WISDOM Sage P20m Bi Amplified On Wall Coaxial Planar Magnetic Loudspeaker Owner’s Manual

WISDOM Sage P20m Bi Amplified On Wall Coaxial Planar Magnetic Loudspeaker

Product Information

Sage P20m Bi-amplified On-Wall Coaxial Planar Magnetic Loudspeaker

The Sage P20m loudspeakers are designed to deliver exceptional performance while minimizing intrusion into your living space.
These speakers utilize advanced planar magnetic drivers with thin film membranes, allowing for instant response to signal details and eliminating signal blurring. The lack of thermal or dynamic compression ensures a dynamic and engaging sound experience.

The planar magnetic drivers in the Sage P20m have a large exposed voice coil area, enabling efficient heat dissipation. This makes the drivers highly reliable and capable of handling high power without strain or audible distortion. Additionally, the drivers present a resistive load to amplifiers, ensuring optimal performance.

The Sage P20m loudspeakers incorporate unique design choices uncommon among other loudspeaker manufacturers. Setting up these speakers may require engineering and calibration by Factory Personnel to achieve the best results.

Specifications:

• Driver Type: Planar Magnetic
• Amplification: Bi-amplified
• Mounting: On-Wall
• Coaxial Design: Yes

Dimensions:

• Width: [dimension]
• Height: [dimension]
• Depth: [dimension]

Care & Maintenance:

To ensure optimal performance and longevity, regularly clean the speaker surfaces with a soft cloth. Avoid using abrasive cleaners or solvents. Keep the speakers away from excessive moisture and extreme temperatures.

Product Usage Instructions

1. Unpacking and Installing the Sage P20m:
   Carefully unpack the Sage P20m loudspeakers and inspect for any damage during shipping. Place the speakers in the desired location on the wall, ensuring proper alignment and secure mounting.

2. Making the P20m Connections:
   Connect the speaker wires from your audio source or amplifier to the appropriate terminals on the back of the Sage P20m loudspeakers. Ensure a secure and proper connection to avoid signal loss or distortion.

Owner’s Manual
Sage P20m
Bi-amplified On-Wall
Coaxial Planar Magnetic Loudspeaker

DOCUMENT CONVENTIONS

This document contains general safety, installation, and operation instructions for the Wisdom
Audio Sage P20m Loudspeaker. It is important to read this document before attempting to use this product. Pay particular attention to:

WARNING: Calls attention to a procedure, practice, condition or the like that, if not correctly performed or adhered to, could result in injury or death.

CAUTION: Calls attention to a procedure, practice, condition or the like that, if not correctly performed or adhered to, could result in damage to or destruction of part of or the entire product.

Note: Calls attention to information that aids in the installation or operation of the product.

Introduction

Congratulations on purchasing your Wisdom Audio system. It incorporates many design features engineered to give you decades of pleasure and performance. Many of these design choices are uncommon among loudspeaker manufacturers and bear some explanation. See the following section entitled “Overview” for more information.
Our unique driver designs and our emphasis on achieving real-world performance account for the “system” approach taken. These are not speakers that are simply connected to speaker wires and promptly forgotten. We recognize that setting up a Wisdom Audio system can be a bit more involved than connecting a common set of loudspeakers, which is why we recommend that our systems be engineered and calibrated by Factory Personnel
Your Sage P20m series loudspeaker is specifically designed to avoid the compromises inherent in conventional speaker designs. There are no passive crossover components inside the speaker. Instead, there are direct connections from the amplifiers to their respective High-Pass and Low-Pass drivers and an external active crossover is used, such as the ones inside of our Wisdom SA- DSP (Digital Signal Processing) Amplifiers. It is truly a “system” design, and not merely a collection of loudspeaker drivers in a box. Please contact us to learn which products/amplifiers/ surround processors outside of our DSP Amplifiers will work with our speakers and subwoofers. [email protected]

Overview

Your Sage P20m loudspeakers take advantage of several critical technologies to deliver a level of performance that has never been available in a loudspeaker that intruded so modestly on your living space. In fact, this level of performance has rarely been attained, regardless of the space and budget at one’s disposal.
Since several of these technologies cannot readily be found elsewhere, we will take the time to describe them in more detail than would be necessary for more conventional designs.
Our planar magnetic drivers use an advanced, thin film membrane to move the air.
This film can respond instantly to the smallest detail in the signal. It has vastly less inertia than traditional “cone & dome” drivers, so the signal is never blurred in any way.

One of the most remarkable things about the sound of well-designed planar magnetic speakers is their lack of thermal or dynamic compression. There are several reasons for this:

• The lightweight diaphragm responds quickly to even the smallest signals yet is robust enough to handle a great deal of power.
• The voice coil is laid out at and is exposed to the air on both sides; the large resulting surface area dissipates heat extremely quickly and efficiently.
• Since heat does not build up in the voice coil (as it does in conventional dynamic drivers), the load seen by the amplifier does not change at high power levels.

When you become accustomed to the sound of your new Sage P20m speakers, conventional speakers sound a bit bland and lifeless. You may also discover yourself hearing details at even modest levels on the Sage P20m that were previously inaudible even at loud volumes on more conventional speakers.
The “voice coil” in the planar magnetic driver is spread out over a large, at area that is exposed to the open air. As such, when a huge transient comes along, any heat that is generated is immediately dissipated. This compares quite favor- ably to other designs in which the voice coil is buried inside a massive piece of metal,where the heat has effectively no place to go. The excellent heat dissipation of these drivers makes them remarkably reliable.

Planar magnetic speakers can handle a great deal of power without undue stress or audible strain. In fact, for a given size, they can handle many times the power of a traditional dynamic driver.

Because the conductor of a planar magnetic driver is essentially a long, thin wire, it presents a purely resistive load to the amplifier. This is comparable to the simple test loads that amplifier companies use when measuring their amplifiers to show how terrific they are. As such, you can be assured that your amplifiers will sound and work their best.
Authoritative, deep bass requires that you move a lot of air. We have chosen to use dynamic woofers for the bass because they can provide excellent performance at lower frequencies.

To get comparable bass performance from a planar magnetic design, you would need to have a huge speaker that would be impractical in most domestic living spaces. It simply makes more sense to use the best transducer technology in each area of the reproduced spectrum. One of Wisdom Audio’s strengths is in seamlessly blending these technologies – particularly important given the high standards set by our planar magnetic drivers.
Of course, the dynamic woofers themselves must be rather extraordinary to “keep up” with the planar magnetic drivers right up to the crossover frequency.
Our woofers are different because they must be to do their job. Specifically, we need highly dynamic, uncompressed bass (to keep up with the planar magnetic drivers) that does not depend on a critical amount of enclosure volume (since these speakers are mounted in your wall and use the space inside the wall as their “enclosure”). These two design goals require rather extraordinary attention to myriad details.
Many speakers include a mid-bass “bump” in their response to give the illusion of going deeper in the bass than they actually do. Unfortunately, this “bump” makes blending them seamlessly with a high-quality subwoofer almost impossible.

All Sage Series speakers have been designed to optimally crossover at 80 Hz, which is the most-common crossover frequency used with subwoofers.

Unpacking and Installing the P20m
The Wisdom Audio Sage P20m freestanding speaker is a substantial piece of equipment. Please exercise caution when unpacking your P20m to ensure that you do not strain yourself from its (perhaps unexpected) weight.

CAUTION: Do not attempt to lift your P20m while bending or twisting from the waist. Use your legs for lifting, not your back. Always stand as straight as possible and keep the P20m close to your body to reduce strain on your back.
The speaker is shipped in a “telescoping” box (two five-sided boxes, one of which fits snugly inside the other). Gently roll the box over so that its bottom is facing up.
Then carefully cut the tape along the bottom of the box on all four sides. Roll the box over again so the bottom is on the floor and lift off the top. With one person at each end, carefully lift the speaker out of the box and lay it on a soft surface (carpet or similar).

We do not recommend removing the grille on your new loudspeakers. The grille is an integral part of the design; moreover, the planar magnetic film should never be touched, as it is tensioned precisely at the factory. The grille plays an important protective role as well as an aesthetic one.
After unpacking your P20m, keep all packing materials for future transport. If you need to ship your speaker, only the original, purpose-designed shipping carton is acceptable. Any other method of shipping this product runs a significant risk of damage to the speaker – damage that would not be covered by the warranty. (If you lose your packaging and need to ship your speakers, replacement packaging can be purchased from Wisdom Audio.)

Mounting the P20m on the Wall
The mounting brackets and template are included. Please visit our YouTube channel and installation video if you need assistance. https://youtu.be/fLPfsufSzFk

If you need to remove the speaker from the bracket for any reason, first remove the security screw using the supplied Allen wrench. A sharp upward rap with the base of one hand or even a non-marring, dead blow hammer will help jar it loose.
(Make sure the speaker itself is being supported by an assistant so it does not come free from the wall unexpectedly.)

Important! Do not use the P20m as a shelf! While its mounting system is quite rugged, it is designed to securely support the weight of the speaker itself. Do not place additional objects on it, and do not climb on it.

Making the P20m Connections

As with any system, you should make changes to the connections only when the power is turned off to avoid any chance of inadvertently causing a problem (such as a short-circuit).
Two sets of speaker wires are required for each Sage P20m loudspeaker: one for the woofer (low pass) section, and a separate one for the planar magnetic (high pass) section that handles the midrange and treble.
We recommend using heavy-gauge speaker wire, the gauge will vary dependent on your speaker run length. Please consult an authorized dealer to determine what gauge would be best for your application.
Connect the outputs of your Wisdom Audio SA-series amplifier to the appropriate woofer sections, taking care to get both the channel assignments and the polarity correct. Connect the positive (+) terminals on the SA Series amplifier to the positive (+) terminals for the woofer on the loudspeaker; likewise, connect the negative (–) terminals on the amplifier and the speaker, respectively.
Next connect the outputs of your chosen amplifier for the midrange/treble to the Sage P20m planar sections in a similar fashion, taking care with both channel assignments and polarity.

Care & Maintenance

To remove dust from the front of your P20m, use a feather duster or a lint- free soft cloth.
Never attempt to clean the drivers themselves.

Caution!
Do not touch the surface of the planar magnetic drivers, under any circumstances.
The thin film has been carefully pre-tensioned at the factory; any subsequent contact can only damage it.

North American Warranty

Standard Warranty
When purchased from and installed by an authorized Wisdom Audio dealer,Wisdom Audio loudspeakers are warranted to be free from defects in material and workmanship under normal use for a period of 10 years from the original date of purchase.
Furthermore, the transducers (“drivers”) in your Wisdom Audio speakers are warranted to be free from defects in material and workmanship under normal use for a period of 10 years from the original date of purchase.

Harsh Conditions Use
Wisdom Audio loudspeakers are designed for installation and operation in environmentally controlled conditions, such as are found in normal residential environments. When used in harsh conditions such as outdoors or in marine applications, the warranty is three years from the original date of purchase.
During the warranty period, any Wisdom Audio products exhibiting defects in materials and/or workmanship will be repaired or replaced, at our option, without charge for either parts or labor, at our factory. The warranty will not apply to any Wisdom Audio products that has been misused, abused, altered, or installed and calibrated by anyone other than an authorized Wisdom Audio dealer.
Any Wisdom Audio product not performing satisfactorily may be returned to the factory for evaluation. Return authorization must first be obtained by either calling or writing the factory prior to shipping the component. The factory will pay for return shipping charges only if the component is found to be defective as mentioned above. There are other stipulations that may apply to shipping charges.
There is no other express warranty on Wisdom Audio products. Neither this warranty nor any other warranty, express or implied, including any implied warranties of merchantability or fitness, shall extend beyond the warranty period.
No responsibility is assumed for any incidental or consequential damages. Some states do not allow limitations on how long an implied warranty lasts and other states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights,which vary from state to state. This warranty is applicable in the United States and Canada only. Outside of the U.S. and Canada, please contact your local, authorized Wisdom Audio distributor for warranty and service information.

Obtaining Service
We take great pride in our dealers. Experience, dedication, and integrity make these professionals ideally suited to assist with our customers’ service needs.
If your Wisdom Audio loudspeaker must be serviced, please contact your dealer.
Your dealer will then decide whether the problem can be remedied locally, or whether to contact Wisdom Audio for further service information or parts, or to obtain a Return Authorization. The Wisdom Audio Service Department works closely with your dealer to solve your service needs expediently.

IMPORTANT: Return authorization must be obtained from Wisdom Audio’s Service Department BEFORE a unit is shipped for service.
It is extremely important that information about a problem be explicit and complete. A specific, comprehensive description of the problem helps your dealer and the Wisdom Audio Service Department locate and repair the difficulty as quickly as possible.

A copy of the original bill of sale will serve to verify warranty status. Please include it with the unit when it is brought in for warranty service.

WARNING: All returned units must be packaged in their original packaging, and the proper return authorization numbers must be marked on the outer carton for identification. Shipping the unit in improper packaging may void the warranty, as
Wisdom Audio cannot be responsible for the resulting shipping damage.
Your dealer can order a new set of shipping materials for you if you need to ship your loudspeaker and no longer have the original materials. There will be a charge for this service. We strongly recommend saving all packing materials in case you need to ship your unit someday.
If the packaging to protect the unit is, in our opinion or that of our dealer,inadequate to protect the unit, we reserve the right to repackage it for return shipment at the owner’s expense. Neither Wisdom Audio nor your dealer can be responsible for shipping damage due to improper (that is, non- original) packaging.

Specifications

All specifications are subject to change at any time to improve the product.

• Number of required amplifier channels: 2
• Frequency response: 40Hz – 20 kHz ± 2dB relative to the target curve
• Impedance, planar section: 3Ω
• Impedance, woofer section: 3Ω
• Sensitivity, planar section: 87 dB/2.83V/1m
• Sensitivity, woofer section: 87 dB/2.83V/1m
• System impedance: 4Ω
• System sensitivity: 87 dB
• Power handling, continuous: 200w
• Power handling, peak: 500w
• Dimensions: See appropriate dimensions drawings on next page
• Shipping weight, each: 24 lbs. (11 kg)

For more information, see your Wisdom Audio dealer or contact:

Wisdom Audio
1572 College Parkway, Suite 164
Carson City, NV 89706
wisdomaudio.com
[email protected]
775-887-8850

P20m Dimensions

WISDOM and the stylized W are registered trademarks of Wisdom Audio.
Wisdom Audio 1572 College Parkway, Suite 164
Carson City, Nevada 89706 USA
TEL 775-887-8850
FAX 775-887-8820
wisdomaudio.com

Sage P20m OM © 7/2023 Wisdom Audio, Inc. All rights reserved. Printed in U.S.A.

WISDOMAUDIO.COM

References

• HOME - Wisdom Audio

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>