hansgrohe Vernis Blend Series Basin Mixer Instruction Manual

hansgrohe Vernis Blend Series Basin Mixer

Safety Notes

Gloves should be worn during installation to prevent crushing and cutting injuries.
The product may only be used for bathing, hygienic and body cleaning purposes.
The hot and cold supplies must be of equal pressures.

Installation Instructions

• Prior to installation, inspect the product for transport damages. After it has been installed, no transport or surface damage will be honoured.
• The pipes and the fixture must be installed, flushed and tested as per the applicable standards.
• The plumbing codes applicable in the respective countries must be observed.
• The drain valve must only be used as intended. It is not allowed to attach other objects to the drain valve, for example a semi-pedestal.
• If the instantaneous water heater causes problems or if you wish to increase the water flow, the EcoSmart (flow limiter) located behind the aerator can be removed.

Technical Data

This mixer series-produced with EcoSmart (flow limiter)

Operating pressure: max. 1 MPa
Recommended operating pressure: 0,1 – 0,5 MPa
Test pressure: 1,6 MPa (1 MPa = 10 bar = 147 PSI)
Hot water temperature: max. 60°C
Thermal disinfection: 70°C / 4 min
The product is exclusively designed for drinking water!

Symbol description

• Do not use silicone containing acetic acid!

  ---

• Adjustment

• Dimensions

• Flow diagram

• Spare parts

• Special accessories

• special tool #58085000

• Installation putty

• seal #98996000

• Cleaning

• Operation

• Hansgrohe recommends not to use as drinking water the first half liter of water drawn in the morning or after a prolonged period of non-use.

• After periods of prolonged non-use, but at least every third day, the fittings must be opened with the handle in hot and cold position to prevent stagnation in the connecting lines. Let the water run until the water temperature is constant. Test certificate

• Test certificate
  

Assembly

Adjustment

Operation

Vernis Blend 70
71550XXX / 71557000 / 71558XXX /71570000 / 71587000
Vernis Blend 71210XXX / 71218XXX

open

Vernis Blend 100
71551XXX / 71559000 / 71580XXX / 71571000 / 71588000

close

cold

hot

Vernis Blend 70 CoolStart
71584XXX / 71534004

open

Vernis Blend 100 CoolStart
71585XXX

close

cold

hot

Spare parts

XXX = Colors
000 = Chrome Plated
670 = Matt Black

Vernis Blend 70
71550XXX / 71557000 / 71558XXX /71587000
Vernis Blend 100
71551XXX / 71559000 / 71580XXX /71588000

Vernis Blend 70 CoolStart
71584XXX / 71534004
Vernis Blend 100 CoolStart
71585XXX

Vernis Blend 70
71570000

Vernis Blend 100
71571000

Vernis Blend 70
71550XXX / 71557000 /71558XXX / 71587000

Vernis Blend 70 CoolStart
71584XXX / 71534004

Vernis Blend 100
71551XXX / 71559000 /71580XXX / 71588000
Vernis Blend 100 CoolStart
71585XXX

Vernis Blend 70
71550XXX / 71557000 /71558XXX / 71587000

Vernis Blend 70
71570000

Vernis Blend 100
71571000

Vernis Blend
71210XXX / 71218XXX

Vernis Blend 70
71550XXX / 71557000 / 71558XXX /71570000 / 71587000
Vernis Blend 100
71551XXX / 71559000 / 71571000 /71580XXX / 71588000
Vernis Blend
71210XXX / 71218XXX

Vernis Blend 70 CoolStart
71584XXX / 71534004

Vernis Blend 100 CoolStart
71585XXX

Flow diagram

Vernis Blend 70
71550XXX / 71557000 / 71558XXX /71570000 / 71587000
Vernis Blend 70 CoolStart
71584XXX / 71534004
Vernis Blend 100
71551XXX / 71559000 / 71571000 /71580XXX / 71588000
Vernis Blend 100 CoolStart
71585XXX
Vernis Blend
71210XXX / 71218XXX

Cleaning

www.hansgrohe.com/cleaning-recommendation

Cleaning recommendation / Warranty / Contact

| | |
---|---|---|---

Test certificate

| P-IX| DVGW| SINTEF| NF| | ETA|
---|---|---|---|---|---|---|---
71550XXX| PA-IX 29964/IO| DM0443| | X| X| |
71551XXX| PA-IX 29965/IO| DM0443| | | X| |
71557000| PA-IX 29966/IO| DM0443| | | X| |
71558XXX| PA-IX 29966/IO| DM0443| | | X| |
71559000| PA-IX 29970/IO| DM0443| | | X| |
71570000| PA-IX 38010/IO| | | | X| |
71571000| PA-IX 38009/IO| | | | X| |
71580XXX| PA-IX 38009/IO| DM0443| | | X| |
71584XXX| PA-IX 38000/IO| DM0443| | | X| |
71585XXX| PA-IX 38001/IO| DM0443| | | X| |
71587000| PA-IX 29964/IO| | | | X| |
71588000| PA-IX 29965/IO| | | | X| |
71210XXX| PA-IX 38143/IO| DM0447| | X| X| |
71218XXX| | | | | X| |
71534004| | | | | X| |

Vernis Blend 70
71550XXX /71587000

Vernis Blend 100
71551XXX /71588000

Vernis Blend 70
71557000 /71558XXX

Vernis Blend 100
71559000

Vernis Blend 70
71570000

Vernis Blend 100
71571000

Vernis Blend 100
71580XXX

Vernis Blend 70 CoolStart
71584XXX

Vernis Blend 100 CoolStart
71585XXX

Vernis Blend
71210XXX

Other Model

Vernis Blend 70
71550XXX / 71557000 / 71558XXX /71570000 / 71587000
Vernis Blend 70 CoolStart
71584XXX / 71534004
Vernis Blend 100
71551XXX / 71559000 / 71571000 /71580XXX / 71588000
Vernis Blend 100 CoolStart
71585XXX

Vernis Blend
71210XXX / 71218XXX

CUSTOMER SUPPORT

Hansgrohe · Auestraße 5 – 9 · D-77761 Schiltach · Telefon +49 (0) 78 36/51-1282 · Telefax +49 (0) 7836/511440
E-Mail: info@hansgrohe.com · Internet: www.hansgrohe.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>