artika VAN-FIC-HD2BL Finley LED Vanity Light Instruction Manual
- June 13, 2024
- artika
Table of Contents
artika VAN-FIC-HD2BL Finley LED Vanity Light
Product Information
Product Name: LED vanity light – FinleyTM
Model: FinleyMR
Revision: 05-07-2023
Package Contents
- Mounting bracket
- Junction box screw
- Canopy screw
- Light fixture
- Screwdriver
Important Notices
- Read the instruction manual carefully and keep it for future reference.
- Turn off the breaker at the panel to avoid electrical shock.
- Switch off the main electrical supply before installation or maintenance.
- Do not use the product outdoors.
- Ensure the dimmer used is LED compatible.
- Installer and user must read, understand, and followinstructions.
- Product must be properly installed to avoid malfunction.
- Installation and operating instructions must be followed to maintain warranty coverage.
- It is recommended to have a certified electrician install the product.
- Check local regulations for specific installationrequirements.
Tunable White Technology The product features tunable white technology with three colortemperatures: 3000K, 4000K, and 5000K.
Compliance
- Canada (IC): Operation is subject to certain conditions to prevent interference.
- USA (FCC): Operation is subject to certain conditions to preventharmful interference.
Warranty The warranty is valid only if the product is installed in accordance with building codes and laws, as well as the provided instruction manual. Incorrect installation or abnormal use will void the warranty. Product inspection and verification may be required for warranty claims.
Product Usage Instructions
- Turn off the breaker at the electrical panel.
- Switch off the main electrical supply from the fuse box or circuit breaker.
- Ensure the product is not used outdoors.
- If using a dimmer, make sure it is LED compatible.
- Read and understand the instruction manual beforeinstallation.
- Properly install the mounting bracket using the provided screws.
- Connect the wires, ensuring the ground wire (GND) is connected to the corresponding terminal.
- Install the light fixture onto the mounting bracket.
- Use the tunable white technology to adjust the color temperature according to preference.
- Comply with applicable regulations and standards for operation,including interference prevention.
- For warranty claims, follow the provided warranty guidelines and return any required product or component parts for inspection and verification.
INCLUDED HARDWARE
ITEM
| DESCRIPTION
| QUANTITY
---|---|---
|
Mounting bracket Support de
|
× 1
|
Junction box screw
|
× 2
| Wire connector Capuchon de|
× 3
| Canopy screw Vis de la base|
× 2 + 1 extra
|
Light fixture Luminaire
|
× 1
WHAT YOU WILL NEED
INSTALLATION
STEP-BY-STEP INSTALLATION
CAUTION
- WARNING:
Risk of electrical shock.
Turn off breaker at the panel.
Switch off the main electrical supply from the fuse box/circuit breaker before
installing the unit or doing any maintenance.
Do not use outdoor.
CAUTION
If using a dimmer, it must be LED compatible.
IMPORTANT
The installer and/or user must read, understand and follow these instructions
before installing the product. This product must be properly installed before
it is used. If instructions are not followed, the manufacturer will not be
held responsible for any problems or product malfunction. Failure to follow
installation and/or operating instructions voids the warranty.
We recommend that this product be installed by a certified electrician. In
some states or provinces, it is a legal requirement for this type of product
to be installed by a certified electrician, according to the electrical and
building codes effective in the region where the unit is used.
MOUNTING BRACKET INSTALLATION
CONNECTING THE WIRES
FIXTURE INSTALLATION
TUNABLE WHITE TECHNOLOGY
CANADA (IC)
Operation is subject to the following two conditions:
- this device does not cause interference,and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC STATEMENT
WARNING:
Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device does not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit that the receiver is not connected to.
- Consult the dealer or an experienced radio/TV technician for help.
WARRANTY
Artika For Living Inc. is proud to offer you a five-year (5) limited
warranty on manufacturing defects from the date of purchase for residential
use only. The warranty is extended to the original owner in the USA, Canada,
Mexico,
the UK, Iceland, France and Spain and is non-transferable. It does not apply
to retailers, commercial applications or establishments. The original sales
receipt is required for all warranty claims. The remedy under this limited
warranty shall be product or part replacement at Artika’s discretion as
provided herein and may not exceed the original purchase price.
This warranty is valid only on products installed in accordance with the
building code and laws in effect in the region where the unit is being used,
as well as in accordance with the provided instruction manual. It does not
cover products installed incorrectly or subjected to abnormal use. You may be
required to return product(s) or component part(s) for inspection and
verification.
Normal wear and tear, misuse, negligence, vandalism, improper maintenance
(surface damage due to chemical interaction or cleaning agents including, but
not limited to, scouring pads, use of cleaners containing abrasives, alcohol
or other organic solvents) improper handling, accident, abuse, fire, flood,
theft, acts of God, neglect, or alteration of the product will not be covered
under this limited warranty. It excludes any accessories that accompany the
product including, but not limited, to bulbs or batteries.
This warranty does not cover handling, labour, transportation or any other
cost associated with the installation or replacement of the product. This
limited warranty is valid in the country of purchase and for products sold by
Artika authorized retailers only.
Artika for Living Inc. will not be held responsible for any direct or
consequential damages or injuries related to the use of this product arising
from improper use or installation.
Please visit www.artika.com to discover more about
Artika for Living Inc.
Artika For Living Inc.
- 1756, 50th Avenue Montréal (Lachine), Québec Canada H8T 2V5
- 1-866-661-9606
- support@artika.com
- www.artika.com
Customer Service Monday to Friday 9 am – 5 pm EST
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>