LEA 1504D Power Cable User Manual
- June 12, 2024
- LEA
Table of Contents
LEA 1504D Power Cable User Manual
This document is intended to be used as a guide for proper wiring configuration in applications that need a custom length cable, or require the use of an alternate plug than the NEMA L6-30P supplied with the LEA Connect 1504/1504D power cable.
In applications where a different length cable is required, the powerCon 32A
connector can be removed from the supplied cable and installed onto a cable of
desired length. Below is an image showing the standard color codes for cables
in different regions of the world and which terminal postitions the wires
should be installed on the powerCon 32A connector.
The new cable must be a minimum of 10 AWG (6 mm²) to ensure it can carry the
maximum pottential current presented by the amplifier.
Recommended circuit breaker ampacity
To reduce the risk of tripping the circuit breaker on a branch circuit powering a single 1504 we recommend that the breakers listed below be used.
100VAC – 30 amps
120VAC – 30 amps
240VAC – 20amps (U.S.) 16amps (International)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>