JBL Quantum 910 Wireless Gaming Headset User Guide
- June 4, 2024
- JBL
Table of Contents
- JBL Quantum 910 Wireless Gaming Headset
- WHAT’S IN THE BOX
- Requirements
- OVERVIEW
- Calibration microphone
- POWER ON & CONNECT
- Bluetooth
- SETUP
- BUTTON COMMAND
- First time setup
- MICROPHONE
- CHARGING
- LED BEHAVIOURS
- TECH SPEC
- IC RF Exposure Information and Statement
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
JBL Quantum 910 Wireless Gaming Headset
JBL Quantum ENGINE
Download JBL Quantum ENGINE to gain full access to features on your JBL
Quantum headsets – from headset calibration to adjusting 3D audio to suit your
hearing, from creating customized RGB lighting effects to determining how the
boom microphone side-tone
works.JBLquantum.com/engine
Software requirements
Platform: Windows 10 (64 bit only) / Windows 11
500MB of free hard drive space for installation
- Always use the latest version of Windows 10 (64 bit) or Windows 11 for the most optimal experience on JBL QuantumENGINE
- JBL Quantum SPHERE 360 and DTS Headphone V2.0 available on Windows only. Software installation required.
JBL Quantum SPATIAL 360
Available on PlayStation (PS4/PS5) and Nintendo Switch
WHAT’S IN THE BOX
Requirements
JBL SOFTWARE REQUIREMENTS
Platform: Windows 10 (64 bit only) / Windows 11 500MB OF FREE HARD DRIVE
SPACE FOR INSTALLATION
System compatibility
Connectivity| PC| PS4/PS5| XBOX™| Nintendo Switch™|
Mobile| MAC
---|---|---|---|---|---|---
3.5 mm Audio Cable| Stereo| Stereo| Stereo| Stereo| Stereo| Stereo
2.4GHz Wireless| | | Not Compatible| | Not Compatible|
Bluetooth| Stereo| Not Compatible| Not Compatible| Stereo| Stereo| Stereo
OVERVIEW
- ANC / TALKTHRU LED
- ANC / TALKTHRU button
- Game audio-chat balance dial
- Volume Control
- Detachable Windshield foam
- Notification LED for mic mute / unmute
- Microphone Mute / unMute
- CHARGING LED
- 3.5 mm Audio Jack
- USB-C port
- voice Focus Boom Microphone
- SPATIAL SOUND / HEAD TRACKING CONTROL
- Power on / off and Bluetooth pairing slider
- POWER / 2.4GHz / Bluetooth LED
- RGB Lighting Zones
- Flat-fold ear cup
- 2.4GHz PAIRING BUTTON
- Volume Control
- MIC MUTE BUTTON
Calibration microphone
POWER ON & CONNECT
Bluetooth
SETUP
BUTTON COMMAND
First time setup
- 9a Connect the headset to your PC via 2.4GHz USB wireless connection.
- 9b Go to “Sound Settings” -> “Sound Control Panel”.
- 9c* Under “Playback” highlight “JBL QUANTUM910 WIRELESS GAME” and select “Set Default” -> “Default Device”.
- 9d Highlight “JBL QUANTUM910 WIRELESS CHAT” and select “Set Default” -> “Default Communication Device”.
- 9e Under “Recording” highlight “JBL QUANTUM910 WIRELESS CHAT” and select “Set Default” -> “Default Device”.
- 9f In your chat application select “JBL QUANTUM910 WIRELESS
- CHAT” as the default audio device.
- 9G Follow the onscreen instructions to personalize your sound settings.
-
- If you have not installed JBL QuantumEngine, ensure to complete this step before enabling JBL QuantumSPATIAL 360.
MICROPHONE
CHARGING
LED BEHAVIOURS
TECH SPEC
- Model: QUANTUM910WIRELESS
- Driver size: 50 mm Dynamic drivers
- Frequency response (Passive): 20 Hz – 40 kHz
- Frequency response (Active): 20 Hz – 20 kHz
- Microphone frequency response: 100 Hz – 8 kHz
- Max input power: 30 mW
- Sensitivity: 111 dB SPL / 1 mW
- Maximum SPL: 93 dB
- Microphone sensitivity: -38 dBV / Pa @1 kHz
- Impedance: 32 ohm
- 2.4GHz Wireless transmitter power: <13 dBm
- 2.4GHz Wireless modulation: GFSK, π/4 DQPSK
- 2.4GHz Wireless carrier frequency: 2400 MHz – 2483.5 MHz
- Bluetooth transmitted power: <13 dBm
- Bluetooth transmitted modulation: GFSK, π/4 DQPSK
- Bluetooth frequency: 2400 MHz – 2483.5 MHz
- Bluetooth profile version: A2DP v1.3, HFP v1.8
- Bluetooth version: BT Core v5.2
- Battery type: Li-ion battery (3.7 V / 1300 mAh)
- Power supply: 5 V 2 A
- Charging time: 3.5 hrs
- Music play time with BT+2.4GHz on and ANC+RGB lighting off: 34 hrs
- Talk time with BT+2.4GHz on and ANC+RGB lighting off: 38 hrs
- Music play time with only 2.4GHz on and ANC+RGB lighting off: 39 hrs
- Talk time with only 2.4GHz on and ANC+RGB lighting off: 44 hrs
- Music play time with only BT on and ANC+RGB lighting off: 45 hrs
- Talk time with only BT on and ANC+RGB lighting off: 47 hrs
- Microphone pickup pattern: Unidirectional
- Weight: 420 g
IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue.
Device types: (IC: 6132A-JBLQ910WL) has also been tested against this SAR
limit According to this standard, the highest SAR value reported during
product certification for head use is 0.106 W/Kg.
The device was tested for typical bodily operations where the product was kept
0 mm from the head. To maintain compliance with IC RF exposure requirements,
use accessories that maintain a separation distance of 0mm between the user›s
head and the back of the headset. The use of belt clips, holsters and similar
accessories shall not contain metal parts in its assembly. Use of accessories
that do not meet these requirements may not comply with IC RF exposure
requirements and should be avoided.
IC RF Exposure Information and Statement for USB Wireless Dongle
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue.
Device types: (IC: 6132A-JBLQ910WLTM) has also been tested against this SAR
limit According to this standard, the highest SAR value reported during
product certification for head use is 0.548 W/kg.
Head operation
The device was subjected to a typical head manipulation test. In order to
comply with RF exposure requirements, a minimum separation distance of 0 cm
must be maintained between the user›s ear and the product (including the
antenna). Head exposure that do not meet these requirements may not meet RF
exposure requirements and should be avoided. Use only the supplied or approved
antenna.
IC: 6132A-JBLQ910WL
Body operation
The device was tested for typical bodily operations where the product was kept
with 5 mm distance attaching away from the body. Non-compliance with the above
restrictions may result in violation of IC RF exposure guidelines. Use only
the supplied or approved antenna.
IC: 6132A-JBLQ910WLTM
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
References
- JBL Quantum Support
- JBL Quantum Support
- Product Registration
- Anatel — Agência Nacional de Telecomunicações
- Official JBL Store - Speakers, Headphones, and More!
- JBL Quantum
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>