AZZA Neo Desktop PC Case User Manual

AZZA Neo Desktop PC Case

Specifications

Chassis Parts

1. Front panel
2. Metal side panel
3. Tempered glass panel
4. Removable magnetic mesh
5. Hard disk cage
6. 3.5″ HOD/ 2.5″ SSD brackets
7. Chassis
8. Logo panel
9. Power supply rack
10. Dust filter mesh

Control Panel Functions

3.5 “/ 2.5” HDD/SSD Installation

• Multifunctional hard disk bracket support 3.5″ HOD or 2.5″ SSD x 1 ( A )
• Multifunctional hard disk hole support 2.5″ sso x 2 ( B )
• Multifunctional hard disk cage support 3.5″ HOD or 2.5″ SSD x 1 ( C )

Remove the Front Pane/ Instructions

Cooling System Installation

Front

Top

Rear

Remove the Tempered glass panel Instructions

Master Fan & Sub-fan Installation

PSU Fans Installation

PSU Rack Installation

Fan Installation

• Before the fan starts, please make sure the PWM connector 4 and SATA connector 5 each are connected.
• Press the LED button to cycle through different RGB lighting modes, all ARGB devices are controlled by the LED button. (make sure the other 3pin ARGB devices are connected with 6 )
• Ensure 2 insert the motherboard and hold the LED button for 3 seconds to switch the RGB control function to the motherboard RGB sync. software. Press 1 second LED button, and switch the RGB control function to the LED button.

RGB Lighting Switching

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>