ZEBRA VC80x Vehicle Mounted Computer User Guide

: June 12, 2024
: ZEBRA

Table of Contents

ZEBRA VC80x Vehicle Mounted Computer
Product Information
Mounts
Scanners
Miscellaneous
Product Usage Instructions
Product Family
Vehicle Mounted Computers
VEHICLE-MOUNTED COMPUTERS
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ZEBRA VC80x Vehicle Mounted Computer

Product Information

US AC line cord, 7.5 feet long, grounded, three wire for the AC power supply PS1450. Associated Countries: United States. 100/240 VAC Power Supply, 12V, 6A. AC cable needs to be ordered separately.

Mounts

ARM | ID: MT4301

RAM mount, 4 arm RAM mount, 12 arm VESA plate (for 4 or 12 RAM arm)
Can also be attached to Quick Release Mount Plate (MT4205)

PLATE | ID: MT3502

Round plate (for 4 or 12 RAM arm)
Uses smaller footprint than MT3501 VESA Plate
Clamp base (for 4 or 12 RAM arm), 2 max. width
Clamp base (for 4 or 12 RAM arm), 3 max. width
Rail base (for 4 or 12 RAM arm), 1-1/4 to 1-7/8
Rail base (for 4 or 12 RAM arm), 2 to 2 1/2
RAM 2×3 rectangular base with 2.25 rubber ball

Scanners

RS232 | ID: CBA-R71-C09ZAR
- Cable – RS232: DB9 Female Connector, 9ft (2.8m) Coiled, Power Pin 9
RS232 | ID: CBA-RF2-C09ZAR
- Cable – RS232: DB9 Female Connector, 9ft (2.8m) Coiled, Power Pin 9, -30C
SHIELDED USB | ID: CBA-U46-S07ZAR
- Cable – Shielded USB: Series A Connector, 7ft. (2m), Straight, BC 1.2
SHIELDED USB | ID: CBA-U47-S15ZAR
- Cable – Shielded USB: Series A Connector, 15ft. (4.6m), Straight, BC 1.2
SHIELDED USB | ID: CBA-UF1-S07ZAR
- Cable – Shielded USB: Series A Connector, 7ft. (2m), Straight, BC 1.2, -30C
RS232 | ID: CBA-R37-C09ZBR
- Cable – RS232: DB9 Female Connector, 9ft (2.8m) Coiled, Power Pin 9, with TTL Current Limit Protection
USB | ID: CBA-U09-C15ZAR
- Cable – USB: Series A Connector, 15ft. (4.6m) Coiled
SHIELDED USB | ID: CBA-U01-S07ZAR
- Cable – Shielded USB: Series A Connector, 7ft. (2m), Straight, BC 1.2
SHIELDED USB | ID: CBA-U10-S15ZAR
- Cable – Shielded USB: Series A Connector, 15ft. (4.6m), Straight, BC 1.2

Miscellaneous

ID: SL0001

Stylus and Stylus Holder
Screen blanking cable (DB9 to open wires)

Product Usage Instructions

To use the product, follow the instructions below:

For power supply, connect the US AC line cord to the AC power supply PS1450. Make sure the power supply is compatible with the associated countries’ voltage (100/240 VAC). Order the AC cable separately if required.
For mounting, choose either the ARM | ID: MT4301 or PLATE | ID: MT3502 options based on your requirements. Follow the provided instructions to attach the mount securely.
If using a scanner, select the appropriate cable based on the scanner model and connectivity type (RS232 or USB). Refer to the cable IDs for identification.
For RS232 cables, ensure the connectors match the device (DB9 Female Connector) and the cable length (9ft coiled) suits your setup. Pay attention to additional specifications like power pin and temperature tolerance if applicable.
For USB cables, choose between shielded or unshielded options based on your needs. Consider factors like cable length, connector type (Series A), and compatibility with BC 1.2 or temperature tolerance if required.
If using the product for stylus-related tasks or screen blanking, refer to the provided instructions for stylus usage and connecting the screen blanking cable (DB9 to open wires).

Product Family

$ZEBRA-VC80x-Vehicle-Mounted-Computer-FIG-1 $1$$

	VC8300 8″	VC8300 10″
Display	Half	Full
Platform	Qualcomm S0660	Qualcomm S0660
Keyboard	Integrated	External / Virtual

Features

| • Unique feature set for continuous operations in freezers, cold storage and condensing environments

• Multiple mounting options,

• A 10-second quick release mount

Vehicle Mounted Computers

Configuration & Accessories Guide

The Zebra Technologies portfolio of accessories extends the capabilities of your VC80x or VC8300, and enables you to lower the cost of ownership of your Zebra mobile computer.
This simple step-by-step guide is designed to assist you with the selection of your accessories based on your needs and use of the computers.

VEHICLE-MOUNTED COMPUTERS

Install Illustration $ZEBRA-VC80x-Vehicle-Mounted-Computer-FIG-1 $3$$

Step 1: Power Supplies and Cables
Choose from multiple installation cases

Plug into an AC wall outlet: Slide 6
Plug into the Vehicle’s DC power: Slides 10-14 $ZEBRA-VC80x-Vehicle-Mounted-Computer-FIG-1 $4$$
Step 1:
Power Supplies & Cables $ZEBRA-VC80x-Vehicle-Mounted-Computer-FIG-1 $5$$ $ZEBRA-VC80x-Vehicle-Mounted-Computer-FIG-1 $6$$ $ZEBRA-VC80x-Vehicle-Mounted-Computer-FIG-1 $7$$ $ZEBRA-VC80x-Vehicle-Mounted-Computer-FIG-1 $8$$ $ZEBRA-VC80x-Vehicle-Mounted-Computer-FIG-1 $9$$ $ZEBRA-VC80x-Vehicle-Mounted-Computer-FIG-1 $10$$
Step 2:
Mounts
Choose the following:
- RAM Mount
- Quick-Release Mount
- U-Mount
- Adapter brackets for legacy VCs $ZEBRA-VC80x-Vehicle-Mounted-Computer-FIG-1 $12$$ $ZEBRA-VC80x-Vehicle-Mounted-Computer-FIG-1 $13$$ $ZEBRA-VC80x-Vehicle-Mounted-Computer-FIG-1 $14$$
Step 3:
Scanners
- When shopping for scanner cables, choose between coiled or straight for your scanner and between an RS232 or USB plug.
- Scanner Cables for LI/DS36XX
- Scanner cables for LS/DS 34XX/35XX
- Scanner holders $ZEBRA-VC80x-Vehicle-Mounted-Computer-FIG-1 $15$$ $ZEBRA-VC80x-Vehicle-Mounted-Computer-FIG-1 $16$$ $ZEBRA-VC80x-Vehicle-Mounted-Computer-FIG-1 $17$$
Step 4:
Keyboards, Keyboard Cables and Keyboard Mounting Options $ZEBRA-VC80x-Vehicle- Mounted-Computer-FIG-1 $18$$
Step 5:
Antennas $ZEBRA-VC80x-Vehicle-Mounted-Computer-FIG-1 $19$$
Step 6:
Voice $ZEBRA-VC80x-Vehicle-Mounted-Computer-FIG-1 $20$$
Step 7:
Miscellaneous $ZEBRA-VC80x-Vehicle-Mounted-Computer-FIG-1 $21$$
Step 8:
Service Parts $ZEBRA-VC80x-Vehicle-Mounted-Computer-FIG-1 $22$$