WatchGas MKT-KIOSK Compliance Kiosk User Guide

June 12, 2024
WatchGas

WatchGas - logo

Compliance
Kiosk
Quick Start Guide
Compliance Kiosk | QSG | V 1.0 | EN | 26-06-23

CAUTIONS & BEST PRACTICES

  • If the Compliance Kiosk appears to be damaged or is not functioning properly, please contact WatchGas or a local WatchGas distributor.
  • Avoid the station encountering liquids. Compliance Kiosk cannot be mounted in an outdoor location that could be exposed to rain or wet conditions.
  • Compliance Kiosk has no hazardous location approvals and can only be used in a safe and non-hazardous environment known to be free of toxic and/or flammable gas.
  • Servicing can only be carried out by a WatchGas office or trained service technician.
  • The warranty does not cover electrical surges, physical and/or water damages.

WARNING

IMPORTANT SAFETY INFORMATION: READ FIRST

  • To ensure personal safety, read Safety Information and Warnings before using the Compliance Kiosk.
  • Use the Compliance Kiosk only as specified by the manufacturer. Failure to do so may impair the protection provided by the Compliance Kiosk. The safety and security of any system or network incorporating the Compliance Kiosk and its accessory components is the responsibility of the assembler of the system.
  • Follow all required National Electric Codes (NEC) and safety codes.
  • Do not attempt to adjust, disassemble, or service the equipment.
  • Only use the supplied charging adapter, USB C 5V charger 15 Watt.

WatchGas MKT KIOSK Compliance Kiosk - icon1

PREPARE FOR USE

  • Ensure WatchGas software “Site Unique ID” that has been provided.
  • Ensure internet connectivity either by WIFI or installing a SIM for Cellular connection.

INTRODUCTION

The WatchGas Compliance Kiosk works as a terminal to allow the user to check- in the gas detector and provides a full overview of the device status including any unreported events. The WatchGas compliance Kiosk automatically sends all data to a designated software site, providing a cost effective overview of fleet health, predictive maintenance, events and alarms. Furthermore the WatchGas Compliance Kiosk provides the capability to actively manage detector settings and user assignments.

COMPLIANCE KIOSK OVERVIEW

  1. Touch screen
  2. Power supply
  3.  Touch screen ON/OFF
  4. Instruction Label
  5. Detector inset location
  6. Mounting bracket table / wall mount

WatchGas MKT KIOSK Compliance Kiosk - fig1

MOUNTING THE COMPLIANCE KIOSK

The WatchGas Compliance Kiosk is intended for wall mount or on a stand.
Ensure the power cable is fastened in order to avoid damaging it and potential trip hazards.
See drawings below.
Wall Mounting
The provided mounting brackets can be used to mount the Compliance Kiosk to a wall or table. WatchGas recommends checking the strength of the mounting area and selecting the proper mounting hardware before mounting the Compliance Kiosk. Mounting the Compliance Kiosk should be performed by a qualified installation contractor.

WatchGas MKT KIOSK Compliance Kiosk - fig2

ENTER SET UP

Click upper left icon and enter password.

WatchGas MKT KIOSK Compliance Kiosk - fig3

Setup Menu

WatchGas MKT KIOSK Compliance Kiosk - fig4

Saved Configuration Files: Setting up reference files to compare gas detectors against.

WatchGas MKT KIOSK Compliance Kiosk - fig5

Select Unit type and model.

WatchGas MKT KIOSK Compliance Kiosk - fig6

File Function
To set the file for use for compliance and the settings required in the detector such as alarm level and functions.

WatchGas MKT KIOSK Compliance Kiosk - fig74

Event Log Menu
Shows all units checked in event list.

WatchGas MKT KIOSK Compliance Kiosk - fig9

Compliance Reader Setup
To enable the software activation, enter the Site Unique ID to connect the account’s specific site.This number is provided with the software solution purchase.

WatchGas MKT KIOSK Compliance Kiosk - fig10

Application Setting
Flush Application Data cleans unneeded data after 30 days.
Assign Check Function: if the gas detector does not have an User ID the App will require you to enter one.
Unassign Site ID: To be used in Device link mode.
Send GPS – not utilized.
Change password option.

WatchGas MKT KIOSK Compliance Kiosk - fig11

HOW TO USE

Activate the NFC.
Activate the NFC on the detector.
Tap the detector to the Compliance Kiosk by means of inserting in the clip holder.

WatchGas MKT KIOSK Compliance Kiosk - fig12

Follow the Compliance Kiosk screen for actions.
Note the action here.
After confirming if needed.
Exit the compliance check.

WatchGas MKT KIOSK Compliance Kiosk - fig13

INSERTING THE DETECTOR

Step 1
Power on the gas detector if required, if it is a 2- or 3-year SST1, then the device will already be activated. Turn on NFC.
Step 2 Switch on the Compliance Kiosk NFC.
Step 3 Tap the unit and allow time for data transfer.
Step 4 Confirm any actions needed.
Step 5 Exit the compliance check.

SPECIFICATIONS

Dimensions (LxWxH) 28 x 21 x 4 cm (11 x 8.25 x 1.5 in)
Weight 800 g (1.76 lb)
Operating Temperature +5-40 °C (40-104°F)
Humidity 10% to 90% RH
Storage Temperature 0-50 °C (32-120°F)
Power Supply USB C 5V
Real Time Clock Yes, updatable
Data Storage More than 1 year of operation
Connection capability Wi-Fi, Cellular, BLE – Connected into the RTR

COMPLIANCE WATCH
Testing Function| Device status
Device Compatibility| One module compatible with SST Range
Warranty| 2 Year warranty

WARNING
NO USER-SERVICEABLE PARTS INSIDE

MAINTENANCE

The best practices for maintenance are to perform routine firmware updates. The WatchGas Compliance Kiosk can be cleaned with a soft, damp cloth. Do not use solvents, soaps, polishes, or immerse the WatchGas Compliance Kiosk in liquids. Completely turn  off unit and disconnect power supply before cleaning.

WARNING
ONLY USE ORIGINAL WATCHGAS PARTS AND/OR ACCESSORIES

PARTS AND ACCESSORIES

Serviceable parts and accessories are sold separately. Please contact WatchGas or an authorized distributor, or visit the website at www.watchgas.com or www.watchgasusa.com if in North America.
Parts list:

  •  On/OFF key
  • Power supply
  •  USB power cable
  • Allen wrench
  • Mounting kit
  •  QC Card
  • Quick Start Guide

TROUBLESHOOTING

Server connectivity:

  1. Check internet connectivity.
  2. Check Compliance software is active.
  3.  Check the firmware is updated.

Detector not connecting:

  1. Redo the test.
  2.  Verify NFC is enabled on the detector.
  3. Test a known functional detector in the station to verify station function.

Station fail:

  1. Clear fault and retry.
  2.  Contact service representative.

CONTACT INFORMATION
Klaverbaan 121, 2908 KD, Capelle a/d IJssel, the Netherlands
info@watchgas.com | www.watchgas.com
313 N. State Hwy 342, Red Oak, Texas 75154, United States
info@watchgasusa.com | www.watchgasusa.com

Compliance Kiosk | QSG | V 1.0 | EN | 26-06-23 © 2023 WatchGas B.V.
WatchGas is dedicated to continuously improving its products. Therefore, the specifications and features mentioned in this QSG are subject to change without prior notice.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals