Kmart 43288656 DIY Macrame Mini Wall Hangings Instructions

Kmart 43288656 DIY Macrame Mini Wall Hangings

Kit Includes

• 3 x wooden rods
• 3 x macrame cords
• 1 x instruction sheet

Double Half Hitch (DHH) Knot

Cut The Cords

Each Colour

• 120cm x 7pcs
• 90cm x 1pc
• 80cm x 1pc
• 70cm x 1pc
• 60cm x 1pc
• 50cm x 1pc

Lark’s Head l(not (LHK) -bar In Front

How To Make A Mini Wall Hanging

1. Fold 2pcs of 120cm cord in half and tie them to the wooden rod using knots – LHK – bar in front. The 1st cords shown above should be even in length. The 2nd cords should have one cord longer than the other. Adjust the lengths, making the right cord 10cm longer than left cord. matching the example above.

2. Take the 2nd cord from left as a core cord and tie it to the 3rd cord using a DHH knot.

3. Using the core cord again repeat step 2.
   ! !Jing a DHH knot onto the next cord as shown. Knots should be made in the direction of left to right.

4. Take the core cord again, and tie a knot on the rod as shown.

5. Take the core cord again repeat step 4 making a 2nd knot as shown.

6. Tighten the knots to complete the 1st row.

7. Fold 1pc of 120cm cord in half and tie it to the left side of the wooden rod using a knot – LHK -bar in front. Adjust the lengths.
   making the right cord 12cm longer than left cord, matching the example above.

8. Take the 2nd cord from left as a core cord and tie it to the 3rd cord using a DHH knot.

9. Using the core cord again repeat step 8.
   !!Jing a DHH knot onto the next cord as shown.

10. Next. to fill the gap between the cords. fold 1pc of 90cm cord in half and tie it onto the core cord using a knot – LHK -bar in front.

11. Fold 1pc of 120cm cord in half and tie it to the left side of the wooden rod with a LHK -bar in front. Adjust the lengths, making the right cord 14cm longer than left cord, matching the example above.

12. Take the 2nd cord from left as a core cord and make DHH knots with all cords for the 3rd row. When you find a gap between the cords, fold 1pc of 80cm cord in half and tie it onto the core cord using a knot – LHK -bar in front.

13. Repeat steps 7-13 to make total 6 rows.
    With each row. you will add an extra cord where you find a gap, to fill the row.
    Row 4: Add a 70cm cord and adjust the lengths, making the right cord 16cm longer than left cord.
    Row 5: Adjust the lengths, making the right cord 18cm longer than left cord.
    Row 6: Add a 60cm cord and adjust the lengths, making the right cord 20cm longer than left cord Toke 1pc

14. Take the 2nd cord from left as a core cord and make DHH knots with all cords for the 3rd row. When you find a gap between the cords, fold 1pc of 80cm cord in half and tie it onto the core cord using a knot – LHK -bar in front.

15. Repeat steps 7-13 to make total 6 rows.
    With each row. you will add an extra cord where you find a gap, to fill the row.
    Row 4: Add a 70cm cord and adjust the lengths, making the right cord 16cm longer than left cord.
    Row 5: Adjust the lengths, making the right cord 18cm longer than left cord.
    Row 6: Add a 60cm cord and adjust the lengths, making the right cord 20cm longer than left cord

16. Toke 1pc of 50cm cord and make tie it to wooden rod for hanging.
    Trim the cord ends neatly to complete your wall hanging.
    

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>