V-TAC VT-307 LED Recessed Light Instruction Manual

: June 4, 2024
: V TAC

Table of Contents

TECHNICAL DATA
INTRODUCTION & WARRANTY
INSTALLATION DIAGRAM:
Documents / Resources

VT-307 LED Recessed Light
Instruction Manual V TAC VT 307 LED Recessed Light

TECHNICAL DATA

MODEL	VT-307	VT-607	VT-1207	VT-1807	VT-2207	VT-2407	VT-3107
WATTS	3W	6W	12W	18W	22W	24W	30W/36W

DIRECT CONNECT
VOLTAGE| DC: 5-12V| DC: 12-18V| DC: 24-48V| DC: 36-72V| DC: 50-80V| DC: 54-100V| DC: 75-144V
BEAM ANGLE| 120°| 120°| 120°| 120°| 120°| 120°| 120°
CRI| >80| >80| >80| >80| >80| >80| >80
OPERATION
TEMPERATURE| -20°C to +40°C| -20°C to +40°C| -20°C to +40°C| -20°C to +40°C| -20°C to +40°C| -20°C to +40°C| -20°C to +40°C
DIMENSION| 084x12mm| 0120x12mm| e170x12mm| 0225x12mm| 0240x12mm| e300x12mm| 0300x12mm
CUT OUT SIZE| 073mm| 0100mm| 0155mm| 0210mm| 0220mm| 0280mm| 0280mm

INTRODUCTION & WARRANTY

Thank you for selecting and buying the V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any other queries, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at their best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours of Daily operation. Usage of the product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.

WARNING!

Please make sure to turn oﬀ the power before starting the installation.
Installation must be performed by a qualiﬁed electrician
The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
For indoor use only

| This marking indicates that this product should not be disposed of with other household wastes.
---|---
| Caution, risk of electric shock.
| Luminaires are not suitable for covering with thermally insulating material.
| Non-replaceable control gear
| Non-replaceable light source

INSTALLATION DIAGRAM:

V TAC VT 307 LED Recessed Light - INSTALLATION DIAGRAM

INSTALLATION INSTRUCTION
Step 1: Decide where you want to place the panel and cut a hole as per the cutout size provided.
Step 2: Connect the Live and Neutral wires
Step 3: Hold the two clips back against the panel light and push them into the hole. Allow the springs to pull the light up to the ceiling.
Step 4: Switch ON the power and test

IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B

**2 YEARS WARRANTY***