Electrolux EGG64272K Gas Hob User Manual

Electrolux EGG64272K Gas Hob

Product Information

The EGG64272K, EGG64272M, and EGG64272W are hob models manufactured by Electrolux. These hobs are designed to provide professional experience and innovation to users. With a focus on safety and performance, these hobs are built to deliver great results every time they are used.

For more information, you can visit the Electrolux website at www.electrolux.com. On the website, you can find usage advice, brochures, troubleshooting guides, service and repair information, as well as register your product for better service. Additionally, you can purchase accessories, consumables, and original spare parts for your appliance through the Electrolux online shop.

When contacting the Electrolux Authorized Service Centre, make sure to have the following data available: Model, PNC (Product Number Code), and Serial Number. These details can be found on the rating plate of the appliance.

The product is subject to change without notice.

Product Usage Instructions

1. Safety Information: Before installing and using the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage resulting from improper use.
2. Safety Instructions: This appliance is suitable for the Italian market. Follow the safety instructions provided in the manual during installation and use.
3. Installation: Only a qualified person should install the appliance. Follow the installation instructions provided in the manual.
4. Electrical Connection: Ensure proper electrical connection to avoid the risk of fire and electric shock.
5. Gas Connection: When using a gas cylinder, keep it on a flat horizontal surface with the gas valve on top. Follow the gas connection instructions provided in the manual.
6. Use: Follow the usage instructions provided in the manual to avoid the risk of injury, burns, electric shock, fire, and explosion. Take necessary precautions while operating the appliance.
7. Care and Cleaning: Do not remove buttons, knobs, or gaskets from the control panel to prevent water damage. Follow the care and cleaning instructions provided in the manual.
8. Service: Refer to the service section of the manual for any servicing requirements.
9. Disposal: Dispose of the appliance according to local regulations to avoid the risk of injury or suffocation.
10. Gas Connection (Continued): Follow the gas connection instructions provided in the manual. Ensure compliance with regulations and recommended values for gas supply pressure.

WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
Welcome to Electrolux.

Visit our website to:

****Get usage advice, brochures, trouble shooter, service and repair information:www.electrolux.com/support
Register your product for better service: www.registerelectrolux.com
Buy Accessories, Consumables and Original spare parts for your appliance: www.electrolux.com/shop

CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorized Service Centre, ensure that you have the following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.

•  Warning / Caution-Safety information
• General information and tips
• Environmental information

Subject to change without notice.

SAFETY INFORMATION

Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

Children and vulnerable people safety

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
• Children aged from 3 to 8 years are allowed to load and unload the appliance provided that they have been properly instructed.
• This appliance may be used by persons with very extensive and complex disabilities provided that they have been properly instructed.
• Children of less than 3 years of age should be kept away from the appliance unless continuously supervised.
• Children should be supervised to ensure that they do not play with the appliance.
• Children shall not carry out cleaning and user maintenance of the appliance without supervision.
• Keep all packaging away from children and dispose of it appropriately.

General Safety

• This appliance is for cooking purposes only.
• This appliance is designed for single household domestic use in an indoor environment.
• This appliance may be used in, offices, hotel guest rooms, bed & breakfast guest rooms, farm guest houses and other similar accommodation where such use does not exceed (average) domestic usage levels.
• WARNING: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements.
• WARNING: Unattended cooking on a hob with fat or oil can be dangerous and may result in fire.
• Never use water to extinguish the cooking fire. Switch off the appliance and cover flames with e.g. a fire blanket or lid.
• WARNING: The appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by a utility.
• CAUTION: The cooking process has to be supervised. A short term cooking process has to be supervised continuously.
• WARNING: Danger of fire: Do not store items on the cooking surfaces.
• Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot.
• Do not use the appliance before installing it in the built-in structure.
• Do not use a steam cleaner to clean the appliance.
• After use, switch off the hob element by its control and do not rely on the pan detector.
• If the glass ceramic surface / glass surface is cracked, switch off the appliance and unplug it from the mains. In case the appliance is connected to the mains directly using junction box, remove the fuse to disconnect the appliance from power supply. In either case contact the Authorised Service Centre.
• If the supply cord is damaged, it must be replaced by the manufacturer, an authorized Service or similarly qualified persons in order to avoid a hazard.
• WARNING: Use only hob guards designed by the manufacturer of the cooking appliance or indicated by the manufacturer of the appliance in the instructions for use as suitable or hob guards incorporated in the appliance. The use of inappropriate guards can cause accidents.

SAFETY INSTRUCTIONS

This appliance is suitable for the following markets: IT

Installation

WARNING!
Only a qualified person must install this appliance.

WARNING!
Risk of injury or damage to the appliance.

• Remove all the packaging.
• Do not install or use a damaged appliance.
• Follow the installation instructions supplied with the appliance.
• Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.
• Seal the cut surfaces of the cabinet with a sealant to prevent moisture from causing swelling.
• Protect the bottom of the appliance from steam and moisture.
• Do not install the appliance next to a door or under a window. This prevents hot cookware from falling from the appliance when the door or the window is opened.
• Each appliance has cooling fans on the bottom.
• If the appliance is installed above a drawer:
  • Do not store any small pieces or sheets of paper that could be pulled in, as they can damage the cooling fans or impair the cooling system.
  • Keep a distance of minimum 2 cm between the bottom of the appliance and parts stored in the drawer.
• Remove any separator panels installed in the cabinet below the appliance.

Electrical connection

• WARNING!
  Risk of fire and electric shock.

• All electrical connections should be made by a qualified electrician.

• The appliance must be earthed if the symbol ( ) is not printed on the rating plate.

• Before carrying out any operation make sure that the appliance is disconnected from the power supply.

• Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply.

• Make sure the appliance is installed correctly. Loose and incorrect electricity mains cable or plug (if applicable) can make the terminal become too hot.

• Use the correct electricity mains cable.

• Do not let the electricity mains cable tangle.

• Make sure that a shock protection is installed.

• Use the strain relief clamp on the cable.

• Make sure the mains cable or plug (if applicable) does not touch the hot appliance or hot cookware, when you connect the appliance to a socket.

• Do not use multi-plug adapters and extension cables.

• Make sure not to cause damage to the mains plug (if applicable) or to the mains cable. Contact our Authorized Service Centre or an electrician to change a damaged mains cable.

• The shock protection of live and insulated parts must be fastened in such a way that it cannot be removed without tools.

• Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.

• If the mains socket is loose, do not connect the mains plug.

• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug. Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors.

• The electrical installation must have an isolation device which lets you disconnect the appliance from the mains at all poles.

Gas connection
CAUTION!
When using a gas cylinder, always keep it on a flat horizontal surface (with the gas valve on top).

• All gas connections must be made by a qualified person.
• Before installation, make sure that the local distribution conditions (nature of the gas and gas pressure) and the adjustment of the appliance are compatible.
• Make sure that there is air circulation around the appliance.
• The information about the gas supply is on the rating plate.
• This appliance is not connected to a device, which evacuates the products of combustion. Make sure to connect the appliance according to current installation regulations. Follow the requirements for adequate ventilation.

Use
WARNING!
Risk of injury, burns, electric shock .

CAUTION!
The use of a gas cooking appliance results in the production of heat, moisture and products of combustion in the room in which it is installed. Ensure that the kitchen is well ventilated especially when the appliance is in use. Prolonged intensive use of the appliance may require additional ventilation, for example the increasing of mechanical ventilation where present, additional ventilation to safely remove the products of combustion to outside (external) air whilst also providing room air changes with additional ventilation. Consult a qualified person before installation of the additional ventilation.

• Do not change the specification of this appliance.
• Remove all the packaging, labelling and protective film (if applicable) before first use.
• Make sure that the ventilation openings are not blocked.
• Do not let the appliance stay unattended during operation.
• Set the cooking zone to “off” after each use.
• Do not put cutlery or saucepan lids on the cooking zones. They can become hot. Do not operate the appliance with wet hands or when it has contact with water.
• Do not use the appliance as a work surface or as a storage surface.
• If the surface of the appliance is cracked, disconnect immediately the appliance from the power supply. This to prevent an electrical shock.
• Users with a pacemaker must keep a distance of minimum 30 cm from the induction cooking zones when the appliance is in operation.
• When you place food into hot oil, it may splash.

WARNING!
Risk of fire and explosion

• Fats and oil when heated can release flammable vapors. Keep flames or heated objects away from fats and oils when you cook with them.
• The vapors that very hot oil releases can cause spontaneous combustion.
• Used oil, that can contain food remnants, can cause fire at a lower temperature than oil used for the first time.
• Do not put flammable products or items that are wet with flammable products in, near or on the appliance.

WARNING!
Risk of damage to the appliance.

• Do not keep hot cookware on the control panel.

• Do not let cookware boil dry.

• Be careful not to let objects or cookware fall on the appliance. The surface can be damaged.

• Never leave a burner on with empty cookware or without cookware.

• Do not put aluminum foil on the appliance.

• Cookware made of cast iron, aluminum or with a damaged bottom can cause scratches on the glass /glass ceramic. Always lift these objects up when you have to move them on the cooking surface.

• Use only stable cookware with the correct shape and diameter larger than the dimensions of the burners.

• Make sure cookware is centrally positioned on the burners.

• Do not use large cookware that overlap the edges of the appliance. This can cause damage to the worktop surface.

• Make sure the flame does not go out when you quickly turn the knob from the maximum to the minimum position.

• Use only the accessories supplied with the appliance.

• Do not install a flame diffuser on the burner.
  Do not let acid liquids, for example vinegar, lemon juice or limescale remover, touch the hob. This can cause matt patches.

• Discoloration of the enamel or stainless steel has no effect on the performance of the appliance.

Care and cleaning

WARNING!
Do not remove the buttons, knobs or gaskets from the control panel. Water may get inside the appliance and cause damage.

• Clean the appliance regularly to prevent the deterioration of the surface material.
• Switch off the appliance and let it cool down before cleaning.
• Do not use water spray and steam to clean the appliance.
• Clean the appliance with a moist soft cloth. Use only neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects.
• Do not clean the burners in the dishwasher.

Service

• To repair the appliance contact the Authorized Service Centre. Use original spare parts only.

Disposal

WARNING!
Risk of injury or suffocation.

• Contact your municipal authority for information on how to dispose of the appliance.
• Disconnect the appliance from the mains supply.
• Cut off the mains electrical cable close to the appliance and dispose of it.
• Flat the external gas pipes.

Gas Connection

WARNING!
The following instructions about installation, maintenance and ventilation must be carried out by qualified personnel in compliance with the regulation in force (UNI-CIG 7129 – 7131). Make sure that the kitchen is well ventilated: keep natural ventilation holes open (at least 100 cm²) or install a mechanical extractor hood.
Choose fixed connections or use a flexible pipe in stainless steel in compliance with the regulation in force. If you use flexible metallic pipes, be careful they do not come in touch with mobile parts or they are not squeezed. Also be careful when the hob is put together with an oven.
Make sure that the gas supply pressure of the appliance obeys the recommended values.
If the supplied pressure has not the specified value, it is necessary to assemble a proper pressure regulator in compliance with the standard UNI EN 88. For Liquid Gas (LPG) the use of pressure regulator is allowed only if they are in compliance with UNI EN 12864. The adjustable connection is fixed to the comprehensive ramp by means of a threaded nut G 1/2″. Screw the parts without force, adjust the connection in the necessary direction and tighten everything.

• A. End of shaft with nut
• B. Washer supplied with the appliance
• C. Elbow supplied with the appliance

Rigid connection:
Carry out connection by using metal rigid pipes (copper with mechanical end) (UNI-CIG 7129).

Flexible connection:
Use a flexible pipe in stainless steel
(UNI-CIG 9891) with a maximum length 2 m.

WARNING!
When installation is complete, make sure that the seal of each pipe fitting is correct. Use a soapy solution, not a flame!

Injectors replacement

1. Remove the pan supports.
2. Remove the caps and crowns of the burner.
3. With a socket spanner 7 remove the injectors and replace them with the ones which are necessary for the type of gas you use (see table in “Technical Data” chapter).
4. Assemble the parts, follow the same procedure backwards.
5. Attach the label with the new type of gas supply near the gas supply pipe. You can find this label in the package supplied with the appliance.

If the supply gas pressure is changeable or different from the necessary pressure, you must fit an applicable pressure adjuster on the gas supply pipe.

Adjustment of minimum level
To adjust the minimum level of the burners:

1. Light the burner.

2. Turn the knob on the minimum position.

3. Remove the knob.

4. With a thin screwdriver, adjust the bypass screw position (A).

5. If you change:

6. from natural gas G20 20 mbar to liquid gas, fully tighten the bypass screw in.

7. from liquid gas to natural gas G20 20 mbar, undo the bypass screw approximately 1/4 of a turn.

WARNING!
Make sure the flame does not go out when you quickly turn the knob from the maximum position to the minimum position.

Electrical connection

• Make sure that the rated voltage and type of power on the rating plate agree with the voltage and the power of the local power supply.
• This appliance is supplied with a mains cable. It has to be supplied with a correct plug which can hold the load that the rating plate rates. Make sure that you install the plug in a correct socket.
• Always use a correctly installed shockproof socket.
• Make sure that there is an access to the mains plug after the installation.
• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
• There is a risk of fire when the appliance is in connection with an extension cable, an adapter or a multiple connection. Make sure that the ground connection agrees with the standards and regulations.
• Do not let the power cable to heat up to a temperature higher than 90° C.

To prevent contact between the cable and the appliance below the hob use the clamps which are on the side of the cabinet.

• A. Rigid copper pipe or flexible pipe of stainless steel

Connection cable
To replace the connection cable use only the special cable or its equivalent. The cable type is: H03V2V2-F T90.
Make sure that the cable section is applicable to the voltage and the working temperature. The yellow / green earth wire must be approximately 2 cm longer than the brown (or black) phase wire.

1. Connect the green and yellow (earth) wire to the terminal which is marked with the letter ‘E’, or the earth symbol , or closured green and yellow.
2. Connect the blue (neutral) wire to the terminal which is marked with the letter ‘N’ or clouded blue.
3. Connect the brown (live) wire to the terminal which is marked with the letter ‘L’. It must always be connected to the network phase.

Assembly

CAUTION!
Install the appliance only on a worktop with flat surface.

Installing hob under the hood
If you install the hob under a hood, please see the installation instructions of the hood for the minimum distance between the appliances.

Possibilities for insertion
The panel installed below the hob must be easy to remove and let an easy access in case a technical assistance intervention is necessary.

Kitchen unit with door

• A. Removable panel
• B. Space for connections

Kitchen unit with oven
The electrical connection of the hob and the oven must be installed separately for safety reasons and to let easy remove oven from the unit.

PRODUCT DESCRIPTION

Cooking surface layout

1. Rapid burner
2. Auxiliary burner
3. Semi-rapid burner
4. Control knobs

Control knob

DAILY USE

WARNING!
Refer to Safety chapters.

Burner overview

• A. Burner cap
• B. Burner crown
• C. Ignition candle
• D. Thermocouple

Ignition of the burner
Always light the burner before you put on the cookware.

WARNING!
Be very careful when you use open fire in the kitchen environment. The manufacturer declines any responsibility in case of the flame misuse.

1. Push the control knob down and turn it counterclockwise to the maximum gas supply position .
2. Keep the control knob pushed for equal or less than 10 seconds. This lets the thermocouple warm up. If not, the gas supply is interrupted.
3. Adjust the flame after it is regular.
   If after some tries the burner does not light, check if the crown and its cap are in correct positions.
   WARNING!
   Do not keep the control knob pushed for more than 15 seconds. If the burner does not light after 15 seconds, release the control knob, turn it into off position and try to light the burner again after minimum 1 minute.
   CAUTION!
   In the absence of electricity you can ignite the burner without electrical device; in this case approach the burner with a flame, turn the control knob counter-clockwise to maximum gas supply position and push it down. Keep the control knob pushed for equal or less than 10 seconds to let the thermocouple warm up.

HINTS AND TIPS

WARNING!
Refer to Safety chapters.

Cookware
CAUTION!
Do not use cast iron pans, clay or earthenware pots, grilling accessories or toaster plates.

WARNING!
Do not put the same pan on two burners.

WARNING!
Do not put unstable or damaged pots on the burner to prevent spills and injuries.
If the burner accidentally goes out, turn the control knob to the off position and try to light the burner again after minimum 1 minute.
The spark generator can start automatically when you switch on the mains, after installation or a power cut. It is normal.

Turning the burner off
To put the flame out, turn the knob to the off position .

WARNING!
Always turn the flame down or switch it off before you remove the pans from the burner.

CAUTION!
Make sure that the bottoms of pots do not stand too close to the control knob, otherwise the flame heats the control knob up.

CAUTION!
Make sure that pot handles are not above the front edge of the cooktop.

CAUTION!
Make sure that the pots are placed centrally on the burner in order to get the maximum stability and a lower gas consumption.

CAUTION!
Liquids spilt during cooking can cause the glass to break.

Diameters of cookware
CAUTION!
Use cookware with diameters applicable to the size of burners.

Suggested recipes

Food categoriesRecipes Snacks cooked withRoasting nutspan  DessertsCaramel

Pasta – Rice – other Cereals

| Mushrooms rice| Multi Crown| 1-5
Couscous| Rapid| 1-6
Ravioli| Auxiliary| 6-9

Soup – Legumes

| Vegetable soup| Semi-rapid| 2-7
Mushrooms and pota‐ toes soup| Semi-rapid| 1-5
Fish soup| Multi Crown| 1-4

Meat

| Beef meatballs| Multi Crown| 1-6
Fillet of pork roast| Multi Crown| 4-9
Beef burger gratin| Auxiliary| 1-5
Fish| Sepia with peas| Multi Crown| 1-5
Roasted tuna steak| Rapid| 5-8
Eggs based meals| Omelette| Multi Crown| 1-5

Vegetables

| Mushrooms with sea‐ sonings| Semi-rapid| 2-6
Caponata with vegeta‐ bles| Multi Crown| 4-8
Frozen spinach with butter| Rapid| 1-4
Fried dishes| French fries| Multi Crown| 5-9
Donuts| Multi Crown| 3-7
Burner type| Power level
Semi-rapid| 2-5
Croutons of bread| Multi Crown| 2-7
|
Pancakes| Semi-rapid| 3-9
Auxiliary| 1-5
Custard| Auxiliary| 1-5
Panna cotta| Auxiliary| 1-5

All recipes for approximately 4 portions.
The settings suggested in the cooking table should only serve as guidelines and be adjusted depending on the rawness of food, its weight and quantity as well as on the type of gas used and the material of the cookware used to prepare the dish.
For an optimal delicate cooking use the auxiliary burner.

CARE AND CLEANING

WARNING!
Refer to Safety chapters.

General information

• Clean the hob after each use.
• Always use cookware with a clean base.
• Scratches or dark stains on the surface have no effect on how the hob operates.
• Use a special cleaner suitable for the surface of the hob.

WARNING!
Do not use knives, scrapers or similar instruments to clean the surface of the glass or the rims of the burners and the frame (if applicable).

CAUTION!
Do not clean the burner crown with abrasive products, abrasive cleaning pads, solvents or metal objects. Burner crown may cause discoloration. Use only a moist soft cloth with neutral detergents.

• Wash stainless steel parts with water, and then dry them with a soft cloth.

Pan supports
The pan supports are not resistant to washing in a dishwasher. They must be washed by hand.

1. Remove the pan supports to easily clean the hob.
   Be very careful when you replace the pan supports to prevent the hob top from damage.

2. After you clean the pan supports, make sure that they are in correct positions.

3. For the burner to operate correctly, make sure that the arms of the pan supports are inserted in the recesses of the enameled plates.

Removing and assembling pan supports
After cleaning of the hob, make sure that pan supports are in a correct position. In order to place a pan support properly, make sure that its arms fits the cut-outs placed at the base of the burner as shown in the picture. This way, a pan support is stable and fixed.

Cleaning the hob

• Remove immediately: melted plastic, plastic foil, salt, sugar and food with sugar, otherwise, the dirt can cause damage to the hob. Take care to avoid burns.
• Remove when the hob is sufficiently cool: limescale rings, water rings, fat stains, shiny metallic discoloration. Clean the hob with a moist cloth and a non-abrasive detergent. After cleaning, wipe the hob dry with a soft cloth.
• To clean the enameled parts, caps and crowns, wash them with warm soapy water and dry them carefully before you put them back on.

Cleaning the spark plug
This feature is obtained through a ceramic ignition candle with a metal electrode. Keep these components well clean to prevent difficult lighting and check that the burner crown holes are not obstructed.

Periodic maintenance
Speak to your local Authorized Service Centre periodically to check the conditions of the gas supply pipe and the pressure adjuster, if fitted.

TROUBLESHOOTING

WARNING!
Refer to Safety chapters.

What to do if…

Problem| Possible cause| Remedy|
---|---|---|---
There is no spark when you try to activate the spark generator.| The hob is not connected to an electrical supply or it is connected incorrectly.| Check if the hob is correct‐ ly connected to the electri‐ cal supply.|
| Problem Possible cause| Remedy
| The fuse is blown.| Make sure that the fuse is the cause of the malfunc‐ tion. If the fuse is blown again and again, contact a qualified electrician.
| Burner cap and crown are placed incorrectly.| Place the burner cap and crown correctly.
| The flame extinguishes im‐ Thermocouple is not heat‐ mediately after ignition.         ed up sufficiently.| After lightning the flame, keep the knob pushed for equal or less than 10 sec‐ onds.
| The flame ring is uneven.      Burner crown is blocked with food residues.| Make sure that the injector is not blocked and the burner crown is clean.

If you cannot find a solution…
If you cannot find a solution to the problem yourself, contact your dealer or an Authorized Service Centre. Give the data from the rating plate. Make sure, you operated the hob correctly. If not the servicing by a service technician or dealer will not be free of charge, also during the warranty period. The information about guarantee period and Authorised Service Centres are in the guarantee booklet.

Labels supplied with the accessories bag
Stick the adhesive labels as indicated below:

• A. Stick it on Guarantee Card and send this part (if applicable).
• B. Stick it on Guarantee Card and keep this part (if applicable).
• C. Stick it on instruction booklet.

TECHNICAL DATA

Hob dimensions

Width                                                               590 mm

Depth                                                               520 mm

Bypass diameters

BURNER Ø BYPASS 1/100 mm

Rapid 52
Semi-rapid 35
Auxiliary 28

Other technical data

TOTAL POW‐ ER:

| Gas original:  G20 (2H) 20 mbar| 7,65 kW
---|---|---
Gas replace‐ ment:| G30 (3+) 28-30 mbar| 553 g/h
G31 (3+) 37 mbar| 543 g/h
Electric supply:| 220-240 V ~ 50-60 Hz|
Appliance cate‐ gory:| II2H3+|
Gas connec‐ tion:| G 1/2″|
Appliance class:| 3|

Gas burners for NATURAL GAS G20 20 mbar

BURNER NORMAL POWER MINIMUM POWER  INJECTOR MARK

kW kW

Rapid                         2,95                            0,75 119°
Semi-rapid                   1,85                            0,6 92
Auxiliary                    1,0                               0,33 70

Gas burners for LPG G30/G31 28-30/37 mbar

BURNER| NORMAL POWER

kW

| MINIMUM POWER

kW

| INJECTOR MARK| NOMINAL GAS FLOW g/h|
---|---|---|---|---|---
G30 28-30

mbar

| G31 37 mbar|
Rapid| 2,8| 0,95| 86| 204| 200|
| BURNER| NORMAL POWER kW| MINIMUM POWER kW| INJECTOR MARK| NOMINAL GAS FLOW g/h
| G30 28-30 mbar| G31 37 mbar
| Semi-rapid| 1,9| 0,6| 71| 138| 136
| Auxiliary| 1,0| 0,33| 50| 73| 71

ENERGY EFFICIENCY

Product Information

EN 30-2-1: Domestic cooking appliances burning gas
Part 2-1 : Rational use of energy – General

Energy saving
You can save energy during everyday cooking if you follow the hints below.

• When you heat up water, use only the amount you need.
• If it is possible, always put the lids on the cookware.
• Put the cookware directly in the center of the cooking zone.
• Use the residual heat to keep the food warm or to melt it.

ENVIRONMENTAL CONCERNS
Recycle materials with the symbol . Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.

www.electrolux.com/shop

References

• ser.no
• Il motore di ricerca per risparmiare sui tuoi acquisti | Trovaprezzi.it
• Buy Electrolux Spare Parts | Electrolux Australia
• Electrolux
• Register Your Appliance – Product Registration – Electrolux
• Electrolux EGG64272K | Confronta prezzi | Trovaprezzi.it
• Cucine e Piani cottura al miglior prezzo | Trovaprezzi.it

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>