XU20ASCL Hamster Pro Trio Fingerprint Sensor
User Manual

XU20ASCL Hamster Pro Trio Fingerprint Sensor

Thank you for your interest in SecuGen fingerprint technology. We focus all our efforts on creating the highest possible quality in fingerprint sensor technology at an affordable price. We hope that this product meets your requirements, and we welcome your feedback.

Copyright © SecuGen Corporation. All rights reserved. SecuGen and Smart Capture are trademarks or registered trademarks of SecuGen Corporation in the United States and other countries. All other marks may be the property of their respective owners. Information in the document is subject to change at any time without prior notice.

General Description

Hamster Pro Trio is a combination fingerprint reader and smart card reader that supports the USB (Universal Serial Bus) 2.0 interface, utilizes the Plug & Play architecture, and is hot swappable. The Hamster Pro Trio is RoHS compliant and is compatible with the Hamster Pro 20™ fingerprint reader (model HU20-A) with regard to fingerprint functionality. The smart card reader in the device is 100% compatible with the Identiv CLOUD 2100R smart card reader.

Key Features

• Auto-On™ Automatic Finger Detection
• Smart Capture™
• USB 2.0 compliant
• FBI FIPS 201, PIV and FAP 20 Mobile compliant fingerprint sensor
• USB bus-powered device
• Device drivers and fingerprint SDKs available for most popular operating systems (Windows, Linux, Android)
• ISO 7816 & EMV Level 1 compliant smart card reader
• ISO/IEC 18092 NFC, ISO 14443 Type A & B, MIFARE, FeliCa compliant contactless card reader
• PC/SC and CCID compliant card reader

Possible Applications

• PIV (Personal Identity Verification) and CAC (Common Access Card) Applications
• Physical and Logical Access Control
• Time and Attendance

Technical Specifications

General

Dimensions| 80 mm (W) x 100 mm (L) x 45.5 (H) mm
Operating Temp. / Humidity| 0°C — 55°C / 90% RH (max., non-condensing)
Weight| 185 g
Supply Voltage| 5.0V DC + 5% via USB connection
Current Consumption| 300mA (max.)
USB Interface| 12.0 Full-Speed, 2.0 Hi-Speed (fingerprint reader only)
Certifications/Environmental| FCC, CE, RoHS, Microsoft WHQL, FIPS 201
Operating Systems Supported| Windows 11 / 10 / 8.1 / 8 / 7, Windows Server 2016 / 2012 / 2008 R2, Android 3.1+, Linux
Fingerprint Reader
Model| SecuGen® U20-ATM Optical Fingerprint Reader
Image Resolution| 500 PPI
Image Size| 300 x 400 pixels
Effective Sensing Area| 15.24 mm x 20.32 mm
Image Grayscale| 256 levels (8-bit)
Light Source / Typical Lifetime| LED / 60,000 hours
Fingerprint Capture Time| 0.2 — 0.5 second with Smart CaptureTM
Contactless Smart Card Reader
Model| Compact Contactless Smart Card Reader
Standards| ISO/IEC 18092, ISO/IEC 14443 Type A & B, ISO/IEC 15693
Protocols| T=CL (translated to T=1 for PC/SC compliance)
Operating Frequency| 13.56 MHz
Reading Distance| Up to 50 mm (depending on tag type)
Smart Card ReadNVrite Speed| Up to 848 kbps
Supported Card Types| ISO/IEC 14443-4 Type A & B Cards, ISO/IEC 15693-3 Cards, MIFARE series, FeliCa, Calypso, NFC Tags
SAM Card Interface| ISO/IEC 7816, T=0, T=1 protocols
Supported APIs| PC/SC
Compliance| ISO/IEC 18092, ISO/IEC 14443, ISO/IEC 15693, ISO/IEC 7816, USB 2.0 Full Speed, CCID
Contact Smart Card Reader

Model| Contact Smart Card Reader
General| Self-clocking internal oscillator, no external oscillator required 5.0 V supply input with built-in voltage regulator
Internal voltage supervisor for 4.8V
Low power consumption
Small size QFN-16 package
Status LED
Processor| 9X 80051 processor @ 16MHz.
OTP (One time programmable) ROM
USB| 12 Mbps USB Operation Compliant to the USB 2.0 Specification Integrated USB 1.5K pull-up resistor USB TID number: TID 40001362
Number of pipes used: 4 (control, Bulk-in, Bulk-out and Interrupt) CCID compliant firmware
Supports Remote Wake-up Capability for card insertion/removal
Smart Card| Fully Compliant with ISO/IEC 7816, EMV, and PC/SC Standards Full Support of both T=0 and T=1 protocols
Supports Class A, Class B, Class C
Short circuit protection on smart card section
Maximum smart card clock frequency: 4.8Mhz
Maximum baud rate: 600Kbps @FI/DI-97
Certifications| EMV 2008 Level 1, UL 60950, USB IF, UL92, GSA, ANZ, ICES-003 Issue 4, VCCI

Dimensions

Ordering Information

smart card device assembly, including U20-A optical fingerprint module and USB cable
| |
Cable options| Suffix:|
| NC| Unit without USB cable
| S| Unit with short USB cable
| M| Unit with micro USB cable
| MS| Unit with short micro USB cable
| C| Unit with type C USB cable
| SC| Unit with short type C USB cable

SecuGen Corporation
2065 Martin Avenue, Suite 102, Santa Clara, CA 95050, USA
Tel: +1 408-727-7787

SecuGen Korea (manufacturing company)

506 Jungwoo venture town 1cha, 8, Haebong-ro 330beon-gil, Danwon-gu, Ansan-

city,
Gyeonggi-do, South Korea, 15425.
Tel: +82) 70-7762-5309

FCC Compliance Statement

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

CAUTION: This equipment complies its antenna must not be co-located or operation in conjunction with any other antenna or transmitter.
NOTE: The SecuGen Corporation is NOT responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment.
This equipment complies with FCC RF exposure requirements set forth in an uncontrolled environment and can be used without any restriction.

Copyright ⓒ 2022. Lab-T, Inc.
SG1-XXXXX-000
CONFIDENTIAL

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>