U Speakers MagPower Magnetic Power Bank User Manual
- June 12, 2024
- U Speakers
Table of Contents
MagPower Magnetic Power Bank
User Manual
MagPower Illustration
- Power button
- Stand
- USB-C Input/Output
- USB output interface
- Battery indicator
- Wireless charging pad
Product Features
- 15W wireless output, unlimited fast charging with magnets.
- New 3-in-1 power bank, magnetic charging, foldable stand.
- 22.5W/PD 20w Direct fast Charging, high efficiency charging.
- LED indicator, showing real-time power.
- High-quality polymer lithium battery.
Packing List
- MagPower charger X 1
- Warranty Card/Certificate X 1
- Manual X 1
- Type C Charging Cable X 1
Notes for Use
- There will be a short delay when you apply the MagPower onto your device before it begins to charge.
- Ensure that your phone is compatible with MagSafe charging.
- Ensure that your case will not interfere with the MagSafe charging.
- Ensure that the MagPower is turned on and the blue light is solid (refer to step 5 on previous section).
- If you would like to use the MagPower as a power bank, use a supported USB charging cable that is compatible with your device.
Product Specifications
Rated Energy | 22.2Wh |
---|---|
Battery Capacity | 10,000mAh |
Battery Type | Polymer lithium battery |
Maximum Direct Charge via USB | 22.5W / PD20W |
Wireless Charging Power | 5W/7.5W/10W/15W Max |
Output USB | 5V 4.53A/9V 2A/12V 1.5A Max |
Output Type C | 5V 3A/9V 2.2A/12V 1.5A Max |
USB+Type C simultaneous output | 5V 3A |
Input Type C | 5V 3A/9V 2A Max |
Executive Standard | GB/T 35590-2017 |
MagPower Instructions
Upon opening the MagPower charger, it is important to plug it into a power source to charge.
- Use the Type-C cable included with the packaging to plug the MagPower into a power source.
- Wait until the light indicator shows a full charge. You should see 4 white lights on the bottom right-hand side of the product.
- Once the product is fully charged, turn it on using the power button on the right.
- Click once to power on the device. There will be a light indicator on the bottom right-hand side of the product that will show the charging status. Now that your MagPower is fully charged it is ready to use to power your phone.
- Place the product on the back of your phone and secure it in the center using the magnet. You will see a solid blue light indicating that it is charging. *Please note that there might be a 2-3 second delay between the time the MagPower is placed on the device and when the charging begins.
- As the MagPower transfers charge to your phone, the 4 white lights will begin to fade.
- Once the white lights are completely gone, it is time to charge the MagPower again. (refer to steps 1-3)
- To charge your device directly via the USB output, please use a supported USB charging cable.
MagPower Kickstand
The MagPower is equipped with a stand for a convenient way to watch videos
while your device is charging.
To use the built in foldable stand, simply pull on the tab on the top right of
the MagPower and fold it down to the specified area.
Check out our full line of products!
www.shopuspeakers.com
Scan the QR code with your phone to access the U Speakers
website.https://www.shopuspeakers.com
info@shopuspeakers.com
@uspeakers
www.shopuspeakers.com
All rights reserved to I&G designs and logistics, LLC
d/b/a Fashionit U Speakers
3/2/23 4:29 PM
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>