LG YKR019 Magic Remote Control Instruction Manual
- June 12, 2024
- LG
Table of Contents
LG YKR019 Magic Remote Control
Product Information
The Magic Remote control is a remote control device designed for use with your TV. It operates using RF (Radio Frequency) technology instead of infrared, allowing it to work within a range of 10 meters from the TV without needing to be pointed directly at it. The remote control also supports voice recognition.
Here are the specifications for the remote control:
- Model Name: [Model Name]
- Range of Frequency: [Range of Frequency]
- Channel: [Channel]
- Power Source: [Power source]
- Operational Temperature Range: [Operational temperature range]
Product Usage Instructions
Installing Batteries
- Press the top of the battery cover, slide it back, and lift the cover.
- Insert alkaline batteries (1.5V, AA) into the compartment, matching the “+” and “-” ends to the label inside.
- Close the battery cover securely.
Note: Make sure to point the remote control at the remote control sensor on the TV.
Removing Batteries
- Open the battery cover.
- Remove the old or used batteries.
- Insert new batteries following the same instructions as mentioned above.
- Close the battery cover securely.
Remote Description
Please note that the actual product may differ from the remote control image shown. The availability of buttons and services may vary depending on the model or region.
The remote control includes the following buttons and features:
- (POWER) Number buttons
- (HOME) (Q. Settings) Wheel (OK)
- (DASH)
- (INPUT)
- (MORE ACTIONS)
- Streaming Service buttons
- (VOL) (Voice recognition) (MUTE)
- (CH/P)
- (Control buttons)
To use the buttons, press and hold them for more than 1 second.
How to Register (Pair) or Deregister (Unpair)
How to Register (Pair) the Magic Remote
- Insert batteries into the Magic Remote and turn on the TV.
- Point the Magic Remote at your TV and press the Wheel (OK) button on the remote control.
- If the TV fails to register the Magic Remote, try again after turning the TV off and back on.
How to Deregister (Unpair) the Magic Remote
To unpair the Magic Remote with your TV:
- Press and hold the (HOME) and buttons at the same time for five seconds.
- If you want to disconnect and re-register the Magic Remote atthe same time, press and hold the GUIDE button for more than 5 seconds.
How to Use
To make the pointer appear on the screen:
- Shake the Magic Remote slightly to the right and left, or
- Press the (HOME), (INPUT), or (Q.Settings) buttons, or
- In some TV models, turn the Wheel (OK) button.
If the pointer has not been used for a certain period of time or if the Magic Remote is placed on a flat surface, the pointer will disappear. If the pointer is not responding smoothly, you can reset it by moving it to the edge of the screen.
Precautions
- After replacing the battery, follow the pairing instructions in the user manual.
- If the remote control does not operate after battery replacement, retry pairing following the user manual.
- If the remote controller is not being used for a prolonged period, it is recommended to remove the battery from the unit.
- Do not dismantle or expose the battery to heat.
- Avoid dropping the battery or exerting extreme impact that may damage the case.
Overview and Specifications for the remote control
Overview
Instructions for using the Magic Remote control are in the TV manual.
This remote uses RF(Radio Frequency) instead of infraed This remote will
operate within 10m of the TV and does not require it be pointed at the
TV.(Voice recognition support)
| CATEGORIES | DETAILS |
|---|---|
| Model Name | YKR019 |
| Range of frequency | 2.400 GHz to 2.4835 GHz |
| Channel | 40 channels |
Power source
| AA 1.5 V,
2 alkaline batteries are used
Operational temperature range| 0°C to 40°C (32°F to 104°F)
Installing Batteries
- Please read this manual carefully.
- Press the top of the battery cover, slide it back, and lift the cover as shown below.
- To replace batteries, open the battery cover, replace alkaline batteries (1.5V,AA) matching + and – ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control at the remote control sensor on the TV.
- To remove the batteries, perform the installation actions in reverse. Don’t mix old or used batteries with new ones. Close the cover securely.
- Open the battery cover to find the label.
Remote Description
- The remote control image shown may differ from the actual product.
- The order of description may differ from the actual product.
- Some buttons and services may not be provided depending on models or regions.
To use the button, press and hold for more than 1 second.
Using the Remote
How to register (pair) the Magic Remote
To use the Magic Remote, first pair it with your TV
-
Put batteries into the Magic Remote and turn the TV on.
-
Point the Magic Remote at your TV and press the
-
If the TV fails to register the Magic Remote, try again after turning the TV off and back on.
Wheel (OK) on the remote control. -
How to register (pair) or deregister (unpair)
-
How to deregister (unpair) the Magic Remote
- Press and hold the (HOME) and buttons at the same time for five seconds, to unpair the Magic Remote with your TV.
- Press and hold the button for more than 5 seconds to disconnect and re-register the Magic Remote at the same time.
Shake the Magic Remote slightly to the right and left or press (HOME),
(INPUT),or (Q.Settings) buttons to make the pointer appear on the screen.
(In some TV models, the pointer will appear when you turn the Wheel (OK)
button.)
- If the pointer has not been used for a certain period of time or Magic Remote is placed on a flat surface, then the pointer will disappear.
- If the pointer is not responding smoothly, you can reset the pointer by moving it to the edge of the screen.
- The Magic Remote depletes batteries faster than a normal remote due to the additional features.
Precautions
- After the replacement of the battery,use the remote control following pairing in accordance with user manual.
- If the unit does not operate after the replacement of battery, reattempt pairing in accordance with user manual.
- If the remote controller is not being used for prolonged period of time, it is recommended you remove the battery from the unit.
- Do not dismantle or exert heat to the battery.
- Do not drop battery or exert extreme impact that may even cause the case to be damaged.
- Do not immerse the battery in water.
- Caution: Risk of fire or explosion if the battery is replaced by an incorrect type.
- Properly dispose of used batteries.
- Open the battery cover to find the label.
Supported LG TVs
2018 TVs / 2017 TVs
-
W8/G8/E8/C8/B8/A8/SK9/SK8/SK7/UK9/UK8/UK7
-
W7/G7/E7/C7/B7/SJ9/SJ8/SJ7/UJ9/UJ8/UJ7
-
UK6/LK6/LK5/UJ6/LJ6/LJ5 (Please verify whether the TV Bluetooth)
-
2019 TVs
-
W9/E9/C9/B9/SM9/SM8/UM8/UM7 (Please verify whether the TV Bluetooth)
2020 TVs -
ZX/WX/GX/CX/BX/NANO9/NANO8
-
UN8/UN7 (Please verify whether the TV Bluetooth)
-
2017 TVs can be used after their software has been updated.
-
Not all models listed are supported in all countries.
-
Models listed are subject to change without prior notice.
FCC STATEMENT
Federal Communications Commission (FCC) Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules.These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions may cause harmful interference to radio communications.
However,there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and recevier.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
-
Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:- This device may not cause harmful interference,and
- This device must accept any interference received,including interference that may cause undesired operation.
You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.
FCC Caution
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user‘s authority to operate this equipment and
For indoor use only, use outdoors or in other modes not covered by this manual
may violate the FCC regulation and violate the user authority to use the
product.
FCC RF Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.End users must follow the specific operating
instructions for satisfying RF exposure compliance.