Schneider Electric VW3A1111 Graphic Display Terminal User Guide
- June 4, 2024
- Schneider Electric
Table of Contents
Schneider Electric VW3A1111 Graphic Display Terminal
OVERVIEW
- STOP RESET: Stop the command/ apply a Fault Reset.
- LOCALI REMOTE: used to switch between local and remote control of the drive
- ESC: used to quit a menu/parameter or remove the current)y displayed value in order to revert to the previous value retained in the memory
- F1to F4: function keys used to access drive id, QR code, quick view, and submenus. Simultaneous press of F1 and F4 keys generates a screenshot file in the Graphic Display Terminal internal memory.
- Graphic display.
- Home: used to access directly at the home page.
- Information: used to have more information about menus, submenus, and parameters. The selected parameter or menu code is displayed on the first line of the information page.
- RUN: executes the function assuming it has been configured.
- Touch wheel /OK: used to save the current value or access the selected menu/parameter. The touch wheel is used to scroll fast into the menus. Up/down arrows are used for precise selections, rightleft arows are used to select digits when setting a numerical value of a parameter.
-
To check the Drive Identification using the VW3A1111 keypad, Press the Home button or the ESC button (may require several presses) until you reach the Main Menu:
-
Press the F1 function key (left most function key, display shows Drive ID directly above this button) to enter this menu:
- Part number
- kW/HP rating
- Voltage rating
- Application version
- Motor control version
-
Scroll using the up and down arrows on the keypad to view the information available.
-
Motor control version
-
Embedded Ethernet version
-
CPLD version
-
PWR board version
-
First half of Serial number
-
First half of Serial number
-
Second half of Serial number
-
Product Version
-
Option card 1 information (if installed)
-
Option card 2 information (if installed)
-
Braking Unit information (if installed)
-
Keypad version
-
Keypad serial number
-
Press the Home button or press ESC to return to the normal screens.