Kmart 43284450 DIY Needle Felting Wall Hanging Instructions

Kmart 43284450 DIY Needle Felting Wall Hanging

DIV Needle Felting Wall Hanging

kit Includes

• 1 x 20cm embroidery hoop

• 2 x needles

• 6 x coloured wool

• 1 x foam

• 1 x felt backing fabric

• 1 x instruction sheet

Tips

• Begin with a small amount of wool and gradually build up the color.
• Try not to cut the wool with scissors, instead gently pull it apart to the size you need.
• The tips of felting needles are delicate, 2D felting doesn’t require you to push the needle in very far.
• Hold your work up to the light to show you any gaps in the felting.
• To add the felt sheet to the hoop, begin by separating the
• To circles and lay the sheet over the inner one. Place the larger circle over the top and press down to secure the fabric. Adjust the fabric position to ensure the design is centred. Tighten the screw and gently pull the fabric edges to ensure it’s taut. Do not pre wash the fabric.

How To Make A Felt Wall Hanging

1. Place the felt sheet on the foam with the printed side facing upwards.
2. Gently separate small pieces of wool for each part of the design.
3. Place the first piece of wool within the section you want to start felting. Fold the edges underneath to create neat edges.
4. Using a single needle, begin poking it through the wool into the felt sheet.
5. After felting the main shapes, use thin sections of wool to add extra height to your shapes.
6. Repeat steps 3-5 for all shapes. Once complete. place the fabric in the hoop and it’s ready to display.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>