Q ACOUSTICS 3000i Speaker Stand Pair User Manual
- June 13, 2024
- Q ACOUSTICS
Table of Contents
Q ACOUSTICS 3000i Speaker Stand Pair
Product Information
The ACOUSTICS 3000i Speaker Stand Pair is designed for use with the 3010i and 3020i speakers. It is a manual speaker stand that comes with various parts for assembly.
- Parts included: 12 x screws, 4 x base plates, 2 x speaker brackets, 8 x screw caps, and 8 x rubber feet.
Product Usage Instructions
- Begin by unpacking all the parts and ensuring that you have all the necessary components.
- Take the base plates (4x) and attach them to the bottom of each speaker stand using the provided screws (12x). Use a screwdriver to tighten the screws securely.
- Once the base plates are attached, place the speaker brackets (2x) on top of each stand, aligning them with the holes on the stands.
- Secure the speaker brackets to the stands using the remaining screws (4x).
- After assembling the stands, place your 3010i or 3020i speakers onto the speaker brackets. Make sure they are properly aligned and centered.
- If desired, use the screw caps (8x) to cover the exposed screws on the speaker brackets for a cleaner look.
- Finally, attach the rubber feet (8x) to the base plates of each stand. These rubber feet help provide stability and minimize vibrations.
Please refer to the assembly diagram provided in the manual for a visual representation of the assembly process.
Parts
Assembly Instructions
Warning
- Do not use close to a strong heat source – radiators, heaters or electrical equipment.
- Do not expose the stands to excessive cold, heat, humidity or sunlight.
- To clean use a damp cloth with washing up liquid if necessary.
- Do not use abrasive cleaners or cleaners containing solvent.
- Do not overtighten the fixings.
- Spikes should be fitted where floors are carpeted, for all exposed floors – wood, tiled etc use the domed feet.
- To avoid damage when spikes are fitted take care to place the stand where it cannot mark furnishings or pierce mains cables etc.
- The spikes will not damage carpets.
ACOUSTICS
QACOUSTICS.CO.UK
Our policy is one of continuous product improvement.
We reserve the right to change the designs and specifications without notice.
This document contains information that is subject to change without notice
016674-IS r2
References
Read User Manual Online (PDF format)
Loading......