OLP3120 Evolve EAL Series Area Light Shielding User Guide
- June 12, 2024
- EVOLVE
Table of Contents
OLP3120 Evolve EAL Series Area Light Shielding
Product Information:
The EAL Series Luminaires are designed to provide lighting solutions for challenging sites. The luminaires come with a variety of shielding options to meet different requirements.
Shielding Specification:
Within each shielding family, there are multiple cutoff levels categorized
by mounting height (MH) increments. The cutoff distance from the pole ranges
from 1MH to 2.5 MH in 0.5 MH increments. The shields listed in the user manual
are for the most common applications. For any specific needs not listed, it is
recommended to contact the manufacturer for further assistance.
Ordering Guide:
The user manual provides a list of shielded fixture examples along with
their corresponding optical codes. The shields listed on the page are all
BLACK in color.
Product Usage Instructions
To select the appropriate shield for your application, follow these steps:
- Determine the shield orientation based on the desired lighting direction (e.g., front, back, side).
- Identify the cutoff distance from the pole, ranging from 0.5 to 2.5 MH in 0.5 MH increments.
- Choose the fixture type based on the number of modules required (e.g., 1 module or 2 modules).
- Refer to the “Shield Order Logic” table to find the corresponding shield order code.
- Place an order with the manufacturer using the shield order code and specify the desired color (BLACK).
For any additional requirements or customization, it is recommended to contact the manufacturer for further assistance.
EAL Series Luminaires
Shielding Specification & Ordering Guide
The next evolution of the Evolve® LED Area Light delivers even better trespass control. Current’s exclusive reflective optical ring design produces superior vertical illuminace and efficiently directs the light without wasteful and unwelcomed light spill into neighboring properties. Due to the extensive variation of parking lot configurations coupled with tightening ordinances,Current now offers a full array of shielding to accommodate challenging sites.
The shielding options available for the Evolve® Area Light focus on the following applications:
- Left & Right Cutoff
- Front Cutoff
- Backlight Control & B-U-G Improvement
Within each of the shielding families, there are multiple shielding cutoff levels that are categorized in mounting height (MH) increments. Current accommodates cutoff distance from the pole from 1MH to 2.5 MH in 0.5 MH increments. The shields that are listed are for the most common applications. Please contact the manufacturer if your need is not listed.
All shields can be installed easily in the field. The next evolution of the Evolve® LED Area Light and shielding options will help you meet any parking lot challenge.
EAL SERIES SHIELDED FIXTURE EXAMPLES
EALS03
1 Module Optical Codes
C4, C3, C2
D4, D3, D2
F4, F3, F2
EALS03
2 Module Optical Codes
H4, H3, H2
J4, J3, J2
K4, K3, K2
C5, D5, F5, H5, J5, K5
EALP03
2 Module Optical Codes
J5, J4, J3, J2
K5, K4, K3, K2
L5, L4, L3, L2
M5, M4, M3, M2
N5, N4, N3, N2
P5, P4, P3, P2
Q5, Q4, Q3, Q2
TYPE AUTO SHIELDING
Shield Orientation| Cutoff Distance| Fixture Type| Shield
Order Logic
---|---|---|---
Back| Long| 2 Module| ELS-EAL-FBL-BLCK
TYPE V SHIELDING
Shield Orientation| Cutoff Distance| Fixture Type| Shield
Order Logic
---|---|---|---
Any Side
| 0.5| ****
2 Module (Symmetric Medium)
| ELS-EAL-MS1-BLCK
1| ELS-EAL-MS2-BLCK
1.5| ELS-EAL-MS3-BLCK
2| ELS-EAL-MS4-BLCK
2.5| ELS-EAL-MS5-BLCK
Any Side
| 0.5| ****
2 Module (Symmetric Wide)
| ELS-EAL-SS1-BLCK
1| ELS-EAL-SS2-BLCK
1.5| ELS-EAL-SS3-BLCK
2| ELS-EAL-SS4-BLCK
2.5| ELS-EAL-SS5-BLCK
TYPE IV SHIELDING
Shield Orientation| Cutoff Distance| Fixture Type| Shield
Order Logic
---|---|---|---
Front
| 1| ****
2 Module
| ELS-EAL-FF2-BLCK
1.5| ELS-EAL-FF3-BLCK
2| ELS-EAL-FF4-BLCK
| 2.5| | ELS-EAL-FF5-BLCK
| 1| | ELS-EAL-RF2-BLCK
Front| 1.5| ****
1 Module
| ELS-EAL-RF3-BLCK
2| ELS-EAL-RF4-BLCK
2.5| ELS-EAL-RF5-BLCK
Side
| 0.5| ****
2 Module
| ELS-EAL-FS1-BLCK
1| ELS-EAL-FS2-BLCK
1.5| ELS-EAL-FS3-BLCK
2| ELS-EAL-FS4-BLCK
2.5| ELS-EAL-FS5-BLCK
| 0.5| | ELS-EAL-RS1-BLCK
| 1| ELS-EAL-RS2-BLCK
Side| 1.5| 1 Module| ELS-EAL-RS3-BLCK
2| ELS-EAL-RS4-BLCK
2.5| ELS-EAL-RS5-BLCK
Back| Short| 2 Module| ELS-EAL-FBN-BLCK
Long| ELS-EAL-FBL-BLCK
Back| Long| 1 Module| ELS-EAL-RBL-BLCK
TYPE III SHIELDING
Shield Orientation| Cutoff Distance| Fixture Type| Shield
Order Logic
---|---|---|---
Front
| 1| ****
2 Module
| ELS-EAL-WF2-BLCK
1.5| ELS-EAL-WF3-BLCK
2| ELS-EAL-WF4-BLCK
| 2.5| ELS-EAL-WF5-BLCK
Front
| 1| ****
1 Module
| ELS-EAL-DF2-BLCK
1.5| ELS-EAL-DF3-BLCK
2| ELS-EAL-DF4-BLCK
2.5| ELS-EAL-DF5-BLCK
Side
| 0.5| ****
2 Module
| ELS-EAL-WS1-BLCK
1| ELS-EAL-WS2-BLCK
1.5| ELS-EAL-WS3-BLCK
2| ELS-EAL-WS4-BLCK
2.5| ELS-EAL-WS5-BLCK
Side
| 0.5| ****
1 Module
| ELS-EAL-DS1-BLCK
1| ELS-EAL-DS2-BLCK
1.5| ELS-EAL-DS3-BLCK
2| ELS-EAL-DS4-BLCK
2.5| ELS-EAL-DS5-BLCK
Back
| Short| ****
2 Module
| ELS-EAL-WBN-BLCK
Long| ELS-EAL-WBL-BLCK
Back| Long| 1 Module| ELS-EAL-DBL-BLCK
TYPE II SHIELDING
Shield Orientation| Cutoff Distance| Fixture Type| Shield
Order Logic
---|---|---|---
Side
| 0.5| ****
2 Module
| ELS-EAL-NS1-BLCK
1| ELS-EAL-NS2-BLCK
1.5| ELS-EAL-NS3-BLCK
2| ELS-EAL-NS4-BLCK
2.5| ELS-EAL-NS5-BLCK
Side
| 0.5| ****
1 Module
| ELS-EAL-AS1-BLCK
1| ELS-EAL-AS2-BLCK
1.5| ELS-EAL-AS3-BLCK
2| ELS-EAL-AS4-BLCK
2.5| ELS-EAL-AS5-BLCK
Back| Short| 2 Module| ELS-EAL-NBN-BLCK
Long| ELS-EAL-NBL-BLCK
Back| Long| 1 Module| ELS-EAL-ABL-BLCK
LED.com
© 2023 Current Lighting Solutions, LLC. All rights reserved. Information and
specifications subject to change without notice. All values are design or
typical values when measured under laboratory conditions.
(Rev 05/15/23)
OLP3120-Evolve-EAL-Series-Area-Light-Shielding-Ordering-Guide-Spec-Sheet_R01
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>