LG Universal Magic Remote Instructions
- June 12, 2024
- LG
Table of Contents
LG Universal Magic Remote
Product Information
- Power supply: 1.5 V battery x 2
- Voltage: 3V
- This product is designed to function with two 1.5 V batteries, resulting in a total voltage of 3V.
Product Usage Instructions
Power Supply:
- Ensure the product is turned off before inserting or replacing batteries.
- Open the battery compartment located on the back of the device.
- Insert two 1.5 V batteries, making sure to align the positive and negative terminals correctly.
- Close the battery compartment securely.
Using the Product:
- This product may have two different modes of operation, indicated by two different voltage settings.
- To switch between modes, refer to the product manual or consult the manufacturer for specific instructions.
- Ensure that the product is properly connected and set up according to the desired mode of operation.
- Follow the specific instructions provided by the manufacturer for optimal usage of the product.
Note : This product should not be disassembled or tampered with. Any modification to the product may result in damage or voiding of the warranty.
Universal for LG Magic Remote Compatible with for LG Smart TV Voice Remote Control Equipped with Hotkeys Such as Netflix/ Prime-Video/Movies
Battery install steps
- Power supply : 1.5 V battery*2
- Voltage : 3V
Pair the Voice Remote Control
- Press and hold middle scroll button about 2 seconds,
- When the successful registration dialog appears on the TV screen, the remote control is ready to use.
Cancel pair Voice Remote Control
Press & Hold Home & Back Buttons together 6 Seconds, until the red light on
power button blink three times, Top right side of the TV you can see the alert
box. help?
Please confirm that your remote control model works your W a. If the remote
control becomes insensitive after a period of use, please replace the battery
and pair it again. b. If the cursor of the remote control is offset, please
place the remote control on the desktop for I minute before using it.
FCC Compliance Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- (1) This device may not cause harmful interference, and
- (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment . This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>