TRILUX 2330 G3 M73 Square LED Panel Instruction Manual

: June 13, 2024
: TRILUX

Table of Contents

TRILUX 2330 G3 M73 Square LED Panel
Product Information: TRILUX twenty3 2330 G3 LED
Product Usage Instructions
Mounting
Assembly
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TRILUX 2330 G3 M73 Square LED Panel

TRILUX -2330- G3- M73- Square- LED -Panel - product
image

Product Information: TRILUX twenty3 2330 G3 LED

The TRILUX twenty3 2330 G3 LED is a lighting fixture that provides bright and energy-efficient illumination. It is designed for professional use and offers various safety features to ensure proper installation and usage.

Product Code: 10236493 | 230726
Mounting Instructions: DE MONTAGEANLEITUNG, EN MOUNTING INSTRUCTIONS, FR INSTRUCTIONS DE MONTAGE, IT ISTRUZIONI DI MONTAGGIO, ES INSTRUCCIONES DE MONTAJE, NL MONTAGEHANDLEIDING, PL INSTRUKCJA MONTAU
Safety Class: I, II
Protection Rating: IP20 (for general protection) and IP40 (for protection on the room side)

Product Usage Instructions

Before using the TRILUX twenty3 2330 G3 LED, please read and understand the following instructions:

Electrical Connection

WARNING! The electrical connection must be carried out by professional personnel who are trained and authorized. Never work with electrical voltage applied.

Installation

WARNING! The assembly must be carried out by professional personnel who are trained and authorized. Always wear clean installation gloves to prevent soiling.

Safety Precautions

Do not cover the product with insulating material.
The light source of this luminaire cannot be replaced. When the light source has reached the end of its service life, the whole luminaire should be replaced.

Further Wiring
The TRILUX twenty3 2330 G3 LED is suitable for further wiring. The maximum total current is 10 A at 1.5 mm2 or 16 A at 2.5 mm2.

Disposal of Waste Electrical and Electronic Equipment
Always collect and dispose of old electrical and electronic equipment separately at the end of its service life. Seek information about environmentally-compliant waste disposal from your local district authority or special waste disposal companies. For more detailed information, refer to the product data sheet available on the TRILUX website.

Current information on the energy efﬁciency class of the selected product version can be found in the corresponding data sheet for the luminaire. Instructions for replacing or removing the light source in accordance with Regulation 2019/2020/EU can be found at: www.trilux.com/EcoDesign

Explanation of the warning levels

Observe and follow the warnings. Non-observance of the warnings may lead to injuries or material damage!

WARNING: Indicates dangers which can result in serious and/or fatal injuries.
CAUTION: Indicates dangers which can result in injuries or health hazards.
NOTICE: Indicates dangers which can result in material damage or malfunctions.
TIP: Indicates information containing advice or a useful note.

Explanation of warning messages and instructional pictogram

WARNING: The electrical connection must be carried out by profession-al personnel who are trained and authorised.
WARNING: The assembly must be carried out by professional personnel who are trained and authorised.
WARNING: Risk of electric shock! Never work with electrical voltage applied.
NOTICE: Wear clean installation gloves to prevent soiling.

Safety instructions and safety labels

Insulating material
Do not cover the product with insulating material.

Type: ··· ETWD

Light source
The light source of this luminaire can-not be replaced! When the light source has reached the end of its service life the whole luminaire shall be replaced.

Electronic control gear units (ECG) A neutral conductor interruption in the three-phase circuit leads to overvoltage damage in the lighting system. Only open the neutral conductor isolating terminal in de-energised state, and close the neutral conductor isolating terminal before switching on again. Do not exceed the maxi-mum permissible ambient temperature ta of the luminaire. Exceeding this limit reduces the service life and in extreme cases there is a risk of premature failure of the luminaire. De-sign connection cables for the control inputs of DALI control gear (1-10 V, DALI etc.) to be 230 V mains voltage-proof (basic insulation).

Intended use

Safety class: I
Type: ··· ET ; ··· ETDD
Safety class: II
Type: ··· ETWD
Protection rating: IP20
Protection rating on room side: IP40
Suitable for further wiring. Max. total current 10 A at 1,5 mm2.
Suitable for further wiring. Max. total current 16 A at 2,5 mm2.

Conformity
Directive 2014/53/EU
Simpliﬁed EU Declaration of Conformity according to the RED Directive if the luminaire is equipped with a control gear unit with NFC interface or a radio component:
TRILUX hereby declares that the radio system type 2330 G3 … complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available on the Internet at: www.trilux.com/eu- conformity
TouchDim control (··· ETDD) TouchDim serves to control individual luminaires. The maximum number of permissible electronic control gear units (ECG) for one TouchDim control is max. 10. The overall cable length (push-button to last luminaire) must not exceed max. 25 m. When using several luminaires with a DALI control or a TouchDim control, TRILUX recommends using a DALI repeater. Otherwise, a synchronizations are possible due to disturbances in the building.