NIVIAN NVS-IPC-06-BAT Battery Camera User Manual
- June 12, 2024
- NIVIAN
Table of Contents
Maintenance voucher of intelligent
Brief information:
Product: Battery camera
Wireless Encryption: WEP/WPA/WPA2 Encryption
Support System: Android/iOS
Component Description:
Reset Button: Press and hold “reset” button for 5sec, reset success.
It is recommended to insert 8-128GB high-speed Micro TF card, otherwise it may cause failures to store, play recorded video and other malfunctions including firmware upgrade.
Part list:
Battery camera × 1
Manual × 1
USB Power Cable × 1
Screw Accessories Package x 1
Install APP
Download APP: scan the QR code below to download and install.
Register and login: open the ” Smart Life” APP to register and login according
to the guide in the APP.
Please follow the instructions in the mobile APP (the instructions are for reference only)
Add The Device-Scan QR code mode
- Make sure Wi-Fi is available and connected to the Internet.
- Connect the camera to the power, then system startup completed
- Open “Smart Life” APP, press the’+’ in the upper right corner of the main screen (Figure 01); choose “Security & Video Surveillance”, click “Smart Camera” (Figure 02) to add camera; and then click “Next step” (Figure 03);
Please note that only 2.4 GH Wi-Fi network is supported;
- Camera is “connecting” (Figure. 08); If the mobile phone is not connected to Wi-Fi, please click “Connect to Wi-fi” (Figure 04);
- It will jump to the WLAN interface and connects Wi-Fi (Figure 05).
- If the phone is connected to Wi-Fi (Figure 06), Tap “next”；
- A QR code will prompt on phone screen and you need to scan it with the Smart Camera. (the camera is about 20-30 cm away from the mobile phone screen). Then tap “I heard a prompt” (Figure. 07.
- Camera is “connecting” (Figure. 08);
- Connection completed(Figure 09), tap “Done”
- It jumps to preview page (Figure 10)
- After closing the device preview page, it returns to the APP home page.
- At this time, the connected device will appear on the APP home page (Figure 11).
- Then you can tap directly to the device page to monitor.
Add The Device-AP Mode
- Select “AP Mode” (Figure 12)
- Click Next (Figure 13)
- Enter the account and password that can connect to WIFI (Figure 14)
- Click “Go Connect” (Figure 15)
- Go to “Smart Life-XXXX “and click Connect (Figure 16)
- Connecting (Figure 17)
- Click to complete the connection (Figure 18)
- Video screen (Picture 19)
Note
Recommended to install in open space without metal interference;
Avoid blocking from furniture , microwave oven, etc;
Avoid to install in the space where the audio, video and data lines are wound,
and keep away from them as far as possible;
Install as near as possible to wireless Wi-Fi router;
When changing to the new environment, please press and hold the reset button
for 5 seconds, then connect to the network.
The name and content of the harmful substances in the product
This product conforms to RoHS environmental protection requirements. At present, there is no mature technology in the world to replace or reduce the lead content in the electronic ceramics. porcelain, optical glass, steel and copper alloy.
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. lf this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- ln crease the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure lnformation:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator &your body.