Beats Solo3 Wireless On-Ear Headphones User Guide
- June 13, 2024
- BEATS
Table of Contents
On-Ear Headphones
User Guide
Solo3 Wireless On-Ear Headphones
To
connect to iPhone with iOS 10 or later follow steps 1–3.
For all other devices see the back of this guide.
TURN ON BLUETOOTH®
Swipe up from the bottom of the screen and tap the Bluetooth® icon. 
CONNECT SOLO3 WIRELESS
Press power button for 1 second. Hold near unlocked iPhone, then follow onscreen instructions.
START LISTENING
Your Solo3 Wireless is now connected and ready to use. 
USE WITH YOUR OTHER APPLE
DEVICES
Solo3 Wireless now works with your other devices signed into iCloud. Select
Beats Solo3 in Control Center (iOS) or menu bar (macOS). 
WIRELESS CONTROLS
During wireless use, control music and manage calls with the “b” button.
Adjust volume above and below the “b” button. 
WIRELESS SETUP FOR OTHER DEVICES
- Press power button for 5 seconds. On your device, go to Bluetooth® settings and choose Beats Solo3.
WIRED PLAYBACK
Plug in RemoteTalk cable for wired mode to conserve battery or when battery is depleted.
WIRED CONTROLS
Control music, manage calls and adjust volume with RemoteTalk cable.
Functionality may vary on non-Apple devices.
CHARGE
Using a micro USB cable, plug in headphones to charge.
beatsbydre
@beatsbydre
beatsbydre
@beatsbydre
© 2016 Apple Inc. All rights reserved. Model: A1796. PA034-01424.
The b logo, beats, beats solo, remotetalk and solo are trademarks of Beats
Electronics, LLC
. Apple, iPhone, macOS and watchOS are trademarks of Apple Inc., registered in
the U.S. and other countries.
Android is a trademark of Google Inc.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and are used under license.
IOS is a trademark of Cisco and is used under license.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>