to ensure that this is not out of the reach of children. There is a risk of suffocation!

5.2 Disposal of waste equipment

• Equipment must be disposed of in accordance with the rules and regulations of the local waste disposal.

5.3 Meaning of the “dustbin”
**** Protect our environment; electrical appliances do not belong in household waste. Use the provided for the disposal of electrical equipment collection points and enter your electrical and electronic equipment that you no longer use. They help ensure that the potential effects of incorrect disposal on the environment and human health to be avoided. So, do your part to recycle, recycling and other forms of recovery of waste electrical and electronic equipment. Information on where the devices are disposed of, please contact your local authorities or local Governments.
Our customer service number: +49 (0) 931-45232700
Canbolat Vertriebs GmbH Gneisenaustraße 10-11 97074 Würzburg

EU Declaration of Conformity

We, the
Canbolat Vertriebs GmbH, Gneisenaustraße 10-11, 97074 Würzburg, Germany Hereby declare that the devices described in the following comply with the relevant, fundamental safety and health requirements of the EU directives due to their design and construction as well as in the versions marketed by us.
Product name: AREBOS 3D Table Fan 55W
Article number: 4260627421473
Model number: AR-HE-LZTV55W
If the device is modified without our consent, this declaration of conformity loses its validity.
Tested according to:
2014/35/EU
2014/30/EU
Date/Signature Manufacturer/Location:
Würzburg, 12.12.2019

Signature:
Dipl.-Inform. (Univ.) Korhan Canbolat, Managing Director
Representative of this User Manual/Technical Data:
Dipl.-Inform. (Univ.) Korhan Canbolat, Managing Director Office address:
Canbolat Vertriebs GmbH
Gneisenaustraße 10-11
97074 Würzburg
You can find the return address in the imprint: https://www.arebos.de/impressum/
VAT identification number: DE 263752326
The court of entry in the commercial register is Würzburg, HRB 10082 WEEE- Reg.-Nr. DE 61617071

References

• Impressum

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>