hansgrohe Vernis Shape 70 Washbasin Mixers Instruction Manual
- June 12, 2024
- hansgrohe
Table of Contents
Instructions for use / Assembly instructions
Vernis Shape 70
71560XXX / 71566000 / 71567XXX /71596000
Vernis Shape 70 CoolStart
71593XXX / 71535004
Vernis Shape 100
71561XXX / 71568000 / 71569XXX /71597000
Vernis Shape 100 CoolStart
71594XXX
Vernis Shape
71211XXX / 71219XXX
Safety Notes
Gloves should be worn during installation to prevent crushing and cutting injuries.
The product may only be used for bathing, hygienic and body cleaning purposes.
The hot and cold supplies must be of equal pressures.
Installation Instructions
- Prior to installation, inspect the product for transport damages. After it has been installed, no transport or surface damage will be honoured.
- The pipes and the fixture must be installed, flushed and tested as per the applicable standards.
- The plumbing codes applicable in the respective countries must be observed.
- The drain valve must only be used as intended. It is not allowed to attach other objects to the drain valve, for example a semi-pedestal.
- If the instantaneous water heater causes problems or if you wish to increase the water flow, the EcoSmarte® (flow limiter) located behind the aerator can be removed.
Technical Data
This mixer series-produced with EcoSmart® (flow limiter)
| Operating pressure: | max. 1 MPa |
|---|---|
| Recommended operating pressure: | 0,1 – 0,5 MPa |
| Test pressure: | 1,6 MPa (1 MPa = 10 bar = 147 PSI) |
| Hot water temperature: | max. 60°C |
| Thermal disinfection: | 70°C / 4 min |
The product is exclusively designed for drinking water!
Do not use silicone containing acetic acid!
Adjustment (see page 37)
To adjust the hot water limiter. Using a hot water limiter in combination with
a continuous flow water heater is not recommended.
Dimensions (see page 41)
Flow diagram (see page 42)
Spare parts (see page 39)
XXX = Colors
000 = Chrome Plated
670 = Matt Black
Special accessories (order as an extra)
• special tool #58085000 (see page 33)
• Installation putty (see page 34)
Cleaning (see page 38)
Operation (see page 42)
• Hansgrohe recommends not to use as drinking water the first half liter of
water drawn in the morning or after a prolonged period of non-use.
• After periods of prolonged non-use, but at least every third day, the
fittings must be opened with the handle in hot and cold position to prevent
stagnation in the connecting lines. Let the water run until the water
temperature is constant.
Test certificate (see page 44)
|
---|---
|
www.hansgrohe.com/cleaning-recommendation
Cleaning recommendation / Warranty / Contact
Vernis Shape 70
71560XXX / 71566000 / 71567XXX / 71596000
Vernis Shape 70 CoolStart
71593XXX / 71535004
Vernis Shape 100
71561XXX / 71568000 / 71569XXX / 71597000
Vernis Shape 100 CoolStart
71594XXX
Vernis Shape
71211XXX / 71219XXX
| 71560XXX | PA-IX 29967/IO | DM0446 | X |
|---|---|---|---|
| 71561XXX | PA-IX 38003/IO | DM0446 | X |
| 71566000 | PA-IX 38007/IO | DM0446 | X |
| 71567XXX | PA-IX 38007/IO | DM0446 | X |
| 71568000 | PA-IX 38008/IO | DM0446 | X |
| 71569XXX | PA-IX 38008/IO | DM0446 | X |
| 71593XXX | PA-IX 38133/IO | DM0446 | X |
| 71594000 | PA-IX 38134/IO | DM0446 | X |
| 71596000 | PA-IX 29967/IO | X | |
| 71597000 | X | ||
| 71211XXX | PA-IX 38143/IO | X | |
| 71219XXX | |||
| 71535004 |
Hansgrohe · Auestraße 5 – 9 · D-77761 Schiltach · Telefon +49 (0) 78
36/51-1282 · Telefax +49 (0) 7836/511440
E-Mail: info@hansgrohe.com · Internet:
www.hansgrohe.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>