JORDAN JF-JA Helix Jammer Arm Attachments Instruction Manual
- June 13, 2024
- JORDAN
Table of Contents
JORDAN JF-JA Helix Jammer Arm Attachments
Product Information
The JORDAN Helix Jammer Arm Attachments – Pair (JF-JA) is a set of arm attachments designed to be used with a fitness rack. These arm attachments are used for various exercises and workouts to target different muscle groups in the upper body.
The product is made of high-quality materials and is designed for durability and stability during workouts. It comes with all the necessary parts and hardware required for assembly.
Product Usage Instructions
WARNING: Assembly of the product should only be undertaken by an individual who has the necessary tools and knowledge to do so.
Tools Required:
- 1 x Socket Wrench (13mm, 17mm, 19mm)
- 1 x Spanner (13mm, 17mm, 19mm)
Assembly Steps:
Step 1:
Use the M12x80 bolt (8), M12 Washer (12), and M12 Nut (15) to secure the Nylon
wheel (7) to the base of each arm (1).
Step 2:
Use the M10x20 bolt, M10 Washer (13), Nylon wheel (4), and M10 nut to attach
the arm to the side plates. Make sure to insert the bush (6) into the jammer
arm before bolting it to the side plates (3) and (2).
Step 3:
Attach the side plates (3) to either side of the rack uprights using the
M8x110 bolt (9), M8 Washer (11), Nylon wheel (4), and M8 Nut (14) as shown in
the diagram.
Safety & Maintenance Checks:
After assembly, it is important to perform safety and maintenance checks on
the product regularly to ensure its safe and proper functioning. For any
safety concerns or maintenance queries, please contact JORDAN Fitness using
the following details:
Address: 56 Oldmedow Road, Hardwick Ind. Est. King’s Lynn, Norfolk, PE30 4JJ United Kingdom
Email: [email protected]
Phone: +44 (0) 1553 763 285
Website: www.jordanfitness.com
WARNING
Assembly of product should only be undertaken by an individual who has:
- Read and understood this manual
- Is familiar with assembling similar equipment
TOOLS REQUIRED
- 1 x Socket Wrench (13mm, 17mm, 19mm)
- 1 x Spanner (13mm, 17mm, 19mm)
PARTS INCLUDED
Assembly
-
STEP 1
Use M12x80 bolt (8), M12 Washer (12) and M12 Nut (15) to secure Nylon wheel (7) to the base of each arm (1) -
STEP 2
Use M10x20 bolt, M10 Washer (13), Nylon wheel (4) and M10 nut to attach arm to side plates. Ensure bush (6) is inserted into jammer arm prior to bolting to side plates (3) and (2)
-
STEP 3
Attach side plates (3) to either side of rack uprights using M8x110 bolt (9), M8 Washer (11) Nylon wheel (4) and M8 Nut (14) as per diagram
Safety & Maintenance Checks
Our service starts from as little as £199.
At Jordan we believe in Quality and strive to supply only premium products
that we know will last…. but even the best products need a little care and
attention.
To keep your kit in tip top shape we offer annual maintenance services on all
your Jordan Equipment.
Once our checks are completed, you will receive a detailed report of all works
undertaken and peace of mind that your kit is safe, functioning and the best
it can be for your clients.
56 Oldmedow Road, Hardwick Ind. Est. King’s Lynn, Norfolk, PE30 4JJ United
Kingdom
Registered in England 3267100 E&OE
+44 (0) 1553 763 285
[email protected]
www.jordanfitness.com
© 2022, JORDAN FITNESS LTD
References
- Jordan Fitness | Commercial Gym Equipment & Gym Design | Commercial Gym Equipment Suppliers | Functional Fitness Specialists
- Jordan Fitness | Commercial Gym Equipment & Gym Design | Commercial Gym Equipment Suppliers | Functional Fitness Specialists
- Jordan Fitness | Commercial Gym Equipment & Gym Design | Commercial Gym Equipment Suppliers | Functional Fitness Specialists