CHESTO 9500 Lumen Beamer FULL HD Projector User Manual
- June 13, 2024
- CHESTO
Table of Contents
CHESTO 9500 Lumen Beamer FULL HD Projector
Product Information:
- Product Name: Beamer
- Package Contents:
- Beamer
- Power cable
- HDMI cable
- Remote control
- Built-in dust filter
- Languages: Nederlands
Product Usage Instructions
Warning:
- Do not look into the lens while the projector is running.
- Disassemble the projector by a technician to ensure normal operation.
- Unplug the power cord if the projector is not used for a long time.
- Use a dry, soft cloth to wipe the projector.
- Do not place the projector in a damp environment to prevent electrocution.
- Do not cover the ventilation openings on the sides of the projector.
Projection Distance & Size:
The recommended projection screen size is approximately 100 inches at a
distance of about 3 meters. It is recommended to use the projector in dark
environments with low light.
Function Overview:
- Infrared receiver
- Power on/off OK button
- Back, Left, Right, Up, Down, Menu buttons
- Keystone correction
- Adjustable tilt foot
- Lens
- Focusing knob
- Air intake
- Power input
- USB, Audio output
- IR receiver
- HDMI input
Quick Start:
- Insert batteries into the remote control.
- Plug in the power cord.
- Remove the lens cap.
- Adjust the adjustable foot.
- Press the power on/off button on the remote control to turn off the projector.
- Place the projector on a flat surface.
- Press the power on/off button to turn on the projector.
- Tear off the rubber gaskets on the four corners of the bottom of the projector and install the projector on the ceiling.
Focus Adjustment:
Rotate the focus knob to focus until the image is clear.
Keystone Correction:
Press the button on the remote control to open the interface for adjusting the
projection image. You can choose from two different keystone correction
methods. You can also access this function through the following path:
Homepage – Settings – Projection Image Settings – Keystone Advanced – Vertical
Keystone – Horizontal Keystone.
Input Source:
The projector supports various input sources such as iOS device mirroring via
USB connection, HDMI connection, and Android device mirroring.
Language Setting:
- Select “Settings” on the projected image.
- Select “Other settings” – “Language setting” on the projected image.
- Select the desired language.
Bluetooth Connection:
- Select “Settings” on the projected image.
- Select “Bluetooth settings” on the projected image.
- Turn on the Bluetooth function and wait for the connection.
Please read this manual thoroughly before use and keep it handy for future reference.
PACKING LIST
WARNING
- Do not look at the lens while the projector is working.
- Must be disassembled by a technician to ensure its normal operation.
- Unplug the power cord if the projector is not used for a long time.
- Please use a dry soft cloth to wipe the projector.
- Do not place the projector in a damp environment to avoid electrocution.
- Do not cover the vents on the side of the projector.
PROJECTION DISTANCE & SIZE
The recommended projection screen is around 100 inches with a distance of around 10.04ft. It is recommended to use the projector in dark and low light environments.
FUNCTION OVERVIEW
Open the cover on the bottom and take out the dust filter for cleaning
QUICK START
- Please install the batteries for the remote control.
- Plug the power cord into an outlet.
- Take off the lens cover.
- Rotate the adjustable foot.
- Place the projector on a flat surface.
- Press the power button to turn on the projector.
- Pressthe power button on the remote control to turn off the projector.
- Tear off the rubber gasketson the four corners of the bottom of the projector, and install the projector on the ceiling.
- Go to Setting » Projection Image Setting » Projection Mode to flip the projection image.
(This product does not include the projector ceiling mount)
FOCUS
Rotate the focus knob to focus until the picture is clear.
KEYSTONE CORRECTION
Press the＂ ＂button on the remote control, enter the projection image setting
interface. You can choose two different keystone correction methods.
You can also find this function through the following path.
Homepage→Setting→Projection Image Setting
Keystone Advanced
Select “Keystone Advanced”→”Front”, select
“Vertical Keystone” and “Horizontal Keystone” to adjust the image.
Select “Digital Zoom” to adjust the picture,the zoom range is 50% to 100%.
Point Keystone
Take one point as the standard, adjust the other three points until the screen is rectangle.
INPUT SOURCE
LANGUAGE SETTING
- Select “Setting” on the projection image.
- Select “Other Setting”→”Language Setting” on the projection image.
- Select the language you want to use.
BLUETOOTH CONNECTION
- Select “Setting” on the projection image.
- Select “Bluetooth Setting” on the projection image.
- Turn on the Bluetooth function and wait for the projector to search for available Bluetooth devices.
WIFI CONNECTION
- Select “Setting” on the projection image.
- Select “WiFi Setting” on the projection image.
- Wait for the projector to search for available networks.
- Choose your network name and enter the password to connect.
(Ensure you have your own WiFi at home. If not, please open your phone personal hotspot to create the WiFi, and then connect to it.)
WIRELESS SCREEN MIRRORING
For iOS Device
- Make sure that your iOS device is connected to the same network as your projector.
- Select “HummingBirdCast” on the projection image.
- On your iOS device, open “Control Center” and tap “Screen Mirroring”.
- . On your iOS device, looking for devices that can be mirrored on.
- Select “Projector-XXXX” from the list.
For Android Device
- Select “MiraCast” on the projection image.
- . Turn on the wireless projection function of your Android device.
- On your Android device, looking for the signal of the projector device.
- Select “Projector-XXXX” from the list.
WARM TIPS
- Due to the built-in LED bulb, heat will be generated when the projector is working. Don’t worry, this is normal.
- Due to HDCP copyright restrictions, when using screen mirroring to connect to a mobile phone, this projector does not support playing videos from platforms such as Netflix, Amazon Prime Video, and Hulu.
- The fluency of wireless projection depends on the connected network and your phone model.
- The USB interface can only be connected to USB flash disk. If your USB flash disk capacity exceeds 32GB, the format should be modified to NTFS.
- When using the wired projection function, please use the USB-C/Lightning to HDMI data cable.
- When your devices are connected via HDMI and USB ports, parameters such as brightness and contrast can be adjusted. When the projector is playing video, press the menu button on the remote control to enter the setting, you can choose a variety of modes, adjust the picture and sound parameters.
- If the remote control is lost, we will send a new one to you. If you have any operational problems, please let us know, and we will send operational steps and instructional videos to help you.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>