U Speakers Juicebar Sage User Manual
- June 12, 2024
- U Speakers
Table of Contents
U Speakers Juicebar Sage User Manual
PRODUCT DESCRIPTION
- Adjustable Wireless Coil
- Non-slip Mat
- USB A Output
- Type C Input/Output
- Wireless Charging Indicator
- Power Rate Indicator
- Micro USB Input
- Airpod Charging Indicator
- Gear of Wireless Coil
- Power Button
- Wireless Charging Pad for Apple Watch®
- Airpod Charging Pad
PRODUCT SPECIFICATIONS
Battery Capacity: | 10000 mAh |
---|---|
Rated Capacity: | 6500mAh |
Type C Input: | 5v/2.6A, 9V/2A |
MicroUSB Input: | 5v/2A, 9V/2A |
USB-A Output: | 5V/3A, 9V/2A, 12V/1.5A |
Type C Output: | 5V/2.4A, 9V/2.22A, 12V/1.67A |
Wireless Output(Mobile): | 5W, 7.5W, 10W, 15W, 20W |
AirPods Output: | 5W (Max) |
iWatch Output: | 3W (Max) |
/simultaneousOutput: | 5V/3A |
Dimension: | 6.46 x 2.85 x 1.07 inch |
(164.1 x 72.6 x 27.4mm) | |
Weight: | 11.81 oz (335 g) |
WARNING
- The power bank stand will generate heat when charging (it is normal for the wireless charging technology). Please use it in a well-ventilated area when charging.
- Keep the power bank stand away from heat sources, direct sunlight, humidity, water or other liquids.
- Do not operate the power bank stand if it is wet or damaged to prevent electric shock and explosion. Do not repair without unauthorized.
- Do not use the power bank stand with wet hands.
- Do not use the unit for purposes other than its intended use.
When your wireless charging is not working properly
Clean the clutter on the wireless charge.
Please make sure the wireless charging coil is correctly positioned with the
phone coil.
When the wireless charger is overheating, keep your mobile device away from
the wireless transmitter. Please wait for the wireless transmitter to cool
down before trying to charge it.
JUICEBAR OPERATION
Power Button
Use of Switches
Press the power button once to turn the device on. The battery indicator will
light up to show that it is ready to use and charge all of your devices.
Double click the power button to turn the device off.
Note: if left without use for 25 seconds, the device will shut off and
will need to be turned on again to charge”
Indicator
Wireless Charging Indicator
When idle, the light will be off
When charging, the light will turn white
During faulty charging the white light will flash
AirPods® charging indicator Status
When the Airpod® charging pad is not in use, the light will be off
When the Airpod® charging pad is in use, the light will turn white
Recharging
There are two ways to recharge the Juicebar power bank when the battery is
low:
You can use a Micro USB charging cable, or a Type-C standard charging cable to
connect the device to a power source using the correct adapter.
The Juicebar can still be used to charge your personal devices while it is
being plugged in to recharge.
Output
- Insert the USB charging cable USB A end into an Output.
- Plug the other end of the cable into a terminal such as a phone.
Charging The Mobile Device
Charging Your Mobile Device:
- Place your mobile device on the wireless charger (your phone must be able to support wireless charging technology)
- Depending on the size of your mobile device, you may need to adjust the height of the wireless coil up or down to charge your phone.
Note: The wireless charger is widely compatible with compatible with all wireless charging phones.
Wireless Charging for AirPods
Lay your Airpods down onto the charging area and they will automatically be
detected and begin to charge. Be sure to position the Airpods in their case in
the small groove.
Wireless Charging for Apple Watch®
Lay your Apple Watch® down onto the charging area and it will automatically be
detected and begin to charge.
Check out our full line of products!
www.shopuspeakers.com
Scan the QR code with your phone to access the U Speakers website.
info@shopuspeakers.com @uspeakers
www.shopuspeakers.com
All rights reserved to I&G designs and logistics, LLC d/b/a Fashionit U
Speakers
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>